YM2000 Alternator testing

   / YM2000 Alternator testing #1  

Mslater

New member
Joined
Nov 19, 2004
Messages
12
Location
Baton Rouge LA
Tractor
YM2000
Ok, I set my meter on ac and test which outputs? Thanks!
 
   / YM2000 Alternator testing #2  
You want DC, put leads across your battery terminals, looking for +14vdc+- at high idle.
 
   / YM2000 Alternator testing
  • Thread Starter
#3  
Thanks I'll check it out again!
 
   / YM2000 Alternator testing
  • Thread Starter
#4  
I checked at the batt running at about 1500 rpm and get 12.3 volts. Now that I know its not charging how to I narrow it down? Whats the procedure to test the alternator seperately? Thanks alot for your help!
 
   / YM2000 Alternator testing #5  
I'm not sure if your bridge rectifier is in the alternator or the regulator; however, you can unplug the regulator from the alternator and meter across the alternator post and look for +20+- volts on AC or DC scale. No voltage says bad alternator, +20+- says bad regulator, AC or DC reading gives the location of the rectifier, which changes voltage from AC to DC. It's usually a bad regulator.
 
   / YM2000 Alternator testing
  • Thread Starter
#6  
Gotcha, I'll give it a shot tomorrow. Thanks again!
 

Tractor & Equipment Auctions

Bush Hog 2720 (A50120)
Bush Hog 2720 (A50120)
JOHN DEERE XUV835M (A53084)
JOHN DEERE XUV835M...
2017 GENIE GS-2646 (A52472)
2017 GENIE GS-2646...
2015 DODGE RAM 1500 CREW CAB TRUCK (A51406)
2015 DODGE RAM...
1980 AM General M35A 2.5 Ton 6x6 Cargo Truck (A50323)
1980 AM General...
2012 Hyundai Genesis Sedan (A51694)
2012 Hyundai...
 
Top