TYM T474 3rd function kit options

[DonRybak]

A couple years ago I bought the factory kit for my RK37 which was built bu TYM. The kit even had a TYM part number on it. As ptsg said the install was more or less hassle free due to the hydraulic lines being precut to correct lengths. Very neat install. Mine is a cabbed model so removing the paneling to get to the hydraulic joystick was a pain. You didn't mention what year your tractor is but mine is a 2018 and at that time they didn't come with a two button joystick already installed as they do now. If your tractor doesn't already have the 2 button joystick make sure the kit you get comes with one. If you have a cabbed model and have to replace the joystick that's the biggest hassle of all. The TYM kit even came with a new FEL cross member that the diverter valve mounts on so there not even any drilling involved for mounting hardware. Very happy with mine.

 

[Wannabe Hillbilly]

I’ve been browsing for the past couple of weeks on 3rd function kits for the 474 and can’t seem to get an answer on if the universal kits sold (they’re about half the cost of the tractor specific ones im seeing) will work on the tractor. Any input would be great and small businesses to recommend buying them from also. Thanks

I know this is an old thread but am curious what you ended up going with for a 3rd function kit on your T474. I bought my tractor about 6 months ago, used with 21 hours and is 2023. Unfortunately this was my first tractor purchasing experience and I was a complete noob. Therefore when it was sold to me they said it came with 3rd function, which I believed due to the factory installed joystick buttons. Once I got the tractor home I looked everything over to get somewhat familiar with my new machine. As you all know here, the tractor DOES NOT come with any 3rd function components other than the cheap buttons installed on the joystick. I think this marketing scam should warrant some sort of compensation straight from TYM, as well as the dealer that sold it. I certainly should've done my own research but I also think the same for the dealer who was selling the tractor

 

[DynamicD]

TYM makes a kit, it will vary depending on ROPS or cab model. They are good kits with steel lines that run down the loader to the pioneer fittings.
I have also seen the WR Long kit and its nice too but has hoses instead of steel lines (not a big issue in my opinion...they both get the job done)
, Im my locality the WR Long kit was not much cheaper than the TYM kit.
I would say the dealer who sold the tractor was misleading or just mistaken, In any TYM literature/ website I've never seen anything that falsely implies a unit comes with a third function. Its an add on for 99% of their tractors, Only a few of the big cab units have it standard.