Hi,. I am looking to purchase a grading scraper and try to decide which size would be most beneficial. Looking at Land Pride GS1260 and GS1272. The 60 is roughly 2200 and the 72 is roughly 2500...

Hi all, I am looking for the part number or where I can get the dealer installed work light for the 1920 rh fender. It is shown in the sales brochure and figured that I would add it to the...

Hi All, I am looking to replace my exhaust from exhaust manifold to tip. My exhaust is missing above the muffler and is very rusty all the way down to the 4 bolt flange. The 1 3/4 outlet is...

Hi All, I just acquired a new to me model year 1990 Ford 1920 4wd tractor with almost 4,800 hours on it. It does start right up and runs great. So I would like a recommendation on engine oil...

Hi, I hope that I am posting in the right section. I do have a 52 8N and am looking to purchase a 92 Ford 1920 4wd. It has about 4,000 hours on it and looks to be in fair to good condition. I...

I have never ow Ed a tractor but ran a few and ever had to deal with repairs or maintenance what is the best hydraulic fluid for my 1980/Ford 1920 series

I bought a used Ford 1920 series tractor .2 days ago I blowed a line left it in the field a d replaced the line but can't fi d the filler cap for the hydraulic system.

Time for a new seat on the 1920. Would appreciate any feedback from other Ford series 20 owners who purchased an aftermarket seat. Thanks.

Weird situation here. I’ve had this happen on a 1984 chevy truck, my sons 1998 Volvo, and now my 1996 Ford 1920 diesel tractor. Battery new. Alternator and stater checked and good. New ignition...

Anyone got advice on how to go about fixing this leak at the engine block fitting? Slow antifreeze leaking from here, several drips after shut down. Will empty reservoir after a couple months...

I need new rear rims on my 1993 Ford 1920, I know you cannot find the original size rims. So the only ones you can find are 12”-24” six loops. I see some bolt center to center dimensions 20” and...

I need new rear rims on my 1993 Ford 1920, I know you cannot find the original size rims. So the only ones you can find are 12”-24” six loops. I see some bolt center to center dimensions 20” and...

Help! I just changed the fuel filter on a 1920 and then after an hour of trying to position the bowl back in found a 1” spring at the bottom of the bucket into which I let the diesel to drain...

Hi to all. I need help again. On my Ford 1920. I was using my box blade for about 2 hours and it started to hop gently and then the position Control lever started to lower itself and feel like it...

Hi guys and girls, I need help pricing my tractor. I’m selling my Lot and won’t need it. It’s a Ford 1920 year 1990 with FEL and ford box blade, forks and finish mower frontier GM1072E and...

Well I got this tractor and it was rough, spent most of its life under a tree in Florida, a lot of rust, I’m doing thing to it on my free time. So I decided to add some lights from researching...

Looking at buying a Ford 1920 a few hours away and the owner told me when he was going over it he noticed a rattle in the rear PTO. He sent me a video which unfortunately I can’t post but it is...

I was poking around the back of my 1990 ford 1920, and removed the hydraulic reservoir cap but didn't see that there was a half a maple seed / helicopter sitting behind the cap. As soon as i...

I made the mistake of purchasing a 1920 with turf tires not realizing how hard it would be to find a set of ag wheels and tires, nevermind at a reasonable price. I am looking to purchase a full...

Well my 1920 has let me down, inside of the fuel tank is very rusty. I've emptied it out several times and got lots of rust out but there seems to be an unlimited amount. There are no new tranks...

Hi to all, does anyone have the Wood Block clutch spacer measurements, so I can make one. I have searched with no luck. My tractor sits for a good while and I don稚 want the clutch to stick in this...

I have a Ford 1920 that I primarily use to bush hog with. The PTO clutch has never worked well and after I purchased a Ditch Bank Flail mower for it the clutch failed causing a stripped upper PTO...

The debris screen just forward of the radiator slides down into slots or grooves on either side of the rad mounting frame. The owners manual smugly says "Clean the radiator front screen" and...

My PTO clutch went out in my 1920. I have done searches for this repair and see varying degrees of success . What is the best, read most reliable, clutch pack to repair my tractor? I have heard...

