Search results

Yes. The Kubota Super-techs who drive a circuit aiding local dealer mechanics mystified with a Kubota tractor problem are expensive to schedule efficiently and expensive to keep on the road five days per week.

Your right side tires, front and back, have to move freely through the last plow furrow created. If your plow is 12" wide, producing a 12" wide furrow, but your rear tires are 15"+ wide, forget a consistent result. (I speculate this is your problem.) If your plow is 14" wide, producing a 14"...

I speculate that Kubota's 0% financing marketing has carried them to as high a USA market penetration as possible, even if Kubota can borrow at 2% - 3% interest rates in Japan. Certainly Kubota lost market share during Covid, when Kubota USA could not produce sufficient Loaders and Backhoes...

More probably TYM footsteps.

2023 PERSPECTIVE

Nothing to be done except to move up to a heavier tractor with a greater flow pump. If you install a greater flow hydraulic pump on your SUBCOMPACT tractor, engine power will be diverted to the new pump. Additional pressure on existing lines may cause catastrophic hose failures, certainly...

LS MT122 2016 - MT1 Series Sub-Compact Utility tractor Hydraulics Pump flow: 4.6 gpm 17.4 lpm Total flow: 6.7 gpm 25.4 lpm Steering flow: 2.1 gpm Dimensions Wheelbase: 56 inches 142 cm Length: 97 inches 246 cm Width: 47 inches 119 cm Weight: 1433 lbs 650 kg

No.

I have tried to connect an implement to the tractor PTO for the first time. I could not get the attachment to slide onto the PTO. I think it is a subtle alignment issue between the female splines of the implement and the male splines of the tractor PTO. New PTO powered implements, connecting...

You could also consider a Ratchet Rake toothbar. https://www.tractorbynet.com/forums/threads/ratchet-rake-scraping-up-around-flatwoods-plum-tree-florida.273648/ DIRECT VENDER: https://www.ratchetrake.com 684420,687398

TPH mounted vine hoes are common in California and Washington. A "trigger" swings the hoe away from the vine on contact. With some on-line research and maybe a few phone calls you should be able to order one. Our vine hoes were operated behind Loaderless, low ground clearance 100-hp Deere...

2) with this cut Sorghum-Sudan seed, when I try to plow grass builds up a large plug on my plow. Do I need to move my coulters back or sharpen them? You should not attempt to plow grass. The field should be mowed as short as possible before being plowed. You should plow stubble, not grass...

Plowing techniques: https://www.tractorbynet.com/forums/threads/moldboard-plow-wisdom-from-farmwithjunk.308006/

The draft control does not work on my tractor. The sensitivity of your Draft Control is adjusted by the pin position of the INBOARD end of your Three Point Hitch Top Link. Repositioning where your Top Link is pinned to the tractor may restore ((increase the sensitivity)) of Draft Control...

Massey Ferguson 451 2002 - 2006 400 Series Utility tractor Production Manufacturer: Massey Ferguson Type: Utility tractor Factory: Brazil Massey Ferguson 451 Weight 2WD Shipping: 4,738 lbs 2149 kg

For a 2-WD tractor to pull a 2-Bottom turning plow it is essential that the rear two tires be 3/4 filled with liquid, usually termed tire ballast, for traction. Are your rear two tires filled with liquid? It is also quite helpful if the 2-WD tractor is equipped with R1/agricultural tires, which...

Quite a few 9.5-15 tractor tires available on eBay. I see Firestone, BKT and Carlisles. Most would order R4/industrial tires, which are always a minimum of 6-ply construction, for a tractor optioned with a Loader. I order 10-ply front tires and 6-ply rear tires. I HATE PUNCTURE DOWN TIME...

Small wheels on a subcompact size BX are like lower gearing in a truck, relative to larger wheels on a compact tractor Cab + A/C is a 600 pound burden on a moderately powered tractor. Kioti CX2510 HST Cab quickly loses power and wants to stall on slight hills. NORMAL

Really?

I have never broken a tire bead on any of my three tractors when tire pressures were maintained at tire manufacture's suggested pressures. I have air in all tractor tires.

Fred Cain, Dirt Dog and Bush Hog APPs are identical except for paint colors. Everything Attachments no longer markets the Fred Cain proprietary brand. Sad.

Describe your soil. It's mostly clay and scattered flat rocks. I'm guessing the perfecta wouldnt accomplish that in my clay based soil? A spring-protected All Purpose Plow like the Dirt Dog brand or very, very similar Bush Hog brand APP will penetrate and fissure optimally moist soil 10" - 12"...

