What did you do to your Yanmar today?

   / What did you do to your Yanmar today?
  • Thread Starter
#71  
WP_20170109_16_51_37_Pro.jpgWP_20170109_16_47_42_Pro.jpg

These would have to be the best 2 implements I ever bought, PH Auger and forks. That leak looks to be on the outside of the seal and not on the shaft.Even a big slurp of Lucas stop leak won't fix this one.
 
   / What did you do to your Yanmar today?
  • Thread Starter
#73  
Paul, what a gorgeous site you have there!

It is a beautiful and peaceful part of the country. I'm only less than an hour from Melbourne yet it feels like I'm hundreds of miles from any capital city.
 
   / What did you do to your Yanmar today?
  • Thread Starter
#74  
WP_20161230_14_01_17_Pro.jpgWP_20161230_14_01_26_Pro.jpgWP_20170109_16_36_29_Pro.jpg

I've been busy building a new internal fence, this time it's much more sturdy as my wifes horse destroys normal wire fencing...:smiley_aafz:
 
   / What did you do to your Yanmar today? #75  
Is that your augur, and did you try it? You might be surprised. I wrapped a length of bailing tape around the putput seal of my rotary mower and started a pouring leak. Lucas has held for about 10 years now. Approx same viscosity as 90wt.
 
   / What did you do to your Yanmar today?
  • Thread Starter
#76  
Is that your augur, and did you try it? You might be surprised.

Yeah Norm I did. I stuck about 200mL of stop leak in it but it still persists. Even that is leaking out now too.
 
   / What did you do to your Yanmar today?
  • Thread Starter
#77  
A few weeks ago I stuck some prestone ring sealer in my YM14 to see if I can slow down the oil burning. Using it today I think it has slowed it out the exhaust as it is nearly non existant there but I think the blowby is worse? I'll have to keep an eye on it. I did manage to seal up the injectors as they don't suck air or leak past any more but it still runs like a pig at idle.
 
   / What did you do to your Yanmar today? #78  
A few weeks ago I stuck some prestone ring sealer in my YM14 to see if I can slow down the oil burning. Using it today I think it has slowed it out the exhaust as it is nearly non existant there but I think the blowby is worse? I'll have to keep an eye on it. I did manage to seal up the injectors as they don't suck air or leak past any more but it still runs like a pig at idle.
I have used Restore on a golf cart and It slowed the oil smoke out the tailpipe, you could try that as well.
 
   / What did you do to your Yanmar today?
  • Thread Starter
#79  
I have used Restore on a golf cart and It slowed the oil smoke out the tailpipe, you could try that as well.

Actually, is that in a yellow bottle? The stuff I bought was made in the US and to be honest I can't be sure it was Prestone?
 
   / What did you do to your Yanmar today? #80  
Actually, is that in a yellow bottle? The stuff I bought was made in the US and to be honest I can't be sure it was Prestone?

NO its in a silver and black bottle, mostly silver I believe.
 

Tractor & Equipment Auctions

2013 Doyle Dry Fertilizer Tender Trailer - Kubota Diesel, 3 Stainless Compartments, Side Discharge (A52128)
2013 Doyle Dry...
2018 WACKER NEUSON RD28 120 DOUBLE DRUM ROLLER (A51242)
2018 WACKER NEUSON...
Tree Boom (A50322)
Tree Boom (A50322)
2016 KUBOTA SVL95-2S SKID STEER (A51242)
2016 KUBOTA...
2018 infintit Q50 (A50324)
2018 infintit Q50...
2021 GMC SIERRA CREW CAB TRUCK (A51406)
2021 GMC SIERRA...
 
Top