Search results

My 23 year old heatpump is done. The 23 YO oil fired furnace is OK but I'm am looking at replacing both this spring. The blower in the furnace runs alot with the heatpump and the advantages of a 2 stage blower would be beneficial.The heatpump will not hold freon and with its age I think all the...

Hi, I'm a Kubota forum poster but own a couple Deere mowers. My primary mower is the L100 w/ replaced engine, a briggs with a oil pump. so I guess it's a 110 or something. Anyways it will start if you jump the solenoid so I replaced the solenoid w a dealer replacement one. The new one has the...

Heres a pix from Home Depot's "how to" site. Click to enlarge. This is sort of an option. I could add a rail in the middle or even a 45 degree crossbuck alternating on every section. I'm not too sure about the 2x4 boards being on the flat between the post. They use a 16 foot 1x6 deckboard as a...

Click on pix to enlarge. This will be the main entrance to the rear of the house. The fence will start behind the big bush on the right of the pix. I need a double gate , 8 foot wide in the flat area for deliveries and for the BX to haul in firewood to the french doors behind the pop up tent...

Click on pix to enlarge. Here's the pup and one of the Husky who's the real reason for the fence. I'll post property pix next to get idea what I'm trying to get accomplished.

Ok, We now have 3 dogs, a beagle pup found it's way into our pack two weeks ago. My daughter and I where traveling to a volunteer event early saturday morning when I came around a bend to see a dark object literally crawling weakly across the road. I though it was a small coon that got nipped by...

OK, Used the tractor last week in 40 degree weather. Hauled some firewood and drug the gravel drive a bit with the rake since it was above freezing.No problems starting and ran for about a hour. When I parked the tractor I tried to start back up and curl the bucket down like I normally store it...

Started a new thread because I need some quick answers. I picked up my BX22 from the dealer today. It was in for a hydro unit replacement. Sent her in without the BH and FEL to hopefully save a few buck in labor, I was wrong there see my last thread. Anyways I do the normal thing at the dealer...

Ok, got the voice mail from tha Kubota dealer that my BX22 was fixed. I called them back and asked what the bill would be. The nice lady said $4585. I said "excuse me"??? "Who authorized that ? I was quoted $2700". She says let me get your file. I said fine. I asked if any other parts where...

I have another post about a major failure in my tranny or hydro system on my BX22. I'm at the point due to time and lack of knowledge that I need to get this tractor into a dealer for professional help. I purchased the tractor back in 2004 New at the now defunct Laspina lawn care in North...

I was using BX22 to move some gravel back and forth to fill in a drainage ditch I dug down the lane from my house. I did notice a little whining when using FEL to load gravel. Pretty normal so far. I was moving some dirt out of the way as I was filling the trench and dumped it. Then when trying...

click image to enlarge Have the floor pan off the BX22 to replace the fan, first one in 6 years. Anyways the parking brake locking lever is messed up somehow. The left side of the lever where you engage the brake is OK, spring is in place. The right side seems to be loose in its carrier (right...

After many years and countless hours in the brush and saplings I finally managed to put a stick thru the hydro cooling fan on my BX22. I have a parts list but can't find the right area to get the part number. Any help out there? Thanks in advance and yeah I'll think about the skid plate now.:)

Anyone ever come across a good way to add a sight glass to hydro on the BX series tractor? The hydro dipstick is way to hard to get to and has been a flaw long overdue for remedy. I have a BX22 and blew a hose on the BH yesterday. While on the way to the hose shop, I mentally went thru the list...

Ok it's about time to replace the tires on my BX22. Anyone know a good source for AG tires locally in Western PA or off the net. I'm more concerned with traction than yard damage as I don't mow with the tractor and often get in to muck on my hillside property. I've read the Kubota shop may offer...

I posted this in the Hydro section also. I just purchased a 3PH mounted log splitter, when I hooked it up to my BX22 it loads the rest of the hydro system down. I put in fluid, bled the lines by cycling the loader, 3PH and finally the splitter cylinder. The first time it moved at a moderate...

I just purchased a 3PH mounted log splitter, when I hooked it up to my BX22 it loads the rest of the hydro system down. I put in fluid, bled the lines by cycling the loader, 3PH and finally the splitter cylinder. The first time it moved at a moderate pace. Now it crawls at a snails pace. The FEL...

I'm changing out a few fittings on my BX. One is leaking a bit and the others are to match up with a test guage for checking the hydro pressure. The dealer had no luck getting the correct fittings for the BX22 as the parts numbers had been changed to the new BX24 fittings. I went to a local hose...

Had a scare yesterday evening. I was taking a half dozen cinderblocks down a hill in the loader. About halfway down the BX started rolling faster, then racing, down to the bottom of the slope. Luckily I was going straight down and not across the slope. I was in two wheel drive and in gear. My...

This morning was supposed to go a lot different than it did. I took of work today because I was going to finish up working on the drainage ditch along the driveway. Gravel was to arrive at 9AM. I went out to the bota to hose out the FEL bucket so it would be clean for the gravel. I scraped out...

Hi there all wise kubota owners. I have a problem with my FEL on my BX22. Its 3 years old and seems to have lost a lot of it's loading and digging power. When the tractor was new it would cut thru anything as long as I didn't bury the blade in the ground. Now it bogs down and spins the tires...

didn't want to hijack the floppy bucket post, so here we are with a post of our very own. my bx 22 is coming up on 24 months in service in early august., when the warranty period ends. I have about 350 hrs on it. I have done all the service myself, with receipts from the dealer for parts...

new member here, great forum.... been lurking for some time. while thinking about how nice it would be to get a brush hog for the kubota and looking at the old gravely walk behind. something happened and now i have another project. has anyone ever put one of the old 30 inch brush decks from a...