Hey all, realized hydraulic filter has never been changed. can't find replacement info, anyone get one recently? Need to replace 4wd oil seal also. Is it difficult? working my way through all...

Hi Tractor family , I have a 2007 2310 TLB with 655 hours. I have a new issue and/or problem with a cold start. My sequence for starting is push up the throttle up a little bit. Then turn the glow...

HI all, new member here looking for help. i bought this tractor earlier this year and everything has been working great. i bought a 3pt auger for it and dug a dozen holes, used the BH for pulling...

Quick question. How do I pull the steering wheel off? I have a fly wheel puller for outboard motors that matches up, How ever, the 3 holes in the steering wheel is just plastic. What kind of...

I’ve been searching Facebook marketplace. I posted looking for advice on a JD. I think it was overpriced. So now, Im really interested in this Kubota fair price? It has 500 hrs. I’m in PA.

Wow, my first time to post here in TEN years! Can't believe that I remembered my password. Took 3 attempts though. loL! Glad to see some of the same folks still posting. GC2310 with almost 500...

Hey, since we mostly stick around here and post, I thought I would start a new thread (like others have done for different color tractors) for us to post about what we have done with our GC...

Hi, I have a 2004 GC2310 TLB Massey Ferguson. I bought it used and never got the user manual. I'd like to have one, does anyone have a pdf version? thanks, Vern

My selector valve is leaking out of the lever shaft and wonder if anyone has rebuilt one and had good results? Could not find a breakdown for the valve. Any help would be appreciated, thanks, Henry.

All, looking for suggestions. I own a MF GC2310 that has an MF2350 front end loader. One of the hydraulic cylinders has a leak at the stem where the hose connects. Thinking it could be a bad...

Hi, I had been running my tractor all day. I shut it off to do some sifting of soil but when I went to start it nothing happened. I checked the seat safety switch and the neutral position switch...

Video here (1:42): GC231 dipper lever won't center - YouTube The dipper level won't center when moving one direction (it centers back from the other direction) ... Also when moving in the bad...

Want To Buy 3-pt Hitch for MF GC2310

It is nice to have paper copies of the parts books for ordering and for assembly guidance. If you want paper or DVD books at a reasonable price, check agcopubs.com. A complete set of paper books...

Hi all, I have a 2006 MF GC2310. About a month ago, I was mowing the lawn. When I finished and stopped the PTO and turned the tractor off. Ever since then, it will not start again. When I...

I borrowed this MF GC2310 from my boss to do some tilling and a few other things around my property. Used it for a couple hours yesterday and today with the bucket and everything worked fine...

I was digging the other day.With GC2310 and I lost hydrulic any I deas?

Anyone know an online option for buying parts for my tractor? Thanks!

HI All... First real issue with my 4 year old GC2310. May daughter was mowing and shut it down to answer her cell but it won't restart. It Buzzes as if trying to start it in gear rather than in...

I have a 2007 Massey Ferguson 2310 (from the factory with a backhoe), 400 hours. I have a lead on a 2012 MF 2400, 11 hours at a fair price. I am wondering if I can easily transfer the hoe, frame...

Does anybody have a seal replacement proceedure for the Nimco Type 10151 hydraulic control. I would appreciate any information before I tear this apart.

Reposted from 2/10/13 on Parts/Repair. Several great people have responded to my post on that forum, however, it was recommended that I repost onto the M-F forum. I have a 2007 M-F GC2310 that I...

I don't know what these parts are called but I will try to describe what the problem is. Went out today and ended up hitting a tree stump on the front right hand side. OK so there is a hydraulic...

I just sold my truck that I had been using to plow the driveway(1500feet). I currently have a 6' 3pt snow blower on my GC2310, which I would use periodically for really big storms and occasional...

Okay Massey folks -- need an opinion... I looked at a GC2310 last night for sale, here are the details -- please let me know what you think is a good price and then I'll reveal what price I...

Hello Everyone, I have a MF GC2310TLB in great condition. It has about 225hrs on it and has had excellent service throughout. I just had the gear replaced, which I believe is a MF defect. It was...

Should I be able to lift/lower the MMM/3 point, while the backhoe is hooked up?(2007 GC2310) I attached the backhoe to move it, and noticed that my mmm would not lift after doing so.I have the...

I got a nasty surprise last week when I went to change my hydraulic oil and filter. I drained the oil and changed the filter, when I tried to tighten the filter I could not even get half a turn...

Have an opportunity to purchase a 2005 Massey Ferguson GC2310 TLB...very well maintained with no obvious physical or mechanical damage, 743 hours. Also comes with 60" MMM and a Howse 4' rotary...

The swing cylinder on my backhoe ('06 2310TLB) has been leaking for a while. I'm going to change the fluid next week so it'd be a good time to repack that cylinder. Anyone know the part # for...

Hello All, I'm a newby both to the forum and all things tractor, so please bear with me. I recently bought a 2007 MF GC2310TLB with about 120 hours on it. It was for sale as the result of a...

New here to this site: I found a new 2005 MF GC2310 TLB with 8 hours on it. A local dealer has it. They told me there would be a full warranty with it. What would be a good price for it? What do...

New here to this site: Need some help. Found a new Massey Fergusion 2005 GC2310 TLB with 8 hours on it at a dealer in my area. I wanted to know what a good price would be. They told me it would...

