welding machine adjuster

[notme]

Just some examples, how much force is needed?
This motor would work with those power supplies: 2RPM, 75 inch pounds, 0.8 Amps at 12VDC - 2 RPM 12 VDC GEARMOTOR
21 RPM 12VDC, 4.5amps at stall: 21 RPM 12 VDC RA GEARMOTOR. Would need this power supply: 5 amps at 12VDC with 100-240VAC input - Amazon.com: R-Tech UL Listed Regulated Power Adapter, 12VDC, 5 Amp for Surveillance Security Camera CCTV: Camera & Photo

Aaron Z

I guess I'd have to somehow adapt a torque wrench to it.. right now its just got a crank on top which winds the center field up and down inside the transformer? im not even sure how many cranks it would take from min setting to max... but I would never go down that low anyhow as I said I stay pretty much between 90-and max 155..i'll have to do some research

 

[Brad_Blazer]

Did you see this one in the Surplus Center link?
60 RPM 220 VAC 1/30 HP SHADED POLE GEARMOTOR

 

[DXN1EL]

Did you see this one in the Surplus Center link?
60 RPM 220 VAC 1/30 HP SHADED POLE GEARMOTOR

1.8 RPM 115 VAC GEARMOTOR 2051788

That one would work better, there 220V on machine ground and two 110V. Why not just grab the ground and one 110V?