I have a Ford 1920 and would like to add dual remotes to the rear. I do not have a loader and the tractor is kept 60 miles from my house. Looking at the Service manual it looks like I could add...

My 1989 Ford 1920 hitch leaks down quite soon after engine shutdown. Changing the position of the control knob under front edge of seat makes no difference. What is my best (easiest) course of...

I am in the process of adding rear remotes to my Ford 1920. I am trying to locate, or fabricate if necessary, some sort of bracket to hold the four hoses with quick disconnects in the rear of the...

Sort of a long post, awhile back posted about not starting after shutting off and trying to restart, would not till cooled down. Please hold this thought. Fooling around with it yesterday would...

Hi, I am totally new to tractors. Just got a 1989 Ford Model 1920 Saturday to clean up woods and overgrowth. Didn't know it was dogged/pinned and think that's how I popped a line. Brother...

Hi ! Some years I sold my Shibaura 1540. Ok, but new tractor. This time a Ford 1920. Shibaura production. Starter motor will not crank the engine. It spins inn but no futher action. Have to...

Greetings all. New to the group, and new to tractors.* I just inherited my Dad's mid-90s Ford 1920 SSS. It has been sitting for about the last ten*years, but was moved across the property about a...

I have a ford model 1920 . I had to split the tractor to work on the transmission,while I had it in half I decided to replace the 2 stage clutch and assembly in hopes it makes it until I am to old...

Good morning from Richfield Ohio! Have a Ford 1920 and experiencing trouble shifting from forward to reverse for a while. This week shuttle has locked into reverse and can’t shift out of reverse...

I have subject unit & owned since new & have issues with 4wd. It has 3000 hrs. Great shape and has been an excellent asset. Lots of work done. Last winter it started clicking when reversing in...

The old muffler finally cracked clean through,the inner can as well. I'd already welded it back previously so it was time to replace it. I purchased a Stanley muffler F0-35. Read up, searched here...

Hi I bought a Ford 1920 about 18 months ago and it now won't disengage the PTO clutch, which is clearly a common problem. I have read a bunch of posts about this and we want to try to access the...

I've been reading the recent (and older) threads about 1920's with tire and/or rim problems, but I can't seem to find answers to my questions. One day I went to use the tractor and noticed a big...

I've seen plenty of posts where the clutch will not disengage and cannot shift PTO in without grinding or can not get it out of gear. My problem is like clutch is disengaged. Have no problem...

So a previous owner chewed up the tires on my Ford 1920 pretty bad by not tightening the adjustments on the three point and allowing an implement to swing in to the tires as the arms are very...

Ok I have a 1989 Ford 1920 In the past I have replaced the ignition switch with Ford oem switch and was fine The neutral safety switch was replaced a year or two later worked fine Couple years...

I have a 1989 Ford 1920 that does not have any remotes. I would like to add a two spool valve assy., but cannot seem to make an after market adapter plate work. I bought a nice looking ($96)...

I would like to add a tilt function to my ford 1920 3pt hitch, What cylinder should I use (approx. 16" retracted x 24" extended)? Is there a direct fit available (with proper ends)? What would be...

I picked up a mid 90's Ford 1920 4 x 4 from a person who just needed it out of the yard. When I picked it up it started and ran fine or so I thought. Literally just loaded it on the trailer...

Hello - my husband and I have about 55 acres of hilly pasture in VA that we don't live on full time. Our ideal tractor is out of the budget right now, and the grass is getting tall, so I figured...

good morning folks, I have searched and searched and have a service manual on order, but I currently have both front wheels off my Ford 1920 4WD (replacing tires) and need to know the proper...

ford 1920 3pt. hickups,oscilates up and down. After reading posts on here, It sounds like it maybe the lift piston seals. Does anybody have service manual were they could send me pages of the...

Hi guys, Besides the OEM loader, what other types will fit a Ford 1920? I have seen a few pics online of other loaders, but have no idea which sizes they are and how available they are. Thanks.

I have a manual for 1520/1720 model. Does anybody know if the double clutch repair section for the 1720 would apply for my 1920 model.

I changed the trans/hyd fluid in my Ford 1920 along with new filters, both hydraulic and fuel. Since then the tractor will not operate properly under load. The tractor will not even move in...

