DaBear3428
Platinum Member
lol John i was asking for where on the tractor the bolts are located
5145, 50 hour service
- Thread starter confederatemule
- Start date
- Views: 39106
John stark
Member
- Joined
- Mar 14, 2022
- Messages
- 44
- Tractor
- Mahindra 4540 2wd
I said in the post....the 4 bolts under each cradle of the fel....both sides total of 8 bolts were loose
OP
confederatemule
Silver Member
- Joined
- Mar 30, 2009
- Messages
- 137
This ain't got nothin to do with the 50 hour service, but...
Have any of y'all had a problem with cleaning the paint off of the PTO shaft? If so, how did you get the shaft clean enough for the drive line to slip on?
Have any of y'all had a problem with cleaning the paint off of the PTO shaft? If so, how did you get the shaft clean enough for the drive line to slip on?
DaBear3428
Platinum Member
loser drive line coupler?
OP
confederatemule
Silver Member
- Joined
- Mar 30, 2009
- Messages
- 137
The drive line coupler slides on & off of my Massey 255 just fine.
DaBear3428
Platinum Member
I have not used mine yet so i'm interested in the answer also
OP
confederatemule
Silver Member
- Joined
- Mar 30, 2009
- Messages
- 137
The coupler slides on just fine now. This afternoon I tried a putty knife to get the paint off, no luck. I engaged the PTO shaft and while it was turning I used a welders wire brush, no luck. Next I got a pocket knife (one I was not fond of) and used it to whittle the baked on paint off, it worked. The next step was to clean in the groove of the spline, but before I did this I tried to slide the coupler on. "IT SLID RIGHT ON" just like on the old Massey.
OP
confederatemule
Silver Member
- Joined
- Mar 30, 2009
- Messages
- 137
Ye know, the more I think about it I think I have read about other folks having a problem with this. I think I even posted in the conversation. I have looked for it but I can't find it.
DaBear3428, I think it was in your thread about the 5155.
DaBear3428, I think it was in your thread about the 5155.
DaBear3428
Platinum Member
I think you are talking to the 30 year old Dabear this version has a hard time remembering what i ate for dinner last night.
good info none the less thanks
OP
confederatemule
Silver Member
- Joined
- Mar 30, 2009
- Messages
- 137
Had the dealer do the 50 hour service today. The total came to $399.27. This is the the list of parts.
006016642V91 = oil filter
006000455F1 = outer air filter
006000456F1 = inner air filter
006038451V01 = fuel filter
007202702C1 = spin on hydraulic filter
407352R5 = engine oil
The price on the spin on filter was $108.61 so I am sure it included hydraulic fluid.
I did not look at the ticket till after I got to the house cause my lunch must have made me sick. Something made me a sick old man. I'll be calling them tomorrow to ask some questions just so I'll know.
006016642V91 = oil filter
006000455F1 = outer air filter
006000456F1 = inner air filter
006038451V01 = fuel filter
007202702C1 = spin on hydraulic filter
407352R5 = engine oil
The price on the spin on filter was $108.61 so I am sure it included hydraulic fluid.
I did not look at the ticket till after I got to the house cause my lunch must have made me sick. Something made me a sick old man. I'll be calling them tomorrow to ask some questions just so I'll know.