I have been wanting to build a full cage ROPS since I got my tractor about 2.5 years ago. My farm is 100% hillside, and I push my tractor to the limits regularly. I've added wheel spacers to add a...

After 3 years of use, the exhaust on my 3005 has turned the back of the loader bucket black. A minor issue, but I see no reason to send it out the lower corner, Im sure it contributes to the chaff...

Guys, Has anyone attempted to re-route the underneath forward discharge of exhaust to the rear of on their JD. I have a new JD 3005 and find the low forward discharge of exhaust up front comes...

Just a few pics of my 3005.

One thing I noticed while looking at the Deere site and I haven't seen much mention of the tractor on the site but the 3005 seems much cheaper than say a 2320 even and much much cheaper than the...

I have a JD 3005 tractor with 300 loader. The loader control valve is factory installed, plumbed in with banjo fittings on all 6 lines attached to it. I need to remove the valve assembly to...

Hello all. My name is Chris and ive lurked here for quite a while. The excellent debates and scads of information here helped me to decide on my new John Deere 3005 tractor. Well, a 790 in sheeps...

I flipped my JD3005 & it rested upside-down for about 24 hours. I got it back on its wheels this morning but it won't start. When I turn the key I get a single clunk sound. Any thoughts on what...

Does anybody know why my 3005 keeps dying while I'm operating. Seems like it doesn't start dying until I have been using awhile and it gets warmed up real good. I simply turn key off, put in...

Hello Folks Was hoping to get some feedback on what I bought. I did quite a bit of research? Spent about a month considering used tractors but finally settled on the 3005, I don`t get it for 3-5...

I am very interested in the JD3005, and would like any owners opinions and or advise about this tractor, pics are welcome too. thanks

Does anyone on here have a wiring diagram for a J.D. 3005? I have a 2007 790 and I believe the wiring is exactly the same. All of the wiring diagrams I get for the 790 are for the older models...

Does anybody know where I can get a 300 loader for a JD 3005

Does anyone have any knowledge and experience with a JD 3005 tractor? I'm trying to get as much information as I can to learn as much as I can.

I posted a week or so ago asking about used tractors. I have decided that with the 0% financing I could afford a new one. Both of these tractors are gear drive and both have about the same HP...

Long time reader, first time poster. I'm the proud new owner of a JD 3005 4x4 Tractor with front end loader. I also bought a Frontier box scrapper (BB2060) and Rotary Cutter (RC2060). After...

Hello ladies and gents. Like the title says I have managed to crack the trans case on my 3005. It cracked on the right side where the large bolt goes in that holds the bracket that the drawbar...

Anyone know of an aftermarket replacement for the stabilizer chains on a 3005/790 tractor? I love my tractor, but the design of these chains is a bad one IMO. I'm around several other tractors...

Someone asked me in a thread a while back what a "pig pole" was for. Well, thats what ive always heard a boom pole referred to as, so thats probably where the confusion came in. I had my wife...

My Deere 3005 3 pt hitch bounces every few minutes when I have it raised with the box blade on it. Its a Woods 5' box blade. The tractor only has 120 hours on it. Can it be that the box blade is...

Is $14,800 a reasonable price for a new JD 3005 with FEL? I've looked at several small tractors and this seems the most reasonable for my area. We don't have many dealers for any tractors. I...

I found this site about 3005 stalling. All info was dated back in 2012, etc. But I'm here to say it hasn't gone away. I have been having that very problem. Yesterday I mowed across my field and...

Hey all, new around here. I have done everything I know how to do so far and have now turned to the interwebs for help. I have a JD 3005 compact utility tractor that won't start and I don't want...

I am impressed with the ability of my compact but the box blade my dealer said i absolutely had to have seems to be a bit heavy do they have smaller one

I have a new John Deere 3005 2WD that came with ribbed 5.00-15 front tires and R1 ag rear tires. I will primarily use this for mowing and would like to move to turf tires. Can anyone help me...

Ok call me stupid but how do you open the hood on a JD 3005 with FEL? I know about the front pin in the side grill and I can pull it out. I can also pull the front grill out slightly toward the...

looked at a3005 2wd the other day ,dealer quoted $9500 ,was wondering if this seems like a good price on this unit??

My dad's jd 3005 has a control valve and and handle for a fel and also has hard lines ran up to about mid-way of the tractor.However, he does not have a loader and was wanting to use those...

Anyone know anything about it? It shows up on the build/price but not on the website. Looking at a no frills tractor with a backhoe and this is the only one in the HP range to accept one. 3203...

How does one remove the hood, for painting, on a John Deere 3005? All help appreciated.

Dang as soon as I try to put it in gear it cuts off. Then I must shift the thing in and out of gear then it will restart. So I got to playing around with the shift handle and just wiggling it left...

Anyone have procedure for brake adjustment on a JD 3005?