Hi We are looking at buying a Ford 1920 off a local machinery dealer here in the UK to do light work on our farm. It has run about 4500 hours, is fitted with a locally made loader and backhoe and...

I would like to remove the steering wheel from my Ford 1920. I DO NOT want to damage the wheel, as I will be reinstalling it. My reason for removal is that it will save me $175 in...

I have a 1988 Ford 1920 that I had refurbished in 2015. It had 1050 hours then, and has 1063 now. I decided to have a new (aftermarket) clutch installed, because I had an idea that the loader had...

Trying to figure out how many hydrauic lines go from the manifold to the the joystick, does it us 2 lines or 3, thanks for the info

I just bought a Ford 1920, it has a Bushhog brand 2400QT loader, the problem I am having is the front loader and the 3 point lift will not work at the same time, the man got it from sez it was...

Anyone know anything about a Du-al 110? I snapped the piston when the Clevis pin snapped at full extension. I can remove the cylinder but am hoping someone had schematics/parts list. Woods is of...

Good afternoon! I have a 1989 Ford 1920, FEL, 17xx hours. The coolant level light and temperature gauge are having issues. Coolant Level Light - stays on (flickering slightly). Temperature Gauge...

Hey everyone, We just picked up our first tractor almost 2 weeks ago from a fella in TN. He included a 5' bush hog that is quite stout. He customized the bush hog and made it with thicker, more...

Hey guys, quick question here. So my dad and I picked up a Ford 1920 and I noticed it seemed like it was leaking something. At first the guy said it was just the lube and grease that he had just...

I need new front wheels for my Ford 1920 4WD. Went to a New Holland dealership and they wanted $346 per bare rim for the standard farm 8-16 version. Does anyone have any better sources...

Hi, I was having some clutch problems on my Ford 1920, so I decided to split the tractor and take a look at it. Lots of good info in these forums. Unfortunately, I can't get it to separate...

I have been lurking a while, and finally joined. Lots of great information on this forum. I have searched to try to get some rough pricing, but have quite a range I feel it could be in. I have...

My '91 Ford 1920 tractor has recently started popping out of forward and reverse when I back off the throttle. It also pops out of 4WD occasionally under load. Anyone know if these are common...

A year ago I bought a 1988 Ford 1920 FEL 4x4 with 1056 hours. This past summer I took it up to Nova Scotia for a thorough refurbishing. We did the work in...

I have a 1988 Ford 1920 that does not have a hydraulic remote, and I would very much like to have one. I understand that there is a "Hydraulic Adapter Plate" available for the Ford 1920. Is...

Hi there -- I was directed to this forum as a place to help me price my tractor. It is a Ford 1920, bought new in 1987, with 4wd, a front end loader, a mower attachment, and 218 hours on it. It...

Have a Ford 1920 Tractor whose PTO will not stay in gear. Started acting up this Fall while blowing leaves with a 3 point blower. Any ideas? What needs to be fixed? Tractor has 5000 hours. Is used...

Last October I bought a 1988 Ford 1920 4x4 FEL with 1067 hours. It had 14.9 x 24 R-1 rear tires, but the rims were shot (calcium chloride). I bought new rims, and new 13.6 x 24 R-1 tires as a...

Yesterday, my stupid boyfriend convinced me to get in my tractor and pull on a series of chains attached pretty high up on a dead tree that was leaning towards the power lines. I wanted to wait...

My dad is reaching an age where he is unable to do some of the things he used to do, but he still tries anyway. He mows about 10 acres, so in the fall, he has a lot of cleanup with black walnuts...

Hello. New Member here, searching for advice. I have a 1987 Ford 2810 with New Idea FEL that I purchased used about 15 years ago. It currently has 2700 plus hours. I have 25 acres mostly flat...

I have a 1994 Ford 1920 FWD SSS, which suddenly stopped going into gear. By suddenly I mean it worked one evening but not the next. It has 2200 hours. I did a forum search and did not find...

I have hyd. fluid coming from the cylinder that facilitates the power steering. I'm assuming it can be rebuilt. I'm also assuming this job requires tools and skill that I do not possess. Does...

After owning my 1920 for a few years, I have run into a lot of cases where a set of forks would be very handy. Moving large rocks, unloading heavy "finds" out of the back of the truck (a boiler...