Long time lurker working toward purchasing my first tractor. I've got 10 acres about 60% dense wooded, rocky, hilly and 40% cleared yard/fields. I recommend any brand of 4-WD tractor of 3,700 to 4,200 pounds bare tractor weight. Sufficient tractor weight is more important for most tractor...

Four (4) foot to Forty (40) foot width Tiller Options: https://nwtiller.com

A Field Cultivator without a rear basket does not fluff soil at all. Example: Dirt Dog APP. Fissures allow rain to carry nutrients down, with decreasing amounts carried down at over 6" depth. A Field Cultivator with a rear basket, like the Perfecta, will fluff your soil a little. Look at...

For 1-1/2 acres of sloped land, I would be concerned with potential rain erosion. Has erosion been a factor in the past? Consider some form of Conservation Plow: https://www.tractorbynet.com/forums/threads/dirt-dog-all-purpose-plow-field-cultivator-review-pictures.339095/ With extensions...

New Holland TN75 1999 - 2003 TN Series Utility tractor Production Manufacturer: New Holland Type: Utility tractor Factory: Jesi, Italy TN75S: Super Steer New Holland TN75 Weight SuperSteer ROPS Shipping: 5370 lbs 2435 kg New Holland TN75 Power Engine (gross)...

How many acres do you need to cultivate? Will you grow a market crop or is this for food plots on hunting land? Is your land flat, sloped or mixed? How much of each category? Describe your soil.

Fuel starvation due to dirty fuel filter. While the tractor sits, fuel gradually trickles in to fill the fuel lines. Under load the fuel in the fuel lines is used up and the tractor stops from fuel starvation.

Branson 3520R Four-wheel drive Weight 4053 lbs 1838 kg Branson 3520R Power Engine 35 hp 26.1 kW PTO (claimed) 29 hp 21.6 kW Width 64 inches (min) 162 cm

York brand, Model RI landscape rake with fold up/down blade. Expensive, but 2 in 1 versatility. Worth it. RI RAKE SPECS: https://www.yorkmodern.com/downloads/RI%20LandscapeHeavy.pdf I would favor 7' width as rakes are mostly pulled on an angle and 7' will reach the edge of your driveway...

Give us the specs for the Kubota. The capability of an 1,700 subcompact, 2,000 pound compact and 2,700 pound compact tractor with 25-horsepower vary proportionately to tractor bare weight. Is the tractor 2-WD or 4-WD? For breaking 0.1147842 acre a one bottom plow is ample for a...

5,000 square feet = 0.1147842 acre Soy Beans, a nitrogen fixing legume, are a good warm weather green manure if you can keep hungry deer out.

http://www.buctraco.com/9%20Online%20Catalog%20Garden%20Series/GardenSeriesIntroduction.htm https://www.lsuagcenter.com/~/media/system/e/6/6/e/e66ed13be4f5a5216aa214276e14dacb/pub2917tractorimplements1.pdf

You keep feeding us these generalities..... What is the Kubota model, which will tell us the tractor weight, which along with information on whether the tractor is 2-WD or 4-WD will tell us what size disk the tractor can pull. No 25-hp tractor has sufficient weight to pull a disk harrow that...

You can "turn" a pasture into a garden using mechanical means without herbicides. You can grow perennial crops organically, without synthetic herbicides. (I farmed 200 acres of organically grown wine grapes in California.) However, gardens are almost always annual plants such as tomatoes...

Congratulations on the new machine.

I suggest you revise your T-B-N PROFILE, eliminating Ford 3000, replacing the Ford with Kubota and the correct Kubota model designation, L2850. Now I have a Kubota I know almost nothing about. Here are the basic specifications for your Kubota L2850...

That is because Kubota lets Loaders and Backhoes out of the assembly plants in Georgia with (speculation) +/- 10% pressure variation. (20% variation from low to high.) The dealers are supposed to check Loader pressure during their assembly of major components but often do not. If the...

First be sure your tractor is lifting to its full spec. Loader pressure test gauge site:tractorbynet.com The potential you read in your manual in theory may not be true of your Loader in reality. T-B-N ARCHIVE: increasing kubota b fel loader lift capacity kubota b2650 loader lift capacity...

tractor ground pto This is very unclear to me. Please clarify. WHERE ARE YOU LOCATED?

