I have a Century 3045 and the shuttle is not engaging correctly. It’s hard to get it to go in forward or reverse at times. When it doesn’t slip in you can hear it grinding. Is there an adjustment...

Looking for parts

looking for an engine parts manual for a century 3045

Trying to obtain a manual for a Century 3045. Any help greatly appreciated.

anyone have a PDF of a parts manual with an exploded view? i'm looking for a center console part. specifically a spring attached to the transmission lever and how it fits. Branson has no manuals...

Hi folks, wondering if anyone else has aligned their century or branson tractor? Book says I need 52.5 inches center to center but tractor is binding up when I turn. I adjusted one side out 2...

Hi, I have a 2003 Century 3045 with a Century 50HL Loader. How do I get a replacement bucket that will fit its quick release system? Thank you, Rich

Hi, I have a 2003 Century 3045 with a Century 50HL Loader. How do I get a replacement bucket that will fit its quick release system? Thank you, Rich

Hi all, my front wheel drive isn't working on a century 3045 I just bought from an estate. I knew the old gent who owned this tractor and can verify it isn't beat at all. It spent 99% of it's life...

I just bought this tractor and need help figuring out what is going on with my locking diff. When i push the pedal with my heel it stays down and doesnt seem to lock in. My understandingbis that...

Does anyone have a downloadable manual for a Century 3045 they could email me ? Need it badly. Thanks Drummerboy1953

Hello. First post. Can somebody post a pic of how the grill/mask/headlight assembly attaches to the tractor? I think I'm missing some parts or clips or something. Thanks! Ryan

Does anyone have suggestions on the tractor splitting process for the 3045? This one is a bit different than the older domestic tractors we have had around here before. I am aware that I will be...

Howdy All This is my first post. I have a used 2002 Century 3045 with the c-system 50 loader. I use it with a brush hog on occasion. Have only been using the tractor for a few months...

Thanks in advance... I'm going to need a block heater for the Century 3045 Yanmar 4TNE88-ERKB (Branson 4520) I just got. Any idea where the block heater should go? I haven't looked to see if...

I just bought a used Century 3045. I've noticed that when in the "off" position, the rear PTO still is rotating. The owner before me said he thought that was normal and that if it was connected to...

The century 3045 quit moving when I was using it to move some dirt and debri up a hill. Then i was able to back up very slowly and then forward about 30 feet and it quit moving all together I...

I was moving a small load of dirt and debris when the tractor quit moving I was able to back up very slowly and turn it around then it quit again and won't move at all The clutch pedal seemed...

Hello. I am new to the site and just purchased a century 3045 tractor. The guy I bought it from lost the owners manual. Any suggestions? Thank you.

Looking for front end tie rods. Apparently there was a defect when they made these I'm told so now my tractor is dead in the water until I can find some. Anyone know a good source for parts...

My tie rod snapped, told it was a poor design and this has been happening quite a bit. I'm in need of the front tie rods. Anyone know where I can get them? Thanks.

Does anyone have a copy of the PDF manuals for the 3045? I see from old posts, they used to be freely available on century's website, but all the links are bad now.

Hello - I just picked up a 3045 today. Anyone know what type of hydraulic fluid I should use? I assume the fill for that is the one on the back with the sight gauge by the pto. What is the small...

Anyone know where I can find a "stop solenoid relay" for my 2001 Century 3045 tractor? I have been looking on the internet with no luck. What other brand of tractor should I look for that might...

I have looked everywhere and can't find a part number to cross reference an Oil filter for my Tractor. I was told by a Branson Dealer that the Baldwin Part number is B227 but I want to be sure...

Is there a safety switch on the three point hitch? My front bucket works great but the 3 point doesn't raise and lower any more. I'm still waiting on delivery of my service manual which should...

Hello I am looking for a source for a Shop manuel for a Century 3045 It could be paper or CD/DVD

I am considering selling my 3045 to upgrade to a larger utility tractor. Any ideas on what a fair value to ask for it is? It is a 2003 Century 3045 with the C50 loader and just shy of 300 hours...

I have a century 3045 with around 90 hours on it. I bought it new 2 1/2 years ago. Last week I heard a popping noise comming from the front of the tractor. My initial thought was bolts were...

Started digging the basement today and I was moving some round bales and thought this was a pretty neat picture. There has been some discussion on some of the boards about moving round bales with...

After mostly lurking on this site and studying the capabilities of the Century vs others (JD, MF, NH, Kubota and others) I finally made my decision and purchased a NEW Century 3045 with a 50HL...

I am considering buying a 3045 Century with a model 50HL Front End Loader. The dealer asking price is $18,950. I have not tried to negotiate yet but I am wondering if this is a good price. The...

My new Century was seriously wounded this past Saturday. I spent a few hours digging out a hillside slip with my backhoe and was finishing up scooping away the final pile of mud with the loader...

After reading as much as I could about tractors for a long, long, long time, looking at the blue, orange and green tractors, recovering from sticker shock, then looking at Kioti and Century and...

anyone gotten loan from agricredit.my credit isnt the best right now.plus got hurt on job collcting comp plus ssdi.wondering if anybody knows if they would give me credit.found a great deal on...

The time has come. We have a new C/B forum, this is my 200th post and I have finally got three digits showing on my Century's hour meter (10.0) . What a journey it has been to get here I...

Hello everyone! I am still trying to decide on a first tractor for myself. I've been looking, reading, etc. for awhile. One of the first tractors I drove was the above. I liked it and of...

I've been tring to write a review on my new Century 3045 for the last few days but it won't go thru so thought I would put it here: Century 3045, c-50 fel, dual remotes, r4 loaded, Yanmar...

century-ML-262738-ML-

century-ML-236396-ML-

First of all, let me say Thank You to everyone that has been supplying all the information and opinions on the tractors available out there. I am trying to decide between 3 tractors right now...