:confused: About 50 hours after I changed out the hydraulic fluid in my 2310 the hydraulic FEL control lever started to get a little stiff. Mostly in the down position and mostly after...

Background: Massey Ferguson GC 2310 with loader, backhoe, mid-mount mower purchase new in 2005 that now has approximately 390 hours. Help needed as the grass is getting way over my head as a...

I have a 2007 M-F GC2310TLB I bought new from a M-F dealer in the Concord area here in N.H. in May '07. I now have 100 hours on the clock. It was serviced per the manual. This winter whenever...

Just looking for info. The topmost hose on my backhoe got a big bubble in it than blew. Do you think that is a warranteable offense? There is no other damage, I just noticed it leaking the other...

Can someone give me step by step instructions to fix this leak. Thanks

I think I致e made my decision to purchase the GC2310 TLB based upon build and operation of this tractor. Now I'm new to this whole tractor thing so you may want to take this review with a grain of...

Any ideas if a thumb is available for the GC2310 backhoe?

One thing that I've noticed about the backhoe on my tractor is how much slack is in the arm around the pins. It looks like there should be a shim or something in there. :confused: Have any of you...

Well, I haven't visited here in a while but I just came back to post in the Kubota section looking for info on my Dad's tractor. I figured while I was here, I'd check in at the MF forum and tell...

Hi Folks, I took position of a new GC2310 this weekend. It seems well built and heavy duty construction for it's size, but I'm new to tractors, so I'll reserve judgement until I've had it a while...

Hello, After reading a lot of the threads on this forum and spending way too much time researching sub-compact tractors, I finally went and bought the GC2310 TLB. I bought it from Northwood...

.........and my backyard looks like a minefield from all of the "practicing" today. :D :D This thing is a blast to play with. I've operated heavy equipment for a living before from Cat D9's to...

I've finally got 11 hours on my GC2310, and thought I'd post my experiences. It's all been snow clearing so far. To make a long story short, we finally moved into our new house, only 6 months...

The swing piston on backhoe has some play in it, it takes grease fine. Is this normal? The machine has about 120 hours on it, about 1/4 of that is backhoe use. Also is there a guard for the...

Anyone know of other brand attachments that will fit the GC2310TLB? (Other than AGCO of course) I know I can get plenty of rear 3pt implements. I'd like to find a front mounted mower deck or a...

Hi, I was looking at my swivel seat base, and I was wondering if I put stiffer coil springs on pin that hinges the base, would it lift better? My wife has trouble holding up weight of seat to turn...

Greetings, I have about 50 hours on my new toy. I have used the hoe a fair bit and have noticed a fair bit of play in the boom ( side to side ). Seems to have the play on the single ram ( for side...

10 hrs and loving it! I was nervous that it would not be enough machine for me but that is not the case. It has already done more then I had hoped for.

So I got to play on my new ride. After a couple of hours I gave her a look over and noticed one hose on the loader appeared to be leaking. It felt tight though. How torqued should these fittings...

First off I'd liked to say hello to all being new to the forum. I have found alot of useful information and it helped in my decision to purchase the 2310. I do have a few questions: 1) When I put...

I am due to to receive my new GC 2310 TLB tomorrow. This is my first real ride on tractor. My gravely will be sad, but I hope to get a lot more done. I have about 5 acres I plan on working for...

I bought my GC2310TLB.... tach, rh exhaust, high lights etc..... for $15,300 from Cut and Farm Tractor in Athens, Alabama. 1.5% sales tax. I thought it was a good price. ovmech

Just bought a GC2310TLB and dropped off the BH to hook up my bush-hog. When the tractor was dropped off this morn I got a bag of hardware that included what looks like a Loop for the Hyd system...

I posted in the comparison section, but I thought I should post my decision here too. After much thought and comparison, I bought a GC2310, factory FEL, BH, R4's, plus Massey 48" tiller and 54" 6...

I'm selling my GC2310tlb.The machine has been garaged[has seen 3 coats of wax],48hrs,massey red canopy,markham tooth bar,hooks welded on the front bucket and extra massey filters.Very good...

I recently purchased the GC2310 and also was disappointed with the exhaust discoloring the loader frame. I found that a copper 1 1/4" ell would work to redirect the exhaust to the side. The...

Just got my new unit and am very pleased with the way it handles the jobs I have put it to so far. Also, most pleased with the dealer -Lemon's Farm Equip. in Parkersburg, WV. I dealt primarily...

Been looking at the Massey GC2310TLB and the Kubota BX23. I have visited a couple of Massey dealers and gotten pretty much the same price - around $16,400. This is in New England - NH to be...

Have narrowed my tractor choice down to these two units. GC2310 @ $18,500 and BX23 @ 17,575. Plan on adding a mulching 54” deck to either one. 1+ acre cleared land/grass/yard with 1 80’ long...

which machine is best need advice before I buy

can this be done if so how

Gents, I figured I should post this here due to it's BX22 vs. GC2310 interest. Pic #1 - BH mount closeup

Spb1971 recommended that I check out the MF GC2310 since I was getting frustrated with orange dealers and BX22 non-availability. Well, it was dropped off Saturday! After I drove it to the...