Which Diverter/Selector Valve will work?

   / Which Diverter/Selector Valve will work? #1  

Gomer

Silver Member
Joined
Dec 20, 2006
Messages
126
Location
West Michigan
I an planning to add a thumb on B2630 FEL and would like to add a diverter or selector valve to the FEL control so I can switch between rolling the bucket and pinching the thumb. I found these two valves and I know very little about hydraulics but I think only the one (1782)will work. Advise? comments?
 

Attachments

  • AS9-1782.pdf
    63.5 KB · Views: 346
  • AS9-5117.pdf
    167.1 KB · Views: 233
   / Which Diverter/Selector Valve will work?
  • Thread Starter
#3  
113 views and 1 reply, is there a better way to do this? Am I missing something?
Or is this too technical and I should limit my questions to whether a horn is a safety device or not.:rolleyes:
 
   / Which Diverter/Selector Valve will work? #4  
Gomer said:
113 views and 1 reply, is there a better way to do this? Am I missing something?
Or is this too technical and I should limit my questions to whether a horn is a safety device or not.:rolleyes:

Your first choice looks the best. There, now you have another reply and I have another post.
 
   / Which Diverter/Selector Valve will work?
  • Thread Starter
#5  
Wayne,
Dude:cool:
 
   / Which Diverter/Selector Valve will work? #6  
Gomer said:
113 views and 1 reply, is there a better way to do this? Am I missing something?
Or is this too technical and I should limit my questions to whether a horn is a safety device or not.:rolleyes:

You posted this same question in the hydraulic forum correct?
 
   / Which Diverter/Selector Valve will work? #7  
They look like they both would allow you to use the rolling circuit to control the thumb. The difference is the 1782 uses a momentary push button to switch control while the 5117 uses a single pole, double throw switch. I think I'd like the push button better. "Push the button, move the thumb-let go of the button and roll the bucket". Otherwise you'd have to flip the SPDT switch back and forth.
 
   / Which Diverter/Selector Valve will work? #9  
Gomer said:
113 views and 1 reply, is there a better way to do this? Am I missing something?...

Maybe those 113 are others looking for answers as well. Or, maybe they already answered your other post...:rolleyes:
 
   / Which Diverter/Selector Valve will work?
  • Thread Starter
#10  
Thanks for the feedback, Mike,yea that's what I was thinking too. Yes I posted over there because I wasn't getting anything here, sorry for the confusion.
 

Tractor & Equipment Auctions

PALLET OF SCAFFOLDING (APPROX. 19 PC) (A52706)
PALLET OF...
ATLAS XAS110 COMPRESSOR (A52472)
ATLAS XAS110...
2010 LONE STAR TRAILER MFG. GOOSENECK TRAILER (A53843)
2010 LONE STAR...
2018 Ford Fusion Hybird (A53424)
2018 Ford Fusion...
UNKNOWN 16 T/A TRASH TRAILER (A53843)
UNKNOWN 16 T/A...
UNUSED CFG INDUSTRIAL MX15RX EXCAVATOR (A52706)
UNUSED CFG...
 
Top