JLH4
Silver Member
You didn't say where you are in your profile, but if you are around a Rural King their tractors are assembled in the USA, Ill. and Fla. I believe.
"Most" American-built Compact Tractor....
- Thread starter MIGLH
- Start date
- Views: 40025
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
The little Steiners and Ventracs are QUITE american.
chevy
Platinum Member
- Joined
- Mar 6, 2003
- Messages
- 915
- Location
- East Central, Indiana
- Tractor
- Kioti CK3510SE HST, John Deere X739
I know, but it is not what this says. It is on the internet, so it has to be true.
Where Are Kioti Tractors Manufactured? | Reference.com
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
And when that isn't believed some still think Kubotas are built along side Kioties in the same plant, the owners of each after all being brothers! Just from a different mother, I guess.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,709
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
So are Power Tracs. Made in VA.
Howerver, the OP is looking for more AG type machine, I think, and Steiners, Ventracs and Power Tracs are not AG type machines. Very capable machines in their own right. I think the Power Tracs are more versatile than the others, but the others are better at some tasks. The PT design runs circles around a conventional tractor in tasks like loaders, mowers, brush cutting, snow plowing, forklifting, post hole digging, etc... the things they are not good at is pulling brute force, like dirt plowing, or a hay bailer I'd imagine. So things like that have to be considered.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,709
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
That guy on the right is a robot hanging from the ceiling by his ear connector....
Imold
Platinum Member
- Joined
- Jul 23, 2019
- Messages
- 806
- Location
- West Central Mn.
- Tractor
- MF GC1705, Cub Cadet RZTL, Husqvarna Rider.
I believe the MF Compact and Sub Compacts are finished in Georgia, ie ropes,tires,loaders and a few other bolt on items.
k0ua
Epic Contributor
I will assure you my Kioti was NOT made in NC.. It was made in South Korea. The tires likely have been put on here... They are goodyear.
k0ua
Epic Contributor
Nearly all compact tractors are "finished" here in the USA. A few parts "may" be even made here. But not many. Kubota has an assembly plant in Georgia, but the main parts come from Japan. Engines, transmissions. etc. It has been decades since a compact tractor was completely manufactured here in the USA>
m5040
Platinum Member
- Joined
- Nov 23, 2008
- Messages
- 991
- Location
- CT
- Tractor
- Kubota M6040 L2250, JohnDeere 310D, Ford 841 Elenco, Ford 961, Trapmaster, PT180 w/LM bucket and 45" brush cutter, PT1430 Deutz w/grapple bucket, Antonio Carraro Tigrecar 6500. John Deere 5300. Former owned Steiner 430 max, Goldoni REV Maxter 7
What are you doing with it? If not pulling a plow through a field I would take a serious look at Power-trac for a versatile utility tractor. I have both types of tractors and really like the Power trac for easy on and off, the quickest "Quick attach" I have ever used, simple to repair, the attachment is right in front of you and not over a long hood, I could go on....