I have a crack in the rubber hose going from the bulkhead metal hose to the piston. How do I get the rubber hoses out? Not much room for a wrench. Drop the axle? Pull the piston?

Hello everyone, I have decided to sell my ford 1920 tractor. I am quite fond of this teactor but I have a need for more loader capacity and would like both hydraulic remotes and a Third function...

Hello everyone! My 1993 Ford 1920 SSS 4WD needs an engine rebuild. Mice ate through the oil pressure sensor wire and I wasn't alerted the engine was low on oil. While snowblowing earlier this...

need spec's for adjusting the pto clutch before I put tractor back together. The shop manual I have shows a different clutch setup than I have. The manual I have the 3 adjustment bolts go through...

I have a Ford 1920 4x4 diesel tractor. I believe it is a 1996 but I'm not certain. My clutch has seized up after sitting for some time. I plan on splitting the tractor to hopefully rebuild the...

I have a rear axle seal leaking and wondered what the difficulty is in removing the axle.

Well I bought this tractor last spring and lets just say Calcium has taken its toll on my rear rims. I plan on replacing rims and rear tires next year most likely but I cant seem to find 13x24...

Does anyone know if there is a blow up diagram of the power steering cylinder available ? mine is leaking and needs to be rebuilt

Does anybody know where I can get a clutch alignment tool part # 00078 and gauge tool #1267 to buy or to rent?

When the hydraulic fluid is cold, the 3 point hitch will lift scraper blade. When the tractor is warmed up, the scraper will not lift. There is no external hydraulic filter. Is there an internal...

Hey all, I have a Ford 1900. There is a wire on the back of the Alternator that is hanging, dont know how it came off. I dont know where it goes? I am schematic illiterate. Can some one [...

Does anyone out there have a service manual PDF for a 1920 and would you be willing to send me a copy? I know I can buy one but I'd rather not because I'm cheap! Thanks

Hello I have a ford 1920. Today after having graded a neighbors driveway I was headed back home on pavement in 2wd. I drove over a bridge expansion joint which jolted the tractor significantly...

Hello All, New here to the forum. I have had one tractor most of my life a 1988 Ford 1920 4wd with bush hog loader that I used at 12 years old to mow a 10 acre piece of land and i am now 30. I...

Looking at a 1989 Ford 1920 with 1768 hours, includes push blade and 72 inch bush hog. The tractor is in great shape, clean diesel engine (said it was 38 hp?) hyrdraulics work great, original...

I am looking to buy a used tractor needed for rotorilling and field mowing. I have identified a 1975 Ford 4410 (63hp) and a 1990 Ford 1920 (32hp), they are both are priced around 7k. Does...

Brand new 1920 owner. The feedback mechanism for the 3 point positioning seems to be frozen. When I bought it the little L bracket connecting the feedback rod to the control shaft was snapped. I...

I have a ford 1920 sss 4wd that i bought to use as parts for a 1920 repair project that i did. I have taken all of the parts off that i need and am wondering if anyone needs any parts before start...

My mechanic needs a clutch alignment tool for may dual clutch. Does anyone have a source?

A while back I saw this 1920 listed for sale on a dealer site, didn't have a loader which is something I wanted but I called anyway and asked them if there's any way they could find a loader for...

I have a 1988 Ford 1920. The 4WD went out. Upon troubleshooting I discovered that a piece of pot metal on the the shifter mechanism broke off inside the tranny. The repair looks easy however I...

I posted this in the Ford NH forum but thought I might get more answers here: Hello I have a ford 1920 with 1150 hrs on it. I noticed some strange behavior with the 3pt lift today as I was moving...

Hello I have a ford 1920 with 1150 hrs on it. I noticed some strange behavior with the 3pt lift today as I was moving things around the yard in preparation for the coming snow storm. The...

Is there any way to test the switch I replaced it 4 or 5 years ago and now it seems to be bad again I used the tractor yesterday parked it and today no go! A couple of months ago I recall having...

All, I am thinking about converting my loader over to SSQA so I can get a set of forks, and it won't take me a lot of time to switch from bucket to forks. I priced the adapter from my dealer...

Traced problem to what I think is very small relay on firewall. Relay does not operate when switch is turned to start position. I disconnected relay and added a jumper in socket where (make)...

