Dutch445
Elite Member
makes hooking up the top link on the Pat's system look even better!
Quick Hitch disappointment
- Thread starter daugen
- Start date
- Views: 17714
-
- Tags
- quick hitch
k0ua
Epic Contributor
so when you do your worst case scenarios, there's a labor number. Hmmm. About the same as that fancy new adapter.
Not if you can weld...and I needed a good reason to start.
If you were to ask me (and I realize no one did) everyone that owns a tractor should also own and know how to use a welder. They are not that expensive, and it ain't that hard to learn.
Not if you can weld...and I needed a good reason to start.
If you were to ask me (and I realize no one did) everyone that owns a tractor should also own and know how to use a welder. They are not that expensive, and it ain't that hard to learn.
OP
daugen
Epic Contributor
well assume I did ask you Jim and yes I sure agree with you. It's why a nice new welder has been in my garage for a year. Bought it and then my arm went bad. Well that's fixed now, luckily not with a welder...
k0ua
Epic Contributor
well assume I did ask you Jim and yes I sure agree with you. It's why a nice new welder has been in my garage for a year. Bought it and then my arm went bad. Well that's fixed now, luckily not with a welder...
Maybe we can weld up an exoskeleton for that bum arm
OP
daugen
Epic Contributor
Maybe we can weld up an exoskeleton for that bum arm
I sure hope not...but i have about four different kinds of pads and protectors for it. I squashed my ulnar nerve (on the desks over forty years?)
and now I have to protect it. but a little foam will do. We'll save the sparky stuff for later.
PapaPerk
Veteran Member
- Joined
- Jun 12, 2004
- Messages
- 2,293
- Location
- USA
- Tractor
- Kubota L3830, Ford Golden Jubilee, 1939 Sears Economy, Polaris Ranger 400, Honda Foreman 450 ES, 2004 Dodge Diesel 3500
You are disappointed with the quick hitch because the implements are not built to industry standard specifications?
Sounds backwards to me.
Bruce
Completely agree!!
OP
daugen
Epic Contributor
lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 7,948
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
I bought the CAT 2 quick hitch from Tractor Supply and found that the only implement that it fits is Bush Hog 3 point cutter even though the Hay King Pasture renovator and other items are supposed to be "QH Compatible". The clevis ears on the renovator were about 1/2" too narrow for the QH. Everything else was off even more. Took the QH back to TSC.
Have a set of the CAT 1 Delta Hook on Kubota B2710 with receiver plates on box blade, rotary cutter, disc. I can hook up or drop them in a few seconds. Add about 30 seconds to hook up PTO on cutter. Having the hydraulic upper link from Fit-Rite makes it even easier and faster.
I am seriously considering biting the $$$$ bullet and buying a set of CAT 2 Delta Hook plates. The Delta Hook receiver plates have significant adjustment for varying width lower pins or clevis'.
Have a set of the CAT 1 Delta Hook on Kubota B2710 with receiver plates on box blade, rotary cutter, disc. I can hook up or drop them in a few seconds. Add about 30 seconds to hook up PTO on cutter. Having the hydraulic upper link from Fit-Rite makes it even easier and faster.
I am seriously considering biting the $$$$ bullet and buying a set of CAT 2 Delta Hook plates. The Delta Hook receiver plates have significant adjustment for varying width lower pins or clevis'.
Jack Yuan
Platinum Member
- Joined
- Apr 14, 2013
- Messages
- 507
- Location
- Changzhou, JiangSu, China
- Tractor
- Jinma 504, Jinma 904, DF1604, YTO X1804
What have you been up to Jack???? Haven't heard much out of you for a while. Hope things are well over there. We sent the First Lady over to entertain you folks. You can keep her if you like....
hahahahaha, I m busy in my business, USA First Lady come here entertain those big VIP of government, not me, doesn't Abama feel lonely without her???