I have a CT 335 with a 8TB back hoe. The backhoe just sits in my shop taking up room and has little use because I have a excavator. am going to put it for sale. The question I have is if you...

As the title says, I have the CT335 (2010) which should be the DK35....long story short, need to split the tractor to get the oil pan removed (unless someone knows how to do that without...

How to remove/replace

my ct335 shut down just like i turned the key off, i have no dash lights except the glow plug light when key is turned to preheat. I get a click from the ignition switch relay and the glow plug...

When the outside temp is above 50+ degrees, tractor starts fine. below that temp, it just spins no ignition. already changed glowplug relay. any suggestions?

Just a Kioti in another color so figure I'd try here in addition to the Bobcat forum: Time for a new game of stump the chump....me being the chump. First off, I've scanned quite a few threads...

Time for a new game of stump the chump....me being the chump. First off, I've scanned quite a few threads around same topic, and none of those have helped to fix the issue. Summary: yesterday...

Anyone have the instructions for installing the Bob Cat backhoe? There must be a easier way than what I am doing. If you have one what is your method? Seems like I seen a clip on u tube once...

I posted this in the Bobcat forum, but that's getting little traffic, hope hear gets a few more eyes, as I don't think it's Bobcat specific issue: OK folks...think the problem just got more...

I have a CT335 with cab. On the rear cab at the top of the vertical supports there are two brackets. One on each side. What is the purpose of them. I also have the 8TB backhoe and on the seat...

As is said, the hose broke, part # is 7188081, Bobcat online parts catalog says item not available. Is there a replacement part or new part #? I tried looking at Kioti but couldn't figure out...

This thread caught my attention. Here is my story and "sticking to it". I just purchased a Botcat ct335 with a factory Bobcat backhoe. I purchased it from a dealer on Ebay. (not complaning or...

I Just purchased a CT335. 2012. It has some grill damage which I patched up and fixed most of it but I need the lower screen. Some one had cut a hole through the screen to hook up a battery...

I just purchased a Bobcat ct335. Has a few things wrong with it that I am trying to address. One is that the grill is damaged. I glued the plastic shroud back together with JB plastic weld and...

Have a ct335. I understand that there are 4 relays under the dash. How do you go about removing dash to get to them. From a little info. I have it says picture 290. I don't have a manual. My...

Any one own a Bobcat CT335 with a cab and backhoe. Hoe do you like it. What do you think it is worth? I am looking around for a medium size backhoe but I want one with a cab and heat and AC...

My 10-year old CT335 with 560 hours on it has developed a weird problem. I am losing power when engaging PTO-driven implements. History: ran out of fuel. Replaced fuel filter and had to bleed the...

Know the price and availability of parts before you buy. Example: cracked and broken clear plastic cover on instrument panel. OEM = $550 It is part of an "assembly" which includes the entire...

Hello and hopefully someone can give some advice to get this thing running again. A few weeks ago the tractor started showing signs of something wrong. It turned over but would not start but the...

Hello - I'm new to the forum and hoping someone here can help. I just picked up a Bobcat CT335 without a FEL. Im finding that new units will run me close to what I paid for the entire machine. I...

I noticed that when I use the 4 wheel assist and turn the steering wheel sharp to the left or right the tractor bogs down and lunges forward is this normal, also having some electrical...

I had a ripped o-ring and replaced it with a new one. It still leaks some so I must have the wrong size. I need some help finding a part number and dimensions for the correct o-ring. Thanks, Ray

Since my last fill up, the fuel gauge is at full, despite having about 12 hours of heavy use. The gauge was working fine before the fill up. My problem is getting access to the sensor connector...

I changed the battery on my bobcat 335 and had to replace the battery ends due to corrosion a few months back, now the 4 wheel assist light stays on, lose RPM's when the parking brake is applied...

Folks, I was shoveling snow with my bucket and dropped a big chunk of ice on my hood and mashed it. I'm looking for a new hood and don't know if I can find a Bobcat hood. What else might Fit...