Hi guys, this is my first post but I've been lurking for a while. I'm in the process of replacing the clutch on my Ford 1920. I found some great advice from MikeWard and thegoul in a couple of...

Long time reader, but first time for a question on here... Hopefully you all can help me out. So here is the background. I'm dealing with a '94 Ford 1920 SSS. The clutch is going out I know (PO...

I have a real nice 1987 Ford 192o diesel. Lately it has been seizing up after running a short time under heavy load. My guess was that it was over-heating, so I replace water pump -- and it is...

Hello again, I am going to look at a ford 1920 on Sunday. It is listed at 11,500 OBO with a loader, and has 1200 hours. The owner claims it is extra nice with good tires, so I am hoping it is...

What is the correct temperature for the thermostat for my 1991 year ford model 1920? Thanks Fred

Having electrical problem with Ford 1920.....see www.tractorbynet.com/forums/parts-repairs/264468-ford-1920-electrical-trouble.html I checked for more mice chewed wires....couldn't find any...

Anyone know what the function of the printed circuit board on a ford 1920? Would it prevent the tractor from starting? I tested the key switch and neutral safety switch and they checkout ok.

The tractor was running great until some mice decided to make a nest on top of the fuel tank and chew some wires (I hope they're constipated). I bought a new circuit board and wiring harness for...

Howdy! What a great place TBN is! I have been reading some of the posts and they are great. I have learned much! I need a new tractor for the farm, we rasie dairy goats and getting Dexters in...

I have a 1990 Ford model 1920 tractor and my Hydraulics just stopped working. I checked and added hydraulic fluid but it didn't help. Before I call for service, is there a couple of simple...

Have a Ford 1920 that I am putting back together after several years of sitting idle. I have it up and running and am working out some hydraulic problems, however, I have one problem which I am...

The clutch on my 96 Ford 1920 is stuck big time, been a couple weeks since I used it, I have read some of the old threads and tried driving it in figue 8's, I tried bumping it into a tree in low...

New to me Ford 1920 lift problems, when the lift is at any position it oscilates, it will go up to that point and drop back, go back up and drop back, about a quarter of the the way, doesn't...

Just bought a Ford 1920 and need to change all the filters, does anyone have cross reference numbers, I checked the outer air filter and it had so much dirt in it its a wonder the machine was...

Anyone have an owners manual they could scan and send me for a 1989 ford 1920? I'd sure appreciate it.

Anyone have a diagram of the assembly of a ford 1920 injector pump? I seem to be getting diesel out of one of the ports on the pump but nothing out of the other 3.

Looking at buying a Ford 1920, it is blowing black smoke out of the exhaust and the valve cover tube, the owner said it started all at once and also experienced a loss in power, he has it priced...

I was brush cutting today with a Ford 1920 and I noticed that the 3PH arms were getting jumpy and slow when I was raising them. I checked the fluid level and added a gallon of hydraulic fluid but...

I sold a tractor that had pressure coming out around number three injection at the head. Sounded like a exhaust leak. The buyer purchased anyway. What would that be? Thanks

I picked up a Ford model 1920 2WD w/o a loader. It is in pretty bad shape so I am going to spend some time fixing it up. One problem is all the turnbuckles are rusted and I broke one trying to...

Can this tractor handle a sickle mower? If yes anybody used on this tractor before? what size of sickle? Thanks

Ok folks, found a package Im trying to find out what you think is all worth, a 1 owner 1920 4x4 with loader, very well maintained, almost new tires, with a landpride finish mower, rhino se6 hog...

Ok folks, found a package Im trying to find out what you think is all worth, a 1 owner 1920 4x4 with loader, very well maintained, almost new tires, with a landpride finish mower, rhino se6 hog...

Hello all. I'm new to the group and am looking for some advise on what to do with my 1920. It has the factory loader and 758b sub frame backhoe with 1682 hours on it. I bought it about 3 years...

try to locate a place to get a used drive shaft for my tractor. either near springfield mo or online or? also looking for the rear lift bars that connect to the attachments. any help appreciated

Can I change the control valve on the loader to a cheaper brand, such as Prince? NH wants $1200 and a double spool Prince, single lever, is around $300. Also, is the control valve open or closed...

