kioti nx6010 hst cab

Dan Burgdorf · Mar 3, 2015

He said it was a 2014. I have a picture of the tag but I don't know how to post it here. Confusing isn't it?

ritcheyvs · Mar 3, 2015

Here is the year codes as best I know based on TBN member inputs: serial_number

murphy1244 · Mar 3, 2015

ritcheyvs said:
Here is the year codes as best I know based on TBN member inputs: serial_number

That's the codes I have too.

kapper · Mar 6, 2015

Dan Burgdorf said:
Eric, I just bought a NX6010 in August 2014. Serial number PN3900033. What year is it ?

My serial on the new NX6010 is PN3900092. If I'm reading your breakdown right, this would be a 2015? Should I call her "number 92??"

I should be getting it today, Sat or Monday.... It is ready except he is waiting on the fuel line heater, (which thanks to another poster I learned) and UPS did not show up yesterday! Normally, I'd just have it put in later, but seeing how its still frigid, and I need to plow over 1/4 mile of driveway just to get us into our house that we are moving to I thought it prudent to wait to have the fuel line heater installed!!

murphy1244 · Mar 6, 2015

kapper said:
My serial on the new NX6010 is PN3900092. If I'm reading your breakdown right, this would be a 2015? Should I call her "number 92??"

I should be getting it today, Sat or Monday.... It is ready except he is waiting on the fuel line heater, (which thanks to another poster I learned) and UPS did not show up yesterday! Normally, I'd just have it put in later, but seeing how its still frigid, and I need to plow over 1/4 mile of driveway just to get us into our house that we are moving to I thought it prudent to wait to have the fuel line heater installed!!

Yours is a 2014 too.

kapper · Mar 6, 2015

kapper said:
My serial on the new NX6010 is PN3900092. If I'm reading your breakdown right, this would be a 2015? Should I call her "number 92??"

I should be getting it today, Sat or Monday.... It is ready except he is waiting on the fuel line heater, (which thanks to another poster I learned) and UPS did not show up yesterday! Normally, I'd just have it put in later, but seeing how its still frigid, and I need to plow over 1/4 mile of driveway just to get us into our house that we are moving to I thought it prudent to wait to have the fuel line heater installed!!

well, here she is boys... my first Kioti video..

Watch "Unloading the Kioti NX6010 HST Cab" on YouTube
Unloading the Kioti NX6010 HST Cab: http://youtu.be/i4eeoFdlLjc

MinnesotaEric · Mar 6, 2015

kapper said:
well, here she is boys... my first Kioti video..

Watch "Unloading the Kioti NX6010 HST Cab" on YouTube
Unloading the Kioti NX6010 HST Cab: http://youtu.be/i4eeoFdlLjc

Video wise, copy the link, and hit the little film-looking icon in the text box and a window will open, paste in your video link, and *poof*

Good first video!

What Rhino blade is that you're using in the video?

kapper · Mar 7, 2015

EricTheOracle said:
Video wise, copy the link, and hit the little film-looking icon in the text box and a window will open, paste in your video link, and *poof*

What Rhino blade is that you're using in the video?

OK, Thanks Eric! I did that one from my phone so it was a pain just to read it all on the itty-bitty screen.

Lets try this one. Now, its like the sobering morning after the party.... Just set up my auto pay for the new Kioti mortgage!!!

The blade is a Rhino R500. That thing is junk though.... Dang near impossible to make the pin adjustments, and it is rusted through in several spots from sitting on his lot for 6 months... Plus, its just a bit chinsy all the way around. Kind of a waste of the 1,000 but I needed a blade 'yesterday.' He said he gave it to me below his cost with the package deal. I hope so.

Threepoint · Mar 7, 2015

kapper said:
well, here she is boys... my first Kioti video..

[snip]

Well done, kapper! Congratulations! Thanks for posting.

MinnesotaEric · Mar 7, 2015

kapper said:
OK, Thanks Eric! I did that one from my phone so it was a pain just to read it all on the itty-bitty screen.

Lets try this one. Now, its like the sobering morning after the party.... Just set up my auto pay for the new Kioti mortgage!!! The blade is a Rhino R500. That thing is junk though.... Dang near impossible to make the pin adjustments, and it is rusted through in several spots from sitting on his lot for 6 months... Plus, its just a bit chinsy all the way around. Kind of a waste of the 1,000 but I needed a blade 'yesterday.' He said he gave it to me below his cost with the package deal. I hope so.

Ugg. Sorry to hear about your blade. Can you take a drill and hog out the holes a titch for easier use? I just got done looking at pallet forks, and for the money, it looks like Everything Attachments forks are pretty good. I also plan to but their landscape rake at some point. Right now I need something that can transport a larger quantity brush and small logs from one pile to a burn area better than my existing Everything Attachments grapple. Anyway, all to say that you may want to check out Everything Attachments—especially so since you're within their free shipping radius.