I know this is a Kioti forum but my Bobcat is just a white Kioti. Hopefully you can help. I have no power at all. Nothing works. No lights, etc. Battery is good & connected. No click when key is...

No power at all. Nothing works. No lights, etc. Battery is good & connected. No click when key is turned. All fuses are good. Bad switch relay? How do I check the relays? What else might it be...

$155 sounds a bit steep for this filter. Has anyone had any luck finding a cheaper, compatible part number? thanks, D

I have a Bobcat CT335 HST with about 175 hours on it, and I noticed that there is a small oil leak from the right rear brake cam shaft. The service manual shows two o-rings sealing the shaft...

Hello all, I'm in the market for a 30-40HP tractor and stumbled upon a 2013 Bobcat CT335 with FEL, 63hrs on it, and a heated/cooled cab. I called the dealer it was bought from and the vouch for...

Getting ready for winter repairs. Here is one that has lasted all year: Headlights (low or high), turn signals, horn, cruise control, and instrument panel lights to not work. Fuses are all okay...

The wheel bolts and nuts on my CT335 have a bad habit of working loose despite my visual diligence. I lost one wheel bolt only to find my local dealer (60 miles away) want $22 for a single bolt...

Local (60 miles away) Dealer wants $22 for a single wheel bolt for the rear wheel on a Bob cat CT335 compact tractor. I am attempting to find another source. Dealer will not tell me the part...

Hello, everyone. New member here. My dog ripped the owners manual of my CT335 (same as Kioti DK35SE) last week (thank god not the service manual). Does anyone have a PDF version for their Kioti...

Hello, everyone. New member here. My dog ripped the owners manual of my CT335 last week (thank god not the service manual). Does anyone have a PDF version that could send to me? Thank you in...

I'm getting ready to perform the 100 Hr. service on my CT335. One task is to clean out the Spark Arrestor Muffler. My concern is that the clean out plug is right over the alternator, and to...

Up to now, I have used a regular open-end adjustable wrench for maintenance work on my CT335, but would like to get a set of the most needed metric 6pt sockets, especially for the larger hardware...

I just ran across a backhoe (bobcat 911) that was used on a 853 skidsteer, and was wondering if I could hook it up to my Bobcatct335 and be able to use it to dig up some stumps?

I have a CT335 that I'm actually quite happy with. However this winter we've had an extraordinary amount of snow and I'm finding the CT335 is having a hard time pushing it and lifting it to the...

Has anyone purchased a Utility Tractor service manual from Bobcat?? If so, did it come enclosed in a three ring binder? I just received a CT335 service manual from Bobcat but no binder, just the...

Hello again! Life is full of surprises. I purchased my CT335 just a year ago, and though I didn't order this option, I just discovered that it has a mid-mount pto. See attached photos. The only...

While preparing to do a complete grease job on my CT335 (Bobcat performed the first one during the 50 hour service), I noticed that the steering components were different than that shown in my...

Last year I picked up a 1x16 plow off CL for $100 with the intent of trying my CT335 HST with a plow. The plow was made by the Independent Manufacturing Company of Noedesha, Kansas. It is spring...

I changed the hydraulic oil and filter, now the 3-point hitch will raise normally but take 5 minutes to lower. Fluid levels are perfect. Can anyone tell me where to look next? Thank you in advance...

Option A: Used, under 100 hour, Bobcat CT335 tractor only. Great shape. Final price $13,500 NO LOADER!! I would use for 5 acre brush hog and maybe some finish mowing. Option B: New, Bobcat...

Greetings, Hoping someone can help or provide a contact number at Bobcat. I am designing a shed floor for storage of my CT335. Floor will be wood framing. I have factory front end loader and...

A piece of a limb flipped up and broke off a Hydraulic quick connect fitting off my CT335 at the box where all the hoses connect to, also there is a piece about 3 inches long held on with allen...

