What attachments did you THINK you needed but don't use much?

   / What attachments did you THINK you needed but don't use much? #91  
I have some questions for you guys that prefer your FEL to a box blade. What type of grading are you doing with your FEL? What do you do when you need one side lower than the other? :confused:
I use the Tilt Tach. Great when using forks too.
larry
 
   / What attachments did you THINK you needed but don't use much? #93  
   / What attachments did you THINK you needed but don't use much? #94  
Let some air out of the tires on one side? ;)

I guess that would be one way to do it. My guess is that they don't have a need for any custom grading, thus they can get what they need done with their FEL, and that is fine. I know that I would HATE to only have my FEL for grading.
 
   / What attachments did you THINK you needed but don't use much? #97  
I have some questions for you guys that prefer your FEL to a box blade. What type of grading are you doing with your FEL? What do you do when you need one side lower than the other? :confused:

I thought you were supposed to put taller tires on the side you wanted higher :)
 
   / What attachments did you THINK you needed but don't use much? #98  
I thought you were supposed to put taller tires on the side you wanted higher :)
Ok, but then you better only have 1 wheel drive, or you going to have huge drive line binding. :eek:
 
   / What attachments did you THINK you needed but don't use much? #99  
Funny. I was just wondering if they are both the same person.

Eddie

Geeze, give a guy a break. The other person you are comparing me to does this continuously, and I respond to a couple of postings on the same thread, and I get compared to Mr. Gotta-respond-to-every-post-even-if-it-is-a-meaningless-on-word-comment :rolleyes:
 
   / What attachments did you THINK you needed but don't use much? #100  
I've got a 4n1 bucket on the FEL, and still often have the box blade on at the same time. They do different things, and even though its subtle, its still useful.

I actually have a 2 rakes on the m59 now - skidsteer rake in front, 3ph rake behind. They actually do things slightly differently to the point its nice to have both.

As for useless, given that I've never actually used my fertilizer/seed/spreader, I'd have trouble justifying it... I think this might be the year it gets a use. For me, a push scotts spreader would have been fine.
 
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
John Deere 7130 (A50120)
John Deere 7130...
2020 CATERPILLAR 308CR EXCAVATOR (A51242)
2020 CATERPILLAR...
1990 HOMEMADE LOWBOY TRAILER (A51243)
1990 HOMEMADE...
2016 Hurricane Blo-Vac X3 Stand-On Blower (A50324)
2016 Hurricane...
2008 JLG 600S TELESCOPIC MANLIFT (A51242)
2008 JLG 600S...
 
Top

Looks like your ad blocker is on.

×

We rely on ads to keep creating quality content for you to enjoy for free.

Please support our site by disabling your ad blocker.

Continue without supporting us

Choose your Ad Blocker

  • Adblock Plus
  • Adblock
  • Adguard
  • Ad Remover
  • Brave
  • Ghostery
  • uBlock Origin
  • uBlock
  • UltraBlock
  • Other
  1. In the extension bar, click the AdBlock Plus icon
  2. Click the large blue toggle for this website
  3. Click refresh
  1. In the extension bar, click the AdBlock icon
  2. Under "Pause on this site" click "Always"
  1. In the extension bar, click on the Adguard icon
  2. Click on the large green toggle for this website
  1. In the extension bar, click on the Ad Remover icon
  2. Click "Disable on This Website"
  1. In the extension bar, click on the orange lion icon
  2. Click the toggle on the top right, shifting from "Up" to "Down"
  1. In the extension bar, click on the Ghostery icon
  2. Click the "Anti-Tracking" shield so it says "Off"
  3. Click the "Ad-Blocking" stop sign so it says "Off"
  4. Refresh the page
  1. In the extension bar, click on the uBlock Origin icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the uBlock icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the UltraBlock icon
  2. Check the "Disable UltraBlock" checkbox
  1. Please disable your Ad Blocker
  2. Disable any DNS blocking tools such as AdGuardDNS or NextDNS

If the prompt is still appearing, please disable any tools or services you are using that block internet ads (e.g. DNS Servers).