Search results

🤬 🤬 🤬 :mad: True

Don't think so, but until last year I still had a full USAF uniform hanging there for no reason other to remind me how much thinner I used to be. Been there through many homes over the last 40 years. Funny what you do hang on to over time. Then again I have some tools from my teens. Just...

What he said, you may be able to press the gland in if you have something or rig it. My log splitter was just like that.

Median is fine (includes very high earners) and you included OFF FARM income. Now do the bottom 10%, not all farmers a great from day one. Or do the they not matter? I know farmers that make 100+k in full time jobs but mostly break even on farm income. It a choice some make or have to make to...

I would never ever trust my wife. Panic and do the exact opposite of what is needed.

Combat

Hackman deaths now ruled suspicious and under investigation.

Good on you.... lot of legal ways to play the game.

As long as you losses are mostly depreciation it is not fatal. If you run actual cash flow into the red it is never a good year. Had bad years but held on until I retired, managed to pay the place off. Now is just raise my own food and try to sell enough cattle to pay the feed bills. Most years...

Salary IS an expense and fully deductible in the right business structure. My corp was held in a trust and I was just the hired hand to run the operation.

Having a bunch of semi feral cats around here. Easiest for me was to learn and remember to tip the seat forward when I park the tractors, mowers, etc. Cheap and effective.

Goats sell for around $100 to 150for adults here, for just meat goats. Kid can be half or less. Not Registered or fancy. Milk goats tend about 200+ If you time it right, you can get em free when someone is pissed at them.

I use Irish Dexter, they will clear both brush and grass, Slow on brush when the grass is thick but if the grass is lacking anything is eaten, except my menace wild Mint. They do love poison ivy/oak as much as grass.

Now have some stupid little dog with no dog manners come bite him. Had family come with a Golden and a Chihuahua (stupid one at that) Golden had rib bone, little dog tried to take it, snap, broken headed little dog doing the death flop. Mind you they both belonged to the same person. I had some...

I love my dogs --- at home. Never felt a need to take them anywhere unless they are reason to go, like the Vet. Having people camping with dogs could get interesting.

Does it creep in one direction or the other by itself? I would be suspicious of maybe the seat switch or HST neutral switch

Are you jamming on the brake while still standing on the HST pedal? I rarely use the brake just use the HST to slow or stop, brake only when holding position on steep hill or inching nose down into really steep place. My little BX used to almost throw you onto the hood if you let of the HST...

I quit the rescue part (not knocking it) long ago. I like to raise them with the problem I cause not someone else. 🤣 Mine are part of the family and know it. Do like the Pump with an 8 round tube when in doubt. I'm far from populated areas ;)

Just watch my wife's self appointed guardian position herself when there are strangers about......

One dog sure, have 6 from 85 to 150 go full-hostile and the odds change. Even the goofball that likes everyone and everything has that mode. Besides they are more for the winged and 4 legged intruder, I have the honor of dealing with the 2 legged ones. Where I live labs can be a meal for some...

Old eyes... 5

The float detent assembly would be under #6. The longest cap. It will have spring(s) and detent balls in the assy. Careful when you pop it off, small things try to escape.

Everything breaks and given enough time/money it can be fixed. I hope the machine continuous to serve you well.

Looks these folks might be able to help, at least a starting place. 4336733ASSYCT

Says it was a factory option TractorData.com Deutz-Allis 6260 tractor information

Like that on my LS, sure seems like a long timer in the ECM code. However it does keep you from entering that mode by accident.

(y) (y) (y)

Don't hold your breath on that one. Then again she don't ***** when wet dogs or muddy boots come in the house. (y)

Worth shot before the dealer route. My LS did take holding it what felt like a long time, The other stuff is required, brake neutral and running,

All conditions must be true, and if like my LS you have to hold the button until starts 10+ seconds.

I should hire someone to help complete some projects but then where would the sense of accomplishment come from? I reckon once the weather improves I'll get on top of some.

You may well be right. Tech dies on the vine all the time. The big problem is energy/heat absorption by wet wood. Much easier if it is dry as we all know from fire wood.

