What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY

[GeneV]

Dented the hood, while clearing out 1/2 acre or so that will become horse pasture.

War scar, is all good.

 

[cglaser104]

Dented the hood, while clearing out 1/2 acre or so that will become horse pasture.

Been there, done that lol. Battle scar for sure

 

[Imold]

The GC1705 is still a virgin when it comes to battle scars but I am sure it’s time is coming being it is still pretty new.



My 2 link tire chains came today.

 

[cdaigle430]

nothing-she is sitting in the garage all lubed up, fluids checked, battery on tender waiting for the next snowstorm.

 

[MoMower]

War scar, is all good.

Yeah....lower right side, a large branch got stuck between the tire and hood and I turned the wheel before I noticed...looks tougher now..lol

 

[Langanobob]

I got a small can of Massey Ferguson red paint at Tractor Supply. Not a perfect match but it covers small scratches pretty good. As for what I did to my tractor today, last week I took off the loader and put the snowblower on. Now it’s raining instead of snowing and of course I need the loader. Thinking about swapping them but just thinking, not doing. Also time for an oil change.

 

[MF RED in MT]

Almost done with my MF 2360 snowblower modification project using 1/8" thick UHMW to line the 3 fan blades, the transition discharge area and the chute.

Finished installing the UHMW on the small transition area in between the fan/fan blades and the discharge chute (used 1/8" diameter stainless steel blind pop rivets).

Pictures are: cardboard patterns and UHMW shaped for installation (2 pics), and UHMW installed on the transition area of the snowblower.

Only thing left to do is install the 3 fan blades UHMW and reassemble everything.

KC

(next update about this project, see post #83)

 

[MoMower]

Almost done with my MF 2360 snowblower modification project using 1/8" thick UHMW to line the 3 fan blades, the transition discharge area and the chute.

Finished installing the UHMW on the small transition area in between the fan/fan blades and the discharge chute (used 1/8" diameter stainless steel blind pop rivets).

Pictures are: cardboard patterns and UHMW shaped for installation (2 pics), and UHMW installed on the transition area of the snowblower.

Only thing left to do is install the 3 fan blades UHMW and reassemble everything.

KC

View attachment 631560 View attachment 631561 View attachment 631562

Very nice, I’ll drop mine off, How much?

Lol

 

[cglaser104]

Today the DL95 is a deer holder. Chocked the loader with a piece of cedar to make sure she stays put til we got the processor in the AM

 

[MF RED in MT]

Very nice, I’ll drop mine off, How much?

Lol

The wife has told me that the upstairs loft, bedroom, and bath is not going to be used for anymore of my winter projects, sorry.

I have really gotten use to the warm conditions versus the unheated garage, well almost, have a propane tube heater on a HF 4 wheel cart which is handier than the wood stove since it can be rolled around the garage.

And also in the garage, the German Shepherd is always dropping his slimy Frisbee in the middle of my project every few minutes for me to throw...

KC