I hope some of the 1920 experts in this group will be able to provide some assistance. Over the last two years I have noticed that my coolant level goes down slightly and I have had to add small...

I just picked up a 1920 at a state auction. It has 2 issues, first, it will not start when the key is turned, but with the key on, I can jump the solenoid coil to the positive battery cable and it...

I have a neighbor that is a widow and she takes care of a small campground by herself. I try and help her out as much as I can. She has a 1920 Ford and needs the fluids changed. The Engine oil...

Hello all and thank you for your help ahead of time. Hubby got hold of this he believes is a 1995 Ford 1920. Can someone tell me what the fuses go to (so I can "act like I know" what I am...

Hello all and thank you for your help ahead of time. Hubby got hold of this he believes is a 1995 Ford 1920. Can someone tell me what the fuses go to (so I can "act like I know" what I am...

Switching a Ford backhoe between our 2120 and 1920 - the 2120 was "plumbed" for the backhoe from the dealer and avoided using the rear remotes....can anyone help with "plumbing" in the male...

Hi Folks, I have a Ford 1920. The Clutch PEDAL will not move. I know how to free a stuck pressure plate to disk, but this is not the case. The pedal itself will not travel. I am guessing the...

OK...I had way too much hydro fluid in my Ford 1920. It was that way when I bought it. It also had water in the hydro system so I decided to drain the system, change out the filter and refill to...

I am looking at buying another New Holland tractor. I was curious about the NH 1920. I have read rave reviews about them on this forum and I have owned the little brother to this tractor (1520)...

I am (maybe!) fixing this unit for a church. It moves but just barely (engine is OK) and the bucket moves bt has no "oomph" (e.g. it wont lift the front end off the ground). The hydraulic fluid...

going to buy a 1920 with only 344 hours 7108 loader, 6 foot gill scrape and a 16 foot tandem axle trailer for $11,000. Taken to dealer for clutch repair, clean, no leeks, looks like a steal do any...

I am going to buy a Ford 1920 with 7108 loader it comes with a 16 foot tandem axle trailer rated at 7 tons and gill 6 foot scape blade, only 344 hours, a few dents in sheet metal, runs clean, no...

Recent owner of used model here.. The bucket was gone to **** when I bought it and I finally took back enough empty cans and bottles for the deposit to get another bucket setup. My aim is to get...

The power steering cylinder was leaking on my 1920. I replaced theo rings and stopped the leak but now it feels like there is an air pocket in there. It doesn't turn very well and actually feels...

Hello all, I've been lurking here for about a year, and thought I finally join with a problem. :) I have a '92 1920 with 1650 hrs , a backhoe and a loader. I have the infamous "PTO hates you and...

Hi all, new to the forum and it is a great one. I have a chance to buy a 1920 4WD with loader, year approx 1990. It's been worked but is in decent shape and everything works. He is asking...

I have a Ford 1920 model 2wd with 2300 hours. Last week while running a rototiller I stopped for a minute to get a drink and when I went to engage the PTO, all it would do was grind. I checked...

Having never dealt with any Ford tractors, I have graduated up to a 1920. It has a loader with the typical joystick control, presumably open center. There is one male hydraulic outlet on the...

-------------------------------------------------------------------------------- Would you buy this if you were me? 1992 Ford 1920 4x4, with 7108 loader, 758B backhoe. A tree fell and landed just...

Attached pics. Assuming it is in good condition, any opinions as to whether this is a good little blower for a 3/4 mile lane? I live in Prince Edward Island where we can get 118 inches of snow...

1992 Ford 1920 4x4, with 7108 loader, 758B backhoe. A tree fell and landed just in front of the steering wheel taking out the gauges and breaking bell housing/block. Was in good working...

Looking for salvage Ford 1920 tractor with a bad engine. Need for a project.

I recently broke my ankle, so the tractor sat for 3 months. Went to start it and clutch was stuck, could force it in and out of first and second gear. Usually ( in the past ), when this happened...

I recently broke my ankle, so the tractor sat for 3 months. Went to start it and clutch was stuck, could force it in and out of first and second gear. Usually ( in the past ), when this happened...

