Trencher

/ Trencher #21  
I would like to see that in action. One thing looks to me will need more fabrication, is the ends of the trenching wheel. Something angled with more of a point to go in the ground. Maybe something on every other arm to dig and then the square pieces left on the other arms. I just don't see the squares on the wheel going in the ground but who knows, it just might work.
Either way, I envy your capabilities of building something like that!!
 
/ Trencher #22  
Ditch Witch calls them saws. Ditch Witch Saw Attachment

I have seen these in action and it was about 8' diameter and when it hit big rocks it jumped about 1' but it does break them pretty shortly after. It is also a fairly scary machine to watch.;)
 
/ Trencher #23  
I've never seen a saw used for much trenchwork,mostly seen them making cuts through road surfaces.
Buddy...I ain't in the habit of criticizing anothers fellas work....but please don't have the wife or kids watching when you try that out.Hope you have either shear pins or a slip clutch in there,she comes loose and you are gonna loose a tranny.
 
/ Trencher #24  
Lynkage said:
Ditch Witch calls them saws. Ditch Witch Saw Attachment

ya execpt theres one HUGE diffrenace..... the Ditchwitch version seems to be made from ONE solid plate of steel with attached cutters.

ppgh_1011.jpg


which wouldnt be a bad way to go if you could figure out how to attach teeth on it to dig a 4" wide trench....(or more)
 
/ Trencher #28  
I think a good rule of thumb for build it yourself is to copy an established design, but use more steel.

One option for a ditcher would be to find a salvage ditch witch and get the bar, chain, and gearbox off.

Be careful of yourr PTO clutch. They cost a lot to have replaced. Perhaps more than a used ditcher.
 
/ Trencher #29  
Please get the video camera on it when you first use it. We need to see this thing mangle. It will be fun to see. Maybe you can make money on it. I will pay $1 to see it.

Mike
 
/ Trencher #30  
Flywheel said:
Use a shear pin...or seven

LOL you guys crack me up

I gotta say, you hit a rock or God forbid a tree root and I have to think it's game over.
 

Marketplace Items

HYSTER S60FT STRAIGHT MAST FOKLIFT (A59823)
HYSTER S60FT...
8 TOOTHED BUCKET FOR MINI EXCAVATOR (A58214)
8 TOOTHED BUCKET...
1999 CATERPILLAR 312B EXCAVATOR (A52709)
1999 CATERPILLAR...
2020 DRAGON ESP 150BBL ALUMINUM (A58214)
2020 DRAGON ESP...
2018 FORD F-250 XL SUPER DUTY EXT CAB TRUCK (A59823)
2018 FORD F-250 XL...
1992 DFI PULL SPREADER (A57192)
1992 DFI PULL...
 
Top