I am no longer in the market for a tractor. Today a 2012 Bobcat CT335 was delivered to my door. I have been shopping for quite awhile for a tractor and today was delivery day! I spent a couple...

I still am not understanding this shuttle shift... Do you need to come to a stop before shifting from forward to reverse? I do come to a stop but have read that it's not necessary? True or not?

Ct335 107 hrs, FEL, 8TB backhoe, like new... Make me an offer! Send pm for pics.

Has anyone installed a 3rd function kit to the loader on their Bobcat tractor, hard lines from Bobcat. I have a JD 3520 but my dad neglected to take my advice about getting it installed when he...

I've been reviewing the various posts on this site and appreciate your input, so I signed up to pose a question. I have been shopping for several months and like the Bobcat utility tractors and...

Was wondering if anyone else has noticed the hydraulic level not reading on the dip stick...? I can pull the dip stick and it won't show a level, put it back in and pull it out and it's at the...

I know that this has been in many previous threads but a renewal of information may be useful now. Many have bemoaned the prices of Bobcat filters and rightly so. The only reason to charge $100 or...

I am in serious negiotions on a CT335 and it sounds like several of you have this model and are very happy with it. Yes I know they are stopping production of the CT335 but I like the extra size...

Has anyone had an issue with the front axle pivot not taking grease? I greased mine, and it was difficult for it to take grease. Then after I did this, a few very hot days later, I noticed that...

Hello guys, I was just wondering if I can get some opinions. I am very close to purchasing a CT335. The dealer called back and said they had a brand new 2010 CT335 with full warranty and would...

Price check please. New CT335 Loader Cab with AC/Heat Chris

Hi, i have a ct335 bobcat tractor and was wondering if anyone else had this starting issue. After i let the glow plug light go off and turn the key to start , the tractor makes this clicking noise...

OK, need some help here. My CT335's MLS valve knob is stuck. I can not loosen it and I sure don't want to try and turn it any harder than I have as it will surely snap the shaft that goes into...

My local dealer told me this week that Bobcat was dropping the CT335 from their line up. I don't know whether to be sad, or happy that my tractor may become collectible as Bobcat's first...

Found the lifting limits on the 8tl loader Sunday. I had a 8.5' x 7.5' x 4 concrete slab that was pitching water into a recessed inside corner where the house and garage meet. During the last...

Well I have had to give up my dreams of a new tractor. Don't want to put off building a house over a tractor purchase. I have found a 2010 CT 335 with a bushhog and landscape rake with just...

After reading alot of discussions about tiller sizing for tractors I decided to look into renting one to try for putting in the garden. Checked with a couple local dealers that rent tractors and...

What is the going rate on CT335s these days? I am finally willing to accept a left-outside-over-the-winter model because apparently, the dealers got the machines at last year's pricing and also...

Hi, everyone, newbie here. I am getting pretty serious about getting a compact tractor and need some advice about what to get. The bottom line is that given the dealers in my area (central PA)...

Hi folks, I'm just starting the task of adding a grapple to my ct335 and am working on plumbing...I'd prefer to NOT use a diverter valve and instead tie into the Power Beyond port on the loader...

I have a ct335 hst had been moving some dirt for about two hours. Then when i hit forward pedal started to stall then hit reverse and same thing. So I turned it off and wouldn't restart for a...

Newly retired, bought second home, 42 acres at 8400'. Land is 1/2 flat, 1/2 hilly, fenced with a mix of buck&rail and smooth wire Must maintain 3/4 mile dirt road. Not running live stock, not...

Hi all just called my dealer and checked prices on filters and oil. Here is what he told me Engine oil 15w-40 buy anywhere Bobcat filter $7.70. Hydrostatic filter $77.60 Hydraulic Filter $23.77...

I was asked in another thread to post some pictures of my CT335 with cab. I know when I was considering purchasing this tractor it was very hard to find any pictures of a CT335 with a cab. Having...

