Tree Puller

Jag · Apr 28, 2001

TraderMark, I took the picture you posted and a sketch down to the local fab shop and had a treepuller buildt. Cost $140 plus $5 for the pens. I had it built with dual holes at all the pick-up points, to fit both cat I and II lifts so my neighbor can use it on his big tractor.. It does great.. Will take a little getting use to. Worked it about 3 hours yesterday mostly scrub brush and a old plum thicket... Found that cider is the worst to do, oh they come right out of the ground but really hang in the teeth. Pulled a 5 inch elm with out a problem. Some of the other 4 inchers had to work a little.. Really like the attachment. Will get some use out of it... If I get a chance I will try to post a picture later.. Thanks...

Billc · Apr 29, 2001

Yea, Jag, would love to see a picture of what you're talking about.

Bill Cook

Jag · Apr 29, 2001

Billc, The first post on this was by TraderMark. http://www.tractorbynet.com/forumfiles/33-40600-treegetter2.jpg Here is the link to it, and the picture.. hope it works... The puller works very well... If not the post was under "pushing back the woods" 04/06/01/ 11:57PM

gordon · Apr 29, 2001

Bill to give you an idea here is a link to the commerical version that hooks to the front bucket. The one that was built here was for the three point hitch and had about a third of the teeth. NICE

<font color=blue>brushbrute</font color=blue>

Here is the link to the post on TBN
<font color=blue>dimensions of the treegetter</font color=blue>

Hope this helps
Gordon