Ballast Photos

[Steve_Miller]

I need to make me around a 1200 pound one out of Concrete .
What's the Dimensions of that one .

Sent from my iPhone 5 using TractorByNet

Concrete is about 150lbs per cubic foot. Just do some math and design to fit your limits. I just worked it out so it would allow it set on the ground and release from the hitch.

Steve

 

[MorningViewStables]

Finished except for a little paint to keep the rebar from rusting. The fork slot forms are giving me some trouble to get out, but I allowed for that and made sure the forks would fit the slot even if the forms were in there and had to come out slowly. I am very pleased with it and look forward to using it tomorrow.

SPECS: 20"X15.5"X71.25" - 21 & 1/2 bags of 80lb Quikrete - 60 lbs of rewire & rebar. Approximate weight 1750lbs.

 

[Underdog57]

Looks very nice, I will be building one very soon.

 

[MorningViewStables]

Looks very nice, I will be building one very soon.

Thanks! Give or take for water weight, soaking wet I bet it weighs close to the 2000lb mark.

 

[Underdog57]

I am shooting for 1500# on mine (23" x 23" x 42")

 

[MorningViewStables]

I am shooting for 1500# on mine (23" x 23" x 42")

You may be a little heavy as your volume is very close to mine at near 20 cubic feet.

Sent from my iPod touch using TractorByNet

 

[Notforhire]

Right now it's around 800# if I remember correctly.

I intend on adding on a few hundred pounds.

 

[Underdog57]

Those are rough numbers. It is actually 20.75" x 20.75" x 41.75" = 10.4 cubic feet. Redi-mixed concrete should be between 142# - 144# per cubic foot. I am forming it with treated deck boards and will not be taking the forms off.

 

[Underdog57]

View attachment 365308

Right now it's around 800# if I remember correctly.

I intend on adding on a few hundred pounds.

Nice job! How does it look on the green machine?

 

[MorningViewStables]

Those are rough numbers. It is actually 20.75" x 20.75" x 41.75" = 10.4 cubic feet. Redi-mixed concrete should be between 142# - 144# per cubic foot. I am forming it with treated deck boards and will not be taking the forms off.

Wow. I suppose I had not had enough coffee this morning. I missed a digit somewhere. I though I multiplied and divided by 1728, but I am old and it was early. I was wondering why only 5 inch in on plane was offsetting 30 in another... Never listen to me before noon.