Is there some reason you do not wish to order a MF CB85 factory Backhoe from your MF dealer? It is highly probable the factory Backhoe will fit properly and not encounter interference with your MF frame. MORE: aftermarket Backhoe site:tractorbynet.com Probably a $7,000 outlay. Are Backhoes...

Massey Ferguson 2860M Attachments Backhoe type:Massey Ferguson CB85 Backhoe Transport height:87 inches 220 cm Digging depth:100 inches 254 cm Reach from pivot:130 inches 330 cm Loading height:76 inches 193 cm Bucket Rotation:180 Swing Arc:175 Bucket force:4072 lbs 1847 kg Dipperstick force:2621...

Regeneration is an infrequent DPF event with my Kubota three cylinder, 37-horsepower engine. Generally once every sixty engine hours. (Very consistent in Florida due to warm weather.) 60 hours X 60 minutes = 3,600 minutes. 16 regeneration minutes /3,600 = .00444 = 4/10s of 1% of engine time is...

Diesel exhaust fluid Wikipedia https://en.wikipedia.org › wiki › Diesel_exhaust_fluid Diesel exhaust fluid (DEF; also known as AUS 32 and marketed as AdBlue) is a liquid used to reduce the amount of air pollution created by a diesel engine generating 75-horsepower or more. DIESEL...

Can My Tractor Pull XXX Tandem Disk Harrow?? Tractor factors in descending importance: 1. Tractor weight ((traction)) 2: 2-WD or 4-WD tractor power transfer to ground ((traction)) 3. Tractor tires in relation to vegetation and soil ((traction)) tire tread rear tires inflated with air or...

the high gears have no power, any small incline will stall the engine. When I use low gears it has all kinds of power. The higher gears are not for use on hills. Higher gears are for RELAVATIVELY rapid travel over level ground. I have no experience with Jinma tractors. From my experience...

For Deere or Kubota $40,000 is insufficient budget for a NEW tractor with your specifications, above. $55,000 to $60,000 is realistic for Deere or Kubota 60 horsepower, cab/ac, mfd, loader, shuttle, tractor in most states. Once diesel engine generates or exceeds 75-horsepower you have to deal...

https://www.tractorbynet.com/forums/threads/bucket-spade-today-fel-bucket-attachment.328798/ GOOGLE SEARCH: tractor bucket spade

.......Just the suggestion I was going to make. I have turned the pins in on a Kubota BX to make implements fit the 20" wide hitch. Three-point hitch specifications Category Hitch pin size Lower hitch spacing Tractor drawbar power upper link lower links 0 17 mm...

Trractordata.com has no listing for the MT-750D. This likely means it is a grey market import, if your are in the USA. Consider a Three Point Hitch transport box:

Scotland is a wet part of the UK. Tall R1/agricultural tires will give your tractor the best traction running over moist / wet soil. R1 tires are almost always the choice for 2-WD tractors. R1 tires are almost always 4-ply. The flexibility of 4-ply construction improves traction. R1 tires...

T-B-N ARCHIVE: Watch YouTube Videos half way down thread. https://www.tractorbynet.com/forums/threads/3-holes-for-top-link-on-tractor-end.464093/

The mower's Thee Point Hitch tower is bolted together. This assembly method gives a little frame adjustment. May surre the bolts and nuts are tight, so the frame does not flex.

I ran an 18" bar on my MS261. I am not quite as meticulous about chain sharpening as Jrasband. Great saw!

Scotland is a wet part of the UK. Tall R1/agricultural tires will give your tractor the best traction running over moist / wet soil. R1 tires are almost always 4-ply. The flexibility of 4-ply construction improves traction. R1 tires are the least desirable tire to run over the road. R1...

This currently running thread will answer many of your questions: https://www.tractorbynet.com/forums/threads/newbie-trying-to-nail-down-type-brands.470866/

If you follow this T-B-N =TRACTORS FOR SALE= forum, you may eventually get a lead on a good, value priced, subcompact tractor near your home: https://www.tractorbynet.com/forums/tractors-for-sale/ If you post your location, at least your state, but preferably city and state, a T-B-N...

Is there something heavier duty than just a riding mower that isn't a full blown farm tractor that has 4wd capabilities & can tow wood/rocks etc? Yes. This category of tractor is a subcompact tractor or the lighter compact tractors pretty clearly described in Post #2 and Post #3, above...

The category you are seeking information for is the Lawn & Garden Equipment category. T-B-N has one forum dedicated to this broad category: https://www.tractorbynet.com/forums/lawn-garden-equipment/ Lawn & Garden "tractors", perhaps better titled as "riding lawnmowers" almost always share...

