Ultrasonic cleaner recommendations

[5030]

Depends on what I'm dunking, what solution I use. I dunk my handguns (minus the grips and optics all the time) in the Simple Green industrial cleaner and I use Berryman's B12 Chen tool for cleaning carbs and such. I even use it to clean my reloading die sets and I use a lye and water solution to clean the swarf from chainsaw loops prior to grinding then. Probably should have gotten an analog unit as well but the digital one I have works for my use.

Don't believe I'd buy the HF unit as it's pretty small and I tend to agree, bigger is always better with ultrasonic cleaners.

 

[Code54]

It is a decent size for sure. I have a smaller one which is good for carbs or pistol frames. The larger one will work for AR frames, and larger tractor parts. Both can easily clean the wife's jewelry and little household things. I mostly use Dawn and water for firearms and jewelry, simple green and water works for dirty tractor parts

 

[5030]

All basically the same actually and most are made in China. Only difference in them is tank size, number of transducers and if they are heated or not.

The transducers impart the high frequency vibrations to the tank. Nothing fancy about any of them actually.

Price is predicated in tank capacity.

 

[Gem99ultra]

Those of you who have them, what do you recommend? Size? Power? Brand/model?

Anything to look for / watch out for?

I've used them a lot for work, but never owned myself, but any use tips or tricks are welcome as well.

Thanks for any tips!

All the best,

Peter

I have the smaller version from Harbor Freight. The timer is limited to 4 minutes, which is useless. The size is far too small for anything larger than a ring, etc.. I do not recommend that unit.
As others will mention, go big, with a decent timer, small item basket, etc.. Cheap just doesn't cut it.

 

[ponytug]

If you’re looking for a good ultrasonic cleaner, I’d recommend Kaijo Shibuya. They have a solid reputation for making reliable, high-quality cleaners that work for all tasks.
What I like most is how efficient they are. You don’t need to soak or scrub forever—they do the job quickly. Plus, they have different sizes and power levels depending on your needs. Their customer service is also pretty good, which is a huge plus if you’re new to ultrasonic cleaners or have specific questions.
I’ve used mine for cleaning metal parts, and the results were always spotless. It’s an investment but worth it in the long run. Check them out at Ultrasonic Cleaning Tanks for Industrial Cleaning Applications.

How much did you pay for yours?

 

[geteh]

Those of you who have them, what do you recommend? Size? Power? Brand/model?

Anything to look for / watch out for?

I've used them a lot for work, but never owned myself, but any use tips or tricks are welcome as well.

Thanks for any tips!

All the best,

Peter Brawl stars

For power tools, I recommend going with Milwaukee, Makita, or DeWalt for reliability and performance. For size, an 18V or 20V cordless model is versatile enough for most tasks, offering a good balance of power and portability. If you need something more compact for tight spaces, 12V models are great.

Look for a tool with good ergonomics, especially if you'll be using it for extended periods. Battery life is crucial, so having an extra battery is always helpful.

Watch out for cheaper models, as they may not last as long or perform as well over time.

 

[ponytug]

For power tools, I recommend going with Milwaukee, Makita, or DeWalt for reliability and performance. For size, an 18V or 20V cordless model is versatile enough for most tasks, offering a good balance of power and portability. If you need something more compact for tight spaces, 12V models are great.

Look for a tool with good ergonomics, especially if you'll be using it for extended periods. Battery life is crucial, so having an extra battery is always helpful.

Watch out for cheaper models, as they may not last as long or perform as well over time.

Wrong thread? They don't make ultrasonic cleaners...

 

[RobertN]

Late to the party, but I got a Vevor 6l heated unit. Have been using it to clean wrenches, sockets and ratchets I've picked up at flea markets. Run them at 45C with Simple Green mix. Works great.

For delicate stuff like jewelry, run without the heater with water and a dash of Dawn dish shop. And, limit run to 5 minutes or less.

 

[MinnesotaEric]

Those of you who have them, what do you recommend? Size? Power? Brand/model?

Anything to look for / watch out for?

I've used them a lot for work, but never owned myself, but any use tips or tricks are welcome as well.

Thanks for any tips!

All the best,

Peter

You want a small one for carbs and a larger one for bigger stuff. Never put rusty stuff in the small one. I have a 5L and a 30L and you want to make certain they are filled up 3/4 full or they can burn themselves out. Yesterday I just had my 30L up to 170°F derustifying and cleaning up a Datson fuel sending unit from an injected 280Z and a replacement is unatainium, so I'm going to fabricate a new one with some parts from the old one.

Also, I use Simple Green Pro HD mixed with water to clean everything.

 

[JimRB]

I have a Crest 175HTA. Heated smaller unit.