I'm looking at a 1987 Ford 1920 with 1300 hours. Has FEL (7108) and subframe mounted backhoe. Turf tires, front wheel assist, 12x4. With 6' flail mower in good condition and brushrake and...

I got on the tractor today and started it and let it warm up for a few minutes, pushed the clutch in and started to put in gear and heard the gears grind:mad: I can't get the clutch to release the...

I have been doing the routine maintenance and some repairs on my 1994 1920 since I bought it new. I have decided to check and adjust the valve clearance myself this time around. I have followed...

Hello all looking for some advice on purchasing a ford 1920 4X4 sss tranny yr. 1987 with 900 hrs. with loader. I know the guy and I know it was well ( not great)taken care of. I dont think fluids...

I'm wodering if 10K is a good price for a ford 1920 4x4, with loader and back hoe. it has 4600 hours on it and is a 1 owner. not sure of the year but its around 1990. i"m told it is dry, no leaks...

First post.... great site!!! 1920 with 4300 hrs, ford loader, 12-4 gear tranny, clutch professionally done last year, tires, brakes, and tin all in good shape. My question is..... any major...

This is my first post on this forum. I have a 1989 Ford 1920 tractor.2,000 hrs I致e only had it for a short time and have used it for about 6-10 hours. I致e been moving sand with the loader and...

Hi, I have a chance to buy a Ford 1920 with a front end loader and backhoe attachment. It has 3961 hours on it and they are asking for $8k. I checked the serial number for the tractor and it was...

Please help me with your advice.....I have found two very clean used Ford/NH tractors at separate dealers and would like help in deciding between them....any advice on which is better would be...

buynh-ML-873910-ML- NH specific thread.

The clutch on my Ford 1920 (1998 year of build) has decided to give up the ghost. Does anyone know if there is an aftermarket dual clutch kit for this tractor or am I limited to New Holland parts...

The clutch on my Ford 1920 (1998 year of build) has decided to give up the ghost. Does anyone know if there is an aftermarket dual clutch kit for this tractor or am I limited to New Holland parts...

I have seen a very nice one-owner recent trade 1997 JD 1920, 4WD, shuttle shift, with FEL/bucket with 900 hours at a dealer...asking price $13,900 for about $2K more, I could buy a brand new...

Looking for sheet metal for a Ford 1920. If anyone has run across some please contact me. Thanks.

I'm going to look at an '85 Ford 1920 with FEL and a backhoe. The rig has about 1500 hours on it and the dealer is asking $11,500. The tractor is 4WD and has a shuttle shift. Your thoughts on...

I have very little time to consider this purchase, so I'm trying to get as much info as possible on a well used 1920 at a local dealership. It looks very worn, pobably 15 yrs old, but everything...

Hi all. I am a newbie here and have a question. I inherited my late husband's Ford 1920 tractor and have learned to operate, and love doing so as well. My question is this... I have been trying...

I needs ROPS for my tractor. The only source I've been able to find is the local NH dealer for over 700 bucks. Can anyone recommend an aftermarket or other place to find a roll-bar for a 1997 Ford...

I just sold my Ford 1920 4 wheel drive tractor and loader. I absolutely loved it, but I want to move up at least one size and up in HP. I have been looking at the NH TC48DA 4 wheel drive with...

I've been suddenly and inadvertently launched into a new career as a "real estate developer". I have 25 acres of partially wooded, partial former field which hasn't been bushhogged in 7 or 8...

Just bought 6 sloping, wooded acres and need a tractor. . .looking at a '90 Ford 1920 4k hrs w/FEL for $10k or a '98 MF 1225 400 hrs w/FEL for $11.5k What's the better bet? Thanks & regards

Does anyone have any suggestions on where I can get a new starter for my 1989 Ford 1920? The quote from the dealer was close to $500.00 new and the rebuilt I put in only lasted a year and a half.

In (very) general terms, what would you think the following would be worth: Ford 1920 MFWD ( I don't know the year) 680 hours Clean, Clean, Clean! Good Tires Ford Loader I was looking in US...

This beauty has 248 hrs, 4cyl,diesel,sss model,live remote,loader,backhoe with 12 & 18 inch buckets,posthole digger with 3 blades,Woods yard box,Woods 5 ft.bush hog,Woods rototiller. All equip is...