R1 ag tires are four ply. R4 industrial tires are at least six ply. 50% tougher. Some traction loss relative to R1's pulling over soft or moist ground. Not much traction difference pulling over adobe brick. (Eight and 10 ply R4 tires are fairly available.) You will need replacement rims...

Do not bother. Great deal. Buzz down there with your money.

According to tractordata.com, the YT235C is a cabbed tractor. Yanmar YT235 2016 - YT2 Series Compact Utility tractor Variants YT235: ROPS YT235C: cab Dimensions ROPS Weight: 2558 lbs 1160 kg Cab Weight: 2910 lbs 1319 kg Yanmar YT235 Power Engine (gross)...

I've seen older 1) Honda, 2) Wheel Horse, 3) Ford and 4) Simplicity It seems like people LOVE those & are not so happy with the newer models. Mostly our machine will be used for cutting grass, but I would also like the ability to haul rocks/dirt/wood etc from one side of the yard to the other...

VIDEO:

No such luck. PTO shafts are universally difficult to connect and universally greasy. Buy a can of aerosol wax chain lube. Clean all the goop off the PTO shaft and tractor PTO splines to reduce mounting friction. You may need Blaster solvent and a 24 hour soak, followed by wire brushing...

The category you are seeking information for is the Lawn & Garden Equipment category. T-B-N has one forum dedicated to this broad category: https://www.tractorbynet.com/forums/lawn-garden-equipment/ Lawn & Garden "tractors", perhaps better titled as "riding lawnmowers" almost always share...

I have tried to connect an implement to the tractor PTO for the first time. I could not get the attachment to slide onto the PTO. I think it is a subtle alignment issue between the female splines of the implement and the male splines of the tractor PTO. New PTO powered implements, connecting...

Is it likely the former owner put the chains on the tractor to keep the cutter from dropping? YES. Often the check chains are suspended from divers types of fittings attached to the ROPS pivot/fold pin. The big name brand is ZERCO. The chains substitute for Three Point Hitch POSITION...

Pin on pallet forks "pin" on the the FEL lift arms, replacing the bucket. Lock pins have been known to be surreptitiously removed by tree branches. Lock pins are secured with Zip Ties by the experienced. Pins sometimes run into the bush, seeking to escape. Keep spares. Pin on pallet forks...

Branson 7845R 2016 - 45 Series Utility tractor Dimensions Wheelbase: 86.6 inches 219 cm Length: 152.7 inches 387 cm Height (ROPS): 102.6 inches 260 cm Height (cab): 107.8 inches 273 cm Weight: 5752 lbs 2609 kg Your Branson will be a considerable load. Dave's...

Massey Ferguson 1030 gross Loader capacity of 750 pounds is not much to work with. You can move brush and yard debris on bare bucket forks, and fairly light items on a pallet, nothing more. You will be replacing a wheelbarrow with pallet forks. If you purchase clamp-on pallet forks, the...

Massey Ferguson 1030 1984 - 1991 1000 Compact Series Compact Utility tractor Toyosha built Massey Ferguson 1030 Weight Shipping 2398 lbs (2WD) 1087 kg 2596 lbs (4WD) 1177 kg Operating 2815 lbs (4WD) 1276 kg 1016 Loader 750 lbs lift (full at pin) 340 kg

Ventrac by Toro, or a Steiner by Steiner. https://www.youtube.com/results?search_query=Ventrac https://www.youtube.com/results?search_query=steiner+tractor https://www.tractorbynet.com/forums/threads/prospective-purchase-for-the-mountains.439763/ My one qualification: Bucket capacity...

I suggest Roundup or the generic form of Roundup, Glcophosphat, in a one or two gallon sprayer. Two light applications will kill the weeds without damaging the trees. Herbicides work be when the target is growing vigorously.

Ground clearance due to larger wheels and tires is the single greatest difference in tractor specs between (all brands) of Subcompact tractors and the lightest Compact tractors. Larger wheels and tires permit compact tractors to bridge holes, ruts and tree debris with less operator perturbation...

Neither my hubby, nor I have ever operated a riding mower or tractor. Tractor will be primarily for mowing, however we need some hauling capability. The property is a mixture of flat area and slopes. T-B-N ARCHIVE: For five acres either a subcompact or compact tractor will serve. 4-WD...

When pushing the piles into the woods, something must have caught the mount/retention pin and knocked the small retaining pin out of the oversized bracket on 1 side. Bent hydraulic lines, scratched it all over and took out the rear lights trying to get it out of the woods with minimal damage...

I speculate the NS6010 has greater cooling capacity.

I don't have wheel spacers or anything. The easiest way to improve stability on your L3560 is to increase the spread between your rear wheels/tires. Spread adjustability when the rear of the tractor is jacked up is built into this model. Incrrement options are shown in your Owner/Operator's...

First check that all four tractor tires are correctly inflated.

The Spice Hunter Poultry Seasoning, Organic, 1.1-Ounce Jar Ordered a jar on your recommendation.

1) How much does your Rotary Cutter weigh? 2) Are the bolted together Three Point Hitch tower/frame bolts and nuts tight, so the tower does not sag? 3) Your Rotary Cutter may not be compatible with a Category 1 / limited Three Point Hitch. REFERENCE: TractorData.com - Three-Point Hitch...

John Deere 2305 2005 - 2010 2000 Twenty Series Sub-Compact Utility tractor John Deere 2305 Tractor hitch Rear Type I (limited) Rear lift (at ends) 1433 lbs 650 kg Rear lift (at 24"/610mm) 681 lbs 308 kg John Deere 2305 Weight Shipping 1450 lbs 657 kg...

Allocation of Grand Ls? News to me.

The HST+ seemed appealing until I saw the specs and it really just seems to add a lower gear to each range, not a higher one. If I am reading all the spec sheets correctly, the MX6000 has a faster travel speed in mid range than the L6060 has in mid-high. I suggest you post the spec sheets...

Your question is really unanswerable here. Until you have your new tractor and new implements, with novel draft resistance, it will be difficult to predict what transmission range you will use. You may find that your anticipated higher speed with a higher power tractor with less visibility...

Looking to purchase a tiller for a 20' X 30' garden plot. Fairly small garden for an expensive tiller. However, if you are affluent probably the best choice. A tiller will require considerable inside storage space. Following are cheaper implement options near you. You would have to...

Heavy work should always be done from the Three Point Hitch. When a blade moves dirt you want the draft resistance transferred to the large, rear tires which provide most tractor traction. Most, not all, rear blades can be rotated 180 degrees, although care has to be taken when pushing. I...

I am not sure what is considered an "implement" and what is considered as an "attachment" Implements are pulled behind a tractor. Attachments mount on other parts of the tractor, most often the Loader bucket or Loader frame with the bucket removed. IMPLEMENT definition in the Cambridge...

After getting the owner's permission, spray along the fence line with 2-4d herbicide. Herbicides are most effective when weeds are growing vigorously. There are stronger herbicides which will keep down weeds for 3-4 years. Shop Tractor Supply Co.

Am I crazy for thinking this what I've been looking for instead of something newer? If 2-WD is OK for you with a Loader, go for it. MORE: Do I need a 4 wheel drive tractor? 2-WD VS 4-WD site:tractorbynet.com About 239,000 Deere 2040 units produced in Germany. By tractor standards this...

John Deere 2040 1976 - 1982 Model year 1976-19791980-1982 2040 Series Compact Utility tractor 830 ↑ Series: 2040 → 2240 Production Manufacturer: John Deere Type: Utility tractor Factory: Mannheim, Baden-Württemberg, Germany Mechanical Chassis: 4x2 2WD...

T-B-N ARCHIVE: https://www.tractorbynet.com/forums/threads/rotary-cutter-bush-hog-considerations-for-compact-tractors.435711/

Does your L6060 have a 700 pound cab and air conditioning installed?

Many older 2-WD ag tractors used CORROSIVE calcium chloride tire fill for weight and to prevent tire-fill freezing. Look carefully at the steel rims for corrosion. You can buy replacement tractor tires easily. Replacing a corroded rim MAY present a problem. Older ag tractors were almost...

How many acres will you mow?

From my experience with compact tractors I will speculate an older 100-horsepower diesel engine tractor will consume no more than 1-3/4 gallons of diesel fuel per hour while mowing with a 144" Rotary Cutter. Surely your time is more valuable a commodity than diesel fuel while mowing...

Agri Supply is the go to supplier for disk harrow parts. https://www.agrisupply.com/search.aspx?ss=disk+harrow+parts Shoup has a limited selection of Massey Ferguson OEM disk harrow parts. https://www.shoupparts.com/products/tractor-parts/

Bush Hog and an All Purpose Plow / Field Cultivator.

It seems to me the