1652 w/pics

[daveinnh]

I wish the 3 pt. hitch had a lever to lower and raise the arms at the rear of the tractor. It's a real pain to keep walking around to the cab to raise and lower the arms when hooking implements up.

So how does Massey have you raise/lower the 3pth w/o a lever?

Dave

 

[MF1652]

So how does Massey have you raise/lower the 3pth w/o a lever?

Dave

Was wondering why you asked, then I went back and read my post again. I should have worded that differently. It has the standard lever inside the cab to raise and lower the 3 pth. I wish it had a means of doing this at the rear of the tractor to save from going back to the cab every time to make the adjustment on the hitch from inside the cab. I have seen some posts where people have modified their tractor to be able to adjust the 3 pth from the rear of the tractor without going back inside the cab.

 

[charleyfarmall]

I added an external lever to my McCormick It has made it so much easier to attach things. If I get a 1652 I would likely do the same.