A few years ago laser welding was like that, look where it is today. I said it's coming, may never replace climbing or lifts completely, Also not sure battery saws will be a complete answer. IMHO

That vid has issues but the product is coming How Much Does Laser Tree Trimmer Cost | Laser to Cut Tree Branches Sell Your Tree & Forestry Equipment Online │ treeandforestry.com

By bar size and mount. The different mounts, chain width, etc. If the specs match you are mostly good. Here is a primer https://www.lawnmowerpros.com/chainsaw/chainsaw-guide-bar-mount-chart.asp?srsltid=AfmBOorFOPgyoYeuyor-vlkbJ9IsjkBlMVE3ow1fsgAaQf_jRl2FBHuh

FedEx policy here is a picture if the drop it, a signature if they hand it to a person. Not all drivers follow protocol.

🤣I dump at least 4 to 6 of the big coffee cans (1 1/2 pound or so) into 3 bowls for our pack. They share those and eat when they can depending on status and what they want. Puppies are slowing down at a year old. They were good for 4 cans by themselves during the latest growing phase. No one...

Not uncommon.... with GP

Offered someone down on their luck a wild hog, dead and gutted but needed processing. Wanted me to cut and wrap just the back strap. Guess they found something else to eat, no more help from me.

I am, when cold you let the motor rev some to get the heat going.

My BX replaced a riding mower 20 odd years ago. 4500+ working hours later I have never regretted that move. Added a bigger machine to give the little feller a break a couple of years ago. Still use it almost daily, well I have flat right now and too cold to fix Just the effort saved with the...

Tractor supply sells and I think refills bottles. Worth a shot

Yup and they may have below 10 F once a decade of less. Code and procedures are way different. Many houses are up on stilts and not on or in the ground. Many old houses in the south have little to no insulation.

You forgot FedEX Express another one running their own deliveries.

Try this link then..... works for me with no login LSMtron Web Parts Catalog

Try http://lspo.lsmtron.com/PartsList/wpc2000_MAIN.aspx

That is a lot of Climate Change for the Gulf Coast 🤣

I'm pretty sure they deliver to any street address just as well as USPS. They don't do PO boxes (I could be wrong) . Heck UPS was delivering when USPS and FEDEX said the roads were bad. I just expect they want more than USPS to deliver Amazon Prime

I see FedEx, UPS and USPS almost daily

You must get Amazon deliveries, just USPS for us hillbillies. Amazon does drop it at the local post office in Cuba so it does avoid the 5-30 day delay in KC.

Some of us were born in the wrong century.....

Heck here they get lost with GPS...

My mom moved to Bend from the LA area now considering coming to the south. Brother is in Huntsville and we are way to remote for her taste. Like I said not for everyone.

GEO BEET Tire Ballast • liquid beet juice

It was bridge to far for me personally many years ago. After being stationed in the Carolinas and moving back to greater LA, I knew I had to get out. Lived in NC/SC for 18 years and learned something remote living. Now I'm in MO Ozarks by choice. Not for everyone, the fewer the better :geek:

Mostly you will have a long gravel road leading to the place. Not many paved roads out here except state hyw. Edit: what do you know it is off a paved road.

Just lean on the horn,,,,,

I have 92 ac with a 12 ac pond, and 50+ rv spot, 5 rentals home when I bought the place (only have the ones by kids live in now) , residence (nothing to write home for), shower houses, pavilion, shop and barn. Have way under 500k in it, 2K taxes. Roads, real water and sewer systems included...

Well you in the middle of no where and an hour from a Walmart. However taxes on that are ~3500 per year so not too bad.

Around here a million will buy a serious spread. https://www.realtor.com/realestateandhomes-detail/4071-Highway-106_Ellington_MO_63638_M74092-00046?from=srp-list-card $999,000 4bed 4.5bath 6,118 square feet 102.5 acre lot And lot more....

I like the idea of not having payments, just the 2K or so annual government extortion. Made it possible to shut down the business and retire away from people. Now I'm on my own schedule.

I paid off my mortgage around that time ;) Happy Day....

Mostly oil based pleather anyway.

Here is the LS parts site may be helpful Welcome!! LSMtron Web Parts Catalog

My LS HST never had one and the one on the Kubota was jumpered some time 17-18 years ago.

Just personal use, never have sold anything other than live animals and will keep it that way. One or 2 steers per year for us and kids living on premise. I do not want to complicate my life :giggle:

Many of those vets don't like my dogs and the barn cats either. 🤣

We do all of our own processing of beef, not that much harder than venison, at least for personal use. We did struggle a bit with a Dexter/Angus cross that was well over 1100#, mostly our steers are 5-700 and manageable to process for us. I have not found a large animal vet that does farm...

We have 8 on the ground now and it is tapering off.

We have an even dozen now, all black except my brown lead cow. Kept the last 2 heifers out of our first bull (now deceased) and bought a slightly smaller registered bull calf. He is just over a year old now and still fighting his way up the ladder with the older steers. If things work we should...

I went the Dexter route, smaller and easy keepers, Will eat almost everything a goat would. Not too expensive if you do not buy pedigree. 6-12 month heifer go for 500-1000, bulls 600-1100. I did buy a bull with long pedigree but got a bargain (600 delivered) because the couple was down sizing...

Just note that many of the NH tractors are LS with NH paint and badge. I just see that the long time NH dealers have dollars and space to stock parts where as the majority of the LS dealers are small, new and do not have the funds to sit on a large parts inventory. Then they want to much and it...

Our Brute Force is like that you have to keep the engine RPM above 1500 to have braking. If the centrifugal clutch disengages you free wheel down the hill

And the people act like it.... 🙃 I made sure the water tower was full, hay by the cattle and wood rack by the house was topped off. We'll see what challenges the morning brings.

Trade you the snow for Ice we are supposed to get here in the Ozarks. :giggle:

There are 153 replacement oil filters for HIFI-FILTER T501 Oil filter cross reference

My Condolences and best wishes. Hang in there.

Cool, learned something. 😊

I'm a Husky guy but ran across this just now, is that a real thing? Summer - Winter mode on a Stihl?

I have 6 LDG and a tiny mutt, the 5 older ones are good to go. The puppies at 11 months are still working on their brains (LDGs come with a primitive OS until the brains comes in at age 2 to 4). They know their role at 11 months as well as expected. The beagle knows what to do but has less self...

He is my adult son's dog but I have him during the work day. He supposed to run with the LDG but either leads the puppies astray or off by himself, they have a 90 acres of ours and a several hundred of wilderness to roam. He can be in woods in a second and out of sight. So far he's been been...

Most of them have been the dog I needed not the dog I wanted at that time. Each taught me lessons I had to learn. Now to figure out what I'm supposed to learn from the Beagle/Border Collie that adopted himself into the household..... So far besides anger and frustration (sure that is not the...

I really need to avoid this thread......

I dreamed of snakes crawling into various body orifices all night...... not very restful. Thanks guys.

Pure evil..... of course I'm the dude that cut out some weird looking growth in my thigh. I had accidentally removed a 6"x10" (or so) chunk up to 2" deep of muscle when I removed some cinder block for a retaining wall by smashing myself into at high speed after I left seat of bike during street...

That's it, i might have to start drinking again tonight. SMH I've seen enough of my insides in real time, really don't want slow motion replays.

Darn you now I'll have bad dreams.... Scopes being roto rootered up my..... :rolleyes:

That at least does not sound like roto rooter up the tube..... or elicit that image in my brain:giggle:

THAT is a description that will keep my butt cheeks clenched most of the day.......😟

I've dug stuff out of my scrap bin hours after throwing it out...

Sorry forgot where we were. Carry on... not my intent.

No worries it will still be argued and litigated long after are all dead and buried.....;)

Feds have NO constitutional right to infringe but yet here we are. States may or may not have a right depending how you interpret the US constitution. If it is the supreme law then no US government has any right to infringe on the citizens right to keep and bear arms.

It's a conversation starter....:p

Make that at least 60 miles here.... If I don't have it, I wind up waiting for it to be shipped in unless I'm desperate.

(y) (y) (y) :) CCW holders have a lower crime rate than Law Enforcement personnel, let that sink in.

MO does not require a permit but they are available so you can carry in other states that accept a MO permit.

Ya Think.....

Glad to see I'm not the only one to hang from the loader. I use a hay spear with a square tube to get the steers away from the front of the tractor a bit.

Try this one. By-Passing Seat Safety Switch On MT342

Link to manual in this thread Wiring diagrams for LS XG 3135H and others are in this thread.

I've been telling this story for a year or more on here but no... I'm crazy. The Nuland phone recording was telling way back when.

He does decent job cliff noting the Ukraine war from back in day. Not perfect but he does hit the high notes and you can validate everything and get the full details.

Hope it all gets sorted. Prayers and best wishes.

And here I have pick up my 150# girl and wrestle her into the truck, while she does everything to escape. I do like my GP and Anatolians, but car riders they are not, but will go on a long run with ATVs or on their own.

HST speed is controlled by how hard you press the go pedal up to what the engine speed can deliver. More RPM more hydraulic flow to drive the HST unit giving more top speed. I guess I'm saying the HST is a function of hydraulic flow and pressure not engine speed like a manual gear. The engine...

There is a neutral, at one point the safety switches made you be there in order to start. 2nd switch I bypassed :cool:

Sound like the Swash plate inside the HST is not moving. The linkage ends with pin 230 in item 220 Trunion arm on this page. If the pin is sheared or missing he shaft into the HST will not move, no motion of the tractor if that shaft is not turning. Kubota BX25 Parts Diagrams BTW there is a...

I would suspect the item 160 (rod) became disconnected at either end. Kubota BX25 Parts Diagrams or the pin where it controls the swash plate at the HST unit.

It was Biden tariff so it was good and did not affect things. 100% tariff on Chinese BEV in early 2024

All my cattle have names and know their name when called. Toro is going freezer camp this fall. Next will be Anise and so on. They have the best life I can give them before they help sustain ours.

That is what I read the first time. Why would the county LE be involved in a civil matter.

I thrive on a challenges and Elm like that will make you earn it at times. I hate when I have to give up on one, but then it goes to the firepit to enjoy outside.

Didn't Gale just accomplish that as well ;) Deer can appear out of nowhere and then stuff happens. I had 2 in the pasture this morning and 7 in woods of the bottom pasture. That time of year.

Yup fixed the overheating Dakota rusted out thermostat and gunk in the Rad. Cools fine now however now the alternator refuses to generate anything. Drove it back to the my shop and will deal with it after the rain. Some days I back up faster than fix things, going to reinstall the recoil on the...

Yeah. Dakota overheated on the wife.... top of rad hot bottom cold. I'd say thermostat, water pump or clogged rad. Joy guess the wood splitter will wait.... Too hot to work on it until after dark so not happening. Got a spare rad (in a Durango of that vintage.) and Thermostat. That should...

I was down to a single project ATV (bought cheap will take some work) and rigging up a hood latch for the BX. That was a week ago. Since then youngest hit a deer, damage mostly fixed, now that car is missing on 4 out 6 cylinders. So I had to un mothball the 1997 Dakota that has not been run in...

Having been pretty high on the support food chain, once you ask for help-- Do everything ask again not matter how often you have checked before. Every tech has a method and depends on honest answers throughout. There is no shame in finding you missed a basic step or error. When you short cut or...

Posting this one for Gator he likes AI to fact check

Happy your ok and were able to drive home.

Make that 6 am, dogs don't know I'm retired

Best to use your own child..... but otherwise it works.

Daylight saving time in the U.S. In the United States, daylight saving time was first used in 1918, when a bill introduced the idea of a seasonal time shift. It lasted seven months before the bill was repealed. During World War II, President Franklin Roosevelt re-established the idea of...

I do that now. I never change clocks away from the DST and just do the math if for some odd reason time matters. I do get confused when I computer is an hour off all winter long.

A longer look at VW XL1

VW claims 300 mpg or 100k per liter in 2014

Works on the XG, I put a toggle switch to bypass as needed. Helps to move the tractor from the ground to remove/install backhoe or cutter.

You are sharping the wrong side of the tooth, I bet it would work once or twice then you are back to sharping the tooth correctly from the inside. YMMV

I have a bunch or 10 MPH speed limit signs in the shop, now I have ideas :cool:

Hersey can't compare to German or Swiss or even Belgian....

I know Snyder's and Hersey. Like the pretzles, some Hersey stuff is good. Starbuck is not good coffee IMHO and I don't do froofroo coffee. Seen UTZ never tried it, the rest not a clue and I used go to Allentown several times a year for a couple of decades.

Top of the list right now. The ones that want to only text are off limits as are ones that require a cell phone. I have no cell service nor do want one. Yes I could do wifi calling but the land works without electricity ;)

Makes really good starter wood, put over kindling and if dry it will catch fast then add the good wood.

Power co just took down a 40" diameter pine that showed signs of decay after 60 years of trimming the line side. Never would hit the line but crush a building or 2. They brought it down and I got the mess. Fair trade in my book

True... some are twisted to no end. You'll find some good sections in a big tree but anywhere near a knot it can get ugly.

I'm an avid hunter but but have never hit a deer with a vehicle, couple of dogs and lots of other critters. Maybe be because I'm always looking for deer at the edges 🤣

(y) I get a huge volume of leaves and stuff from the hills all around. Nothing but trees as far as you can see....

How many leaves and debris will come to your drain? Does not take a lot to clog a 6" line. Heck even 18" clog regular around these part.