When I purchased my CT335 with cab I thought I had researched everything about this model and asked the dealer all the right questions. I ordered the unit on the thought I might want to put a...

Lets talk block heaters for the CT335. First off, where would the plug/harness be located on the CT335? I looked around, but don't see one. I guess they don't come equipped from the factory with...

I am looking into buying a King Kutter tiller for my 335. I was wondering what size would be ideal? Would the 72" be to much since it is on the low end of the manufactures spec of 35-50 hp? I...

I received my new CT335 this week just as the temperature decided to drop down to -30C. The unit is equipped with, block heater, battery blanket and oil pan heater. I decided to try it out once...

One of my primary motivations for buying another tractor was increased manueverability. My other tractor is a 53 hp utility with a collar shift transmission, and it is a bear to use in any tight...

Well, pulled the trigger today...after lots or searching and research decided this was the best one for me. Mainly came down to price and dealer (both location and attentiveness). CT335 8TL...

I am seriously considering purchasing a new ct335. The dealer quote today was 16,300 + cost of loading rear tires. The price seems real good, but the only thing that I am afraid of is not being...

Has anyone gotten a quote on a CT335 with a cab? Wondering what they are selling for.

I've been looking at the CT335 with a cab and comparing to it similar size Kubota and trying to decide which one to purchase. I'll be using the tractor in the bush in the fall to get firewood...

Just got my new SST CT335. Used it a couple of hours each day for the last few days. 11 hours total on machine. MAN, this clutch takes a brute to push it!!!! Used a bunch of tractors in the...

I have narrowed my decision down to these two models. I just wanted some input. Any body using one? Give me your opinions.

I put 10 hrs on my CT335 SST and so far everything is going great (as one would expect with only 10 hrs). I have to say I am impressed with how well the tractor runs and performs. It has a ton of...

I have requested a quote for the best price available to day on at CT335 from my local Bobcat Dealer. CT335 HST, Front Aux Kit, dual Rear Remotes, 8TL FEL w/Bob-Tach, 8TB B/H (supposed to come...

My New Cat showed up today about 4:30 pm. I put it to work right away I got a 7 ft rear blade on it and i dressed up my quarter mile driveway right away. It ran and performrd perfect of course its...

I was all set to get a Kubota "L" series when I happened upon the Bobcat line. I absolutely love all the features of the CT335, BUT I am wondering if I am making the proper decision. Here's...

I have the option to buy a bobcat CT335 with FEL from a friend for 14000.00 the tractor has 200 hours on it. Is this a good deal? Also he will include a landscape rake which he paid 600 for.Thanks...

I'm new to posting on this site but not new to reading it. Everybodys two cents along with quite a bit of research and comparisons have led me to purchase my first tractor, a Bobcat CT335. It will...

Been reading a lot on this site and still can't decide which one should I buy... Using it only around the house moving dirt, logs and driveway. Any advise for newbie? I don't know anything about...

Has anyone had a problem with a fuel tank leak on their Bobcat CUT, namely a CT335?:( Does anyone know what the proper oil filter number is for a CT335. Went to do my 50 hour service and found out...

Hi all. I've been reading all the posts on here for a few days and decided to jump in. I am in the market for a new tractor and actually started out thinking MF 2605 or NHTT45 when I began to read...

Oh yes, happy joy, wahooo! Words alone cannot adequately describe the feeling you have when your first brand new tractor arrives. The anticipation, the telephone calls, the laying in bed reading...

What is the difference in these two tractors? Is it worth more money for the CT335? Thanks guys.

Hi Guys, I am interested in the Bobcat CT335, was quoted $15,200 cash with free loader (Bobtach). Has anyone done better than this in price in the tristate area. I don't mind traveling to pick up.

I have really had my eye on a new Kioti DK35seHST with FEL for $17k. Now I read on TBN that Bobcat CT335 is the same (or at least very similar) machine. After looking it seems to me that the...