Front PTO drive

   / Front PTO drive #1  

Honaw

New member
Joined
Feb 5, 2025
Messages
3
Location
Newmarket ON Canada
Tractor
Deutz 6260
I have a Deutz 6260 tractor that has a front pro drive box. The gears in the box are damaged and Im wondering if anyone would have any idea who manufactured this PTO drive, or where I can get any parts ie gears for this unit. There are no names or logos stamped on the box except the numbers 002758. Photo attachedView attachment 2606027

IMG_9255.jpeg
 
   / Front PTO drive #2  
I would start looking on the web for parts tractors, that front PTO may have been an option that was not common.
 
   / Front PTO drive #4  
Looks these folks might be able to help, at least a starting place.
4336733ASSYCT
 
   / Front PTO drive
  • Thread Starter
#6  
Thanks for your suggestions. followed up but no luck so far.
The bearings went month ago and I was able to find some to fit.
Now the gears broke some of their teeth & froze up the whole thing.
I just found a machine shop near me who will make me a couple new gears, unfortunately I think that’s the only option left.
Love my tractor it’s like a tank, saved me lots headaches over the 30 years I’ve had it. I sure subscribe to the - take care of your equipment and it will take care of you- Once again, I appreciated your suggestions. Take care!
 
   / Front PTO drive #7  
Thanks for your suggestions. followed up but no luck so far.
The bearings went month ago and I was able to find some to fit.
Now the gears broke some of their teeth & froze up the whole thing.
I just found a machine shop near me who will make me a couple new gears, unfortunately I think that’s the only option left.
Love my tractor it’s like a tank, saved me lots headaches over the 30 years I’ve had it. I sure subscribe to the - take care of your equipment and it will take care of you- Once again, I appreciated your suggestions. Take care!
Everything breaks and given enough time/money it can be fixed. I hope the machine continuous to serve you well.
 
   / Front PTO drive #8  
Thanks for your suggestions. followed up but no luck so far.
The bearings went month ago and I was able to find some to fit.
Now the gears broke some of their teeth & froze up the whole thing.
I just found a machine shop near me who will make me a couple new gears, unfortunately I think that’s the only option left.
Love my tractor it’s like a tank, saved me lots headaches over the 30 years I’ve had it. I sure subscribe to the - take care of your equipment and it will take care of you- Once again, I appreciated your suggestions. Take care!
Any chance of getting some "off the shelf" gears and then just have a machinist handle the bore? Should bring the cost down some, hopefully.

Seals and bearings should be able to be found easily on any bearing suppliers or similar.
 

Tractor & Equipment Auctions

PARKER 25 T/A GOOSENECK TRAILER (A45046)
PARKER 25 T/A...
2063 (A46502)
2063 (A46502)
2030 (A49339)
2030 (A49339)
Kubota BV4160 (A47307)
Kubota BV4160 (A47307)
3080 (A49339)
3080 (A49339)
2019 ISUZU (A46683)
2019 ISUZU (A46683)
 
Top