I think maybe didn't accurately clarify what I was trying to do, and why. I'll add some further info.
The bypass I'm envisioning (hydraulic rated ball valve or something similar) is for when the backhoe is still connected to the tractor.
What I want to do is essentially be able to dig with the backhoe, jump in the cab, drive the tractor and use the loader to move dirt and get back on the backhoe and dig some more holes. That's the scenario in a pretty package so to speak.
The problem is this....
The Agco tech, service manager and the afixed warning labels are telling me that when you are using the power beyond, whether for a hoe, log splitter, ect that you have to disconnect the attachment and loop it back before you can use the loader or drive the tractor (except for creeping forward IE digging a ditch.
That is a huge pain in the **s when you are doing a job that requires using the hoe and loader back and forth.
Because of this i was thinking making a circuit with tees and valves to switch back and forth without having to turn off, relieve pressure, disconnect, reconnect over and over in a day.
Had I known this was how it operated before I bought the tractor, and hoe and frame and power beyond, I would have stuck with the tractor as an ag tractor and purchased a used actual backhoe for the same money.
OR..... is there something that I am missing or have been completely missinformed on?
Any Massey owners or techs that might be able to chime in on this to?
I have searched online, but have not found an answer to what I was told either way.