TRACTOR WEIGHTS

[Don87]

Don't forget that Rimguard weighs about 3 pounds more per gallon. Costs more, but weighs more.

 

[600rider]

The shop where I work has a job where we use 3/4" plate steel and burn "windows" in it. I purchased some of the cutouts and had them machined by the guy on the machine next to mine. First I made a bracket that I slide on to the front bumper then just hang the weights on it. I have 10 of them and I think they weigh 25# each. I have a B7510 21hp 4x4 hsd they work great to hold the front down! :thumbsup:

 

[Soundguy]

must be nice..

soundguy

 

[600rider]

and only $.15 a pound!!!!

 

[Soundguy]

scrap prices no less..

 

[600rider]

less than scrap price!!!!
:thumbsup:

 

[Soundguy]

brag brag brag..


good for you though!

soundguy

 

[600rider]

Not braggin.....jus sayin!!! :laughing:

 

[Soundguy]

naw.. good for you. I like it when i find a deal.. I like it when my friends and aquaintences find a deal too.

soundguy

 

[600rider]

we need a "LIKE" button on here like Facebook does!! :thumbsup:

 

[clemsonfor]

Ok here i go, i finially got around to posting the picture of my tractor weights. The bar on the bottom is solid 3" steel bar stock about 40 something inches wide, the top pipe is about 3" ID and filled with lead. Both welded togeather tip the scales somewhere around 175 lbs. Thats about a 6ft hunk of Rail hanging off the back back there my guess on it is just shy of 400lbs?

 

[hinsolar]

I have a YM2000 and I need to know where I can get Weights for the rear wheels and front - end of my tractor.

 

[gunnner]

If I had the time I would have fabricated some as some on here have done------But I had not the time so I bought some from my dealer.
I think your YM dealer can get them for you----but be prepared---they be high $$$$$:smiley_aafz:

 

[hinsolar]

Thank you