Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
Hello from the previous forum. I posted this (below) before I finished reading the whole list of old messages. So I decided to copy it here. I hope this is OK.
I hope someone found all the photos in the old forum that got ejected into cyberspace. I'd like to see them.
Anyway, I'm glad to be here, and hope that the ZTR project was completed and the owner will discuss it with me. Thanks...
danz
From: "rdanz1" <rdanzey@n...>
Date: Fri Jul 26, 2002 12:11 am
Subject: Re: Homemade lawn mower deck? ALSO: can't find pictures.
BKasler, I'm about halfway through the old messages,
and don't see any
follow-up comments on your posting about your
project that uses a JD
110 for a zero turn mower. I'd be very interested in
details if you
have finished the project.
I can't find any of the photos that have been
mentioned in the early
message postings. I would appreciate directions on
how to find them.
TIA for any help. Regards...
danz
--- In homebuiltequipmentfortractors@y..., BKasler wrote:
> Mike, <br> I didn't make a homemade deck, but I'm
> working on fabbing a 42" heavy duty commercial zero turn
> rider deck to fit my JD 110. This deck is three times
> heavier than the original JD deck and will probably out
> last the tractor. I bought it at a big consignment
> sale for $10 and it's brand new. I already have all
> the attaching hardware welded to the deck, now I just
> have to work on the belts and figure out how their
> going to work. So far it's been way too easy. If
> everything works out it should be done next week. I'll post
> a pic when I'm done.<br><br> Ben
I hope someone found all the photos in the old forum that got ejected into cyberspace. I'd like to see them.
Anyway, I'm glad to be here, and hope that the ZTR project was completed and the owner will discuss it with me. Thanks...
danz
From: "rdanz1" <rdanzey@n...>
Date: Fri Jul 26, 2002 12:11 am
Subject: Re: Homemade lawn mower deck? ALSO: can't find pictures.
BKasler, I'm about halfway through the old messages,
and don't see any
follow-up comments on your posting about your
project that uses a JD
110 for a zero turn mower. I'd be very interested in
details if you
have finished the project.
I can't find any of the photos that have been
mentioned in the early
message postings. I would appreciate directions on
how to find them.
TIA for any help. Regards...
danz
--- In homebuiltequipmentfortractors@y..., BKasler wrote:
> Mike, <br> I didn't make a homemade deck, but I'm
> working on fabbing a 42" heavy duty commercial zero turn
> rider deck to fit my JD 110. This deck is three times
> heavier than the original JD deck and will probably out
> last the tractor. I bought it at a big consignment
> sale for $10 and it's brand new. I already have all
> the attaching hardware welded to the deck, now I just
> have to work on the belts and figure out how their
> going to work. So far it's been way too easy. If
> everything works out it should be done next week. I'll post
> a pic when I'm done.<br><br> Ben
