Its not near the issue it was 20 years ago. I make computer chips and they are designed so much better now than they used to be. Yes, don't turn your computer on and off every 30 seconds, but if you are going to be gone over an hour or two, you are fine.
Computer on or off?
- Thread starter JDGREEN4ME
- Start date
- Views: 8326
Its not near the issue it was 20 years ago. I make computer chips and they are designed so much better now than they used to be. Yes, don't turn your computer on and off every 30 seconds, but if you are going to be gone over an hour or two, you are fine.
Chuck52
Veteran Member
I went around my employer's building and added up the wattage of the lights in the largest rooms in the building. If they would turn the lights off for just 5 hours a day in those rooms (no one here then, anyway) they would save $12,000.00 a year. I got a big thank you and a cool coffee mug.
So.......did they turn them off, or did you just get the mug, and a nice "Thank you and please go away"?
Chuck
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Good point. I know of a few situations where someone pointed out how a co. could save a few thousand a year.. and they were more or less punished or reprimanded for being too nosey!
No good deed goes unpunished!
soundguy
Heywood Jannockitov
Platinum Member
- Joined
- Jan 9, 2008
- Messages
- 806
- Tractor
- Deere 27d, JD 5425 cab, JD F620, JD XUV 850D, Case 580 SE, IH 484
I don't leave my vehicles idling 24 hours a day when not in use, so I don't leave the home computers on either. Seems like a waste of energy. They can't get hacked into if they're off either. I suppose if you abandon your telephone land line and opt for VOIP service through your computer such as that MagicJack gizmo, then I guess you would have to leave the computer on all of the time.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Another good apples to oranges comparison as with the car running analogy...
soundguy
soundguy
zimcocomp
Member
- Joined
- Dec 31, 2008
- Messages
- 41
- Location
- West Newfield, Southern Maine
- Tractor
- Kubota L2550 4wd, & Bolens QT 16, w/ Diy FEL
As a person owning a computer repair business I find that computers that are left on continuously need to be cleaned of collected dust and lint, so if you have applications requiring the PC to be on most of the time I recommend more frequent disassembly and cleaning. It is amazing the collection they can make in the cleanest of surroundings.
Heywood Jannockitov
Platinum Member
- Joined
- Jan 9, 2008
- Messages
- 806
- Tractor
- Deere 27d, JD 5425 cab, JD F620, JD XUV 850D, Case 580 SE, IH 484
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Compairing internal combustion to electro mechanical.. or plain electronic / silicon junction?????
soundguy
soundguy
Iplayfarmer
Super Member
Thanks for the heads up. I've noticed anytime I open my case at home that I have a lot of dust build up. I'll make a point to clean it out more often.
Heywood Jannockitov
Platinum Member
- Joined
- Jan 9, 2008
- Messages
- 806
- Tractor
- Deere 27d, JD 5425 cab, JD F620, JD XUV 850D, Case 580 SE, IH 484
Good advice zimcocomp, I cleaned about 50 belly buttons worth of lint out of my Dell "Ionic Breeze" desktop.