Always played that on the way to the In Laws feast. Not Thanksgiving until it is done

By whom is the question, I am partial to the Chuck Berry original. Seems like everyone recorded that song.

That's a beast to start with, I had my boy learn on a old Craftsman with 12-14" bar then let him try the Poulan with 18". He's 36 now and still rather not play with the 70cc class.

Big difference between helping to buck and dropping trees. My boy has been helping to put in wood since he was 8. Unsupervised is a whole different matter, he also started driving the mower at around 8. Both of my kids were driving a truck for slow speed chores by 11 like collecting garbage...

Or maybe they teach their kids to succeed by challenging them. Sure this is too dangerous for you

Fuel shut off solenoid hanging open? https://www.weingartz.com/assembly-diagram/john-deere-parts-lookup/model-855-856-are-common-unless-otherwise-stated-pc2054-governor-linkage-fuel-shutoff-solenoid-linkage-855-fuel-and-air/4275-35258-528109

You waited for 27 people to buy something? Dang I won't stay in the DMV if there is more than one ahead of me. :rolleyes: :oops: ;)

Yeah it does take some practice but there are lot of wild eatables that I enjoy. It is not something you learn overnight.

I use my hay spears as sawhorses frequently.

Many that forage are willing to share their limited knowledge. For most of us that means we know some of the things in our area/property and are learning more every year. I would be mostly starting over in a different area.

EP 00 refers to the NLGI viscocity grade (EP=extreme pressure, the numbers refer to its relative viscocity, eg. EP 00, EP 0, EP 1, EP 2, etc. The higher the number the higher the viscocity) An EP 00 is a very light semi-fluid grease. A lot of blenders will make some greases in that viscocity...

Google shows it all over EP 00 - Google Search Walmart EP 00

My LS tractor is all metric EXCEPT the oil filter that uses an imperial thread not metric. Go figure.....

My wife is the plant guru but .. Autumn Olive Jam and Why You Should Make It Autumn Olive Jam There are more recipes on line to get you started. The small berries (like wild black cherry) are labor intensive but may just be worth the effort for a unique treat Mulit-flora is just a native rose...

True but being a MOPAR guy, I have my share of vehicles that use a mixture of fasteners, and it's not consistent per model. I'm used to it and use what ever fits best. :cool:

That would be my course of action but tire shops (except AG shops maybe) won't do it in the US

Few if any tire shops will repair sidewall damage in the US. Now if you go any third world country you can get fixed in a day.

Yeah they could change to what ever standard and I would still need every type to work on the old stuff. Good machines are around a long time.

Yeah, anytime you try something take bit and see how you react. Some things are not compatible with your gut at first try, others may never agree with your system. Mushrooms take some knowledge some like Morels and Chanterelles are pretty easy to identify. Others like Chicken of Woods, Maitake...

I'm in south central MO with a 12+ acre pond that has almost 1000 acres of watershed most hills and trees. Been so dry here we are down over 3 ft but a 5-6" rain would fill it most of the way. MO is like that some years we go down several feet and other years I goes over the emergency spillway...

Pretty much every 12v system I have checked runs above 13v when the alternator is functioning correctly. Most are 14+ at operating speed, so plenty of voltage to charge either battery. I have used AGM in everything from ATV, tractors, cars and rvs. Never noticed a problem. My ancient Honda ATV...

Elderberry - cough syrup Wild Black Cherry - the best jelly YMMV Autumn Olive - Jelly WIld Plum - Jelly Rose hips - Medicinal Willow bark - Pain tincture Wild grapes - Jelly Wild blackberry, black raspberry - table treats and jelly Mushrooms - Morel, Chanterelles, Chicken of the Woods, and...

Bet a clog there makes a mess. I've got my share of trouble spots.

Took me sec because that is what I do.... put the can on the seat and siphon until it mostly empty. The put that last gallon or so into the BX.

The act of digging is helpful. I won't turn down the backhoe that way they get a place on on the ridge overlooking their domain under the trees. I stop by most days. Gone but not forgotten

Suppressed 22 subsonic is scary quiet..... Here it don't matter, was out bow hunting last night and one of the neighbors was sighting in a selection of rifles, including a couple of cannons I think :) Way more than 30-06

~$30 for a box of 500 22LR should be plenty.

Never know the dog you need is often better than the dog you want. Often they have found me not the other way around.

The one in town closed about 6 years ago. Owner kept the name long after there was no more Western Auto until he was forced into retirement.

As a ticket collector in my youth that was the lesson I passed to my kids. The side of the road is not the place to argue with a cop. Pleasant conversation may get you a lesser charge or warning. Being difficult and unpleasant will not help. If the cop was wrong you go to court and win or the...

Feel for you, my old guy is pushing 13 and as a giant he is past life expectancy. He is all there mentally but the body is used up (I can commiserate), needs help on steps and getting on stuff. Falls when he is not concentrating. Can't run, rear legs give out and he drags himself to get to the...

Living in terrain similar (not as extreme) as the Blue Ridge. When the creeks destroy roads it not a matter of rebuilding the road, it matter of creating enough flattish ground to build a road. The sides of the hills become vertical (near enough anyway) and just fill will not fix the problem for...

This covers it....

Engine Speed Control. Lets you set a RPM and always go to that when you enable the switch. Let me see if I can find the description again, not intuitive to set but then works well.

Let me see you get two 6'4 and 300 lbs guys or better in there, even better if a cooler and some rifles fit as well.... That it is a nice ride but not many bubbas will fit.

Seen one here and had tracks consistently for a couple of years at a wild life pond. More often than bear tracks that we do have officially.

Mine has a key in it, that way I don't loose it.

When it does go sideways...

Proto 1970's a little heavier than Snapon and lighter than Craftsman. Priced in between before Snapon became crazy. Picked up a bunch at garage sales, etc in HS. Back in the days of no money and broke vehicles, back to that right now. Still have most of the good tools from back in day.

I had sears replace 6 one inch sockets one day. 6 foot cheater on 1" drive breaker bar, with two 250 pound guys jumping on the pipe from a ladder. That damn nut came off late that day.

I have some el cheapo that now fit the next size up.... but they had a 3' pipe and 16 pound maul applied. My proto took that abuse, snap on & craftman just get a new one at the dealer.

I'll add that a lot of cheap open end wrenches will spread the jaws when you use a dead blow or hammer. Never managed to spread a good wrench but we tend to use the the cheap throw away ones when abuse is about to occur. :)

Might be Loncin Loncin is a Chinese company that manufactures small engines, and is known for their quality, reliability, and value. Loncin Motor Co. Ltd. has been in business since 1993 There are many small engine OEMs in China and many well known old companies that have factories in China.

Our goal was always to homestead and live disconnected. It real now and I see no end to things I want/need to do. Good thing I enjoy being outside, tractoring, etc. I figure I got another 10 years of real work in me. Maybe I'll be closer to done by then :p

The manual does confirm that the Workmaster 35 -40 is the same as the XG 3135 -40. I did not see the error codes in the last manual but the Workmaster manual has them. Pretty sure I'm covered as needed. Thanks again

My Hero :love: Thank you for sharing.

I hope it works out, it way better than nothing. If you guys do run into a XG service manual, remember me. :) I've never had too much tech info.

The workmaster is the LS XG/XR tractor minus a few standard features that are options on the Workmaster. NH uses a different loader (I think) and a different shade of blue. If you add MT to front of an LS part number you have the NH number. The MT2 35 and MT2 40 is the next generation of the XG...

I think yellow is just choice, I know you can order almost any type in a variety of colors. Captain O-Ring LLC - O-Rings, Custom O-Rings, Color O-Rings or The O-Ring Store LLC, We make getting O-Rings easy!

Wagons not trailers..... Pretty sure there are many (some not even overweight unlike me) that better never use the bump step on that hitch.

I can offer some manuals that I use for mine.... MT240 and Workmaster 35 manuals in one zip. Link will only active for a few days because I'm dropping that server when the bill come due again. https://gerrysweb.com/Manuals/LS-XG3135H.zip

🤣🤣🤣 Must be nice, I have Four 4 foot culverts under my driveway and at times they are unable to handle the flow until it lets up. I have an additional 2+ ac pond until the pipes catch up.

TMI, but now you got me thinking...

Straight pin to fit the eye and your post. I opted to convert to heim type joints and it works well so far.

If you know what you need Midwest Control Products might just have it for you. I rebuild my BH controls with parts from there.

Or just leave it another will along shortly to build there again.

Gooseneck would take a jolt to jump off (like going up steep bumpy hill) and is unlikely to happen in slow transport. Kingpin will slide out almost as soon as you start in most cases if not locked in. I've seen both types loose a unit going up a hill on the way out of here. Gooseneck was never...