XUV Oil Filter

   / XUV Oil Filter #1  

wayupnth

Member
Joined
Jun 10, 2007
Messages
30
Location
Maine
Is there any trick to getting to the oil filter in the XUV Gator? I have a 850D diesel and cannot seem to budge the filter. It is a new Gator so this is factory filter. Is there a wrench of some sort to give you the torque? I tried an oil filter wrench that I had lying around but there just isn't enough room to tighten the wrench and loosen the filter.

Thoughts?

wayupnth
 
   / XUV Oil Filter #2  
Keep trying. Oil filter wrench is what I use on my HPX and believe me it isn't easy to get the thing to bite down but if you do it just perfect it will.
 
   / XUV Oil Filter #3  
Use a 3/8" rachet wrench and a socket type oil filter tool that fits over the bottom of the filter. After you change out the factory filter the others will come off easier.
 
   / XUV Oil Filter #4  
On my 05 HPX I had the same issue at first oil change. I purchased a filter wrench from my dealer. It fits over the end of the filter. It fits my 455 and 4410.

Craig
 

Tractor & Equipment Auctions

2014 JOHN DEERE 672G MOTOR GRADER (A52707)
2014 JOHN DEERE...
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
EZ-GO Utility Cart (A55851)
EZ-GO Utility Cart...
(APPROX 10) UNUSED SDLANCH RATCHET STRAPS (A57192)
(APPROX 10) UNUSED...
2017 Ford F-350 Flatbed Truck (A56858)
2017 Ford F-350...
2014 MultiQuip WhisperWatt 40kW Three-Phase Diesel Generator (A55973)
2014 MultiQuip...
 
Top