I'm looking for a slightly used 72 inch mid-mount mower for a B3030. There seemed to be a number of them last fall. Now I'm having a hard time finding one. I guess the saying is correct, " you snooze you loose".
Any leads appreciated.
The system will save in memory any error codes that occur. They remain in memory until deleted even if the source of the error has been resolved. Any chance you may have missed seeing an error code? Attached provides instructions to recall errors.
T12 and T13 are the swash plate main and...
See attached
I would run thru Test Mode A and check the feedback from various sensors. In particular T10 and T11.
Don't hesitate to ask for more info. My binder is 5 inches thick!!!
Regards.
Auto throttle is a mechanical cable
Travel pedal sensor provides feed back to the ECU.
I would start there. Perhaps you will be lucky and find the connector loose.
Let me know if you would like further info..
Regards
Wondering if anyone knows if buckets from say an L48 or L39 or M59 or perhaps any of the excavator buckets will fit on the M59? If not it seems like an awful lot of different buckets that they have to make to avoid allowing this convenience. I realize size of the hoe would be an issue but some...
I have been looking at a Laurin Cab for my new M59TLB. I had a hard time finding details of the cab. Most say it is well built but there is little info on the web. It must be purchased thru a new tractor dealer acording to Laurin. I'm retiring sooooooo I'm giving it a close look. Probably...
I had the opportunity to look at one of their trailers at a rest stop in NY. It looked like a nicely built trailer. I can't seem to find many details on line.. empty weights, dimensions etc. I would appreciate hearing from anyone in the PA area where they are made that has looked at them or...
I'm in the process of buying a L39 and want to set the hydraulic controls up for a FEL mounted V-plow. I have connected conventional power angle plows to tractors and trucks but never worked with the controls for a power angle v-plow.
Seems like the cylinders will be double acting and will...
I recall reading a discussion recently regarding the use of the FEL and stabilizers to lift the tractor while using the BH. I noticed the attached pictures on the Kubota site both with the tractor raised off the ground.
I'm not trying to support either point of view. I just thought the...
I'm looking for a pto driven vacuum similar to the unit shown at the following link:
VOTEX
I have looked at the Trac-Vac. I saw the Votex unit while on a trip to Italy. Can't find a dealer in the US.
I've noticed a build up of black residue on the FEL arms. The exhaust discharge is aimed directly at the arms in the lowered position (B3030/LA403). I suppose this occurs primarily when the machine is left idling.... startup without adequate preheat?... In any case it is not easily removed...
I try to track service bullitens on line for vehicles I own.
Does anyone know if these are available on the internet for tractors, in particular for Kubotas?? I think this type of information would be a great addition to a forum such as this.
DandB
Thanks to TBN I now have the part number for the replacement cylinders for a BH75. I can't find any numbers on the cylinders and wonder if anyone knows where they are? Perhaps they are on the back-side that can't be seen?
Can you tell from the Serial number on the hoe if it has the new...
Would appreciate hearing from anyone with experience adding work lights to a B3030. How much current can you draw from the standard dynamo? Has anyone upgraded to the alternator? Is there an alternator kit for the B3030? I've read about the BX alternator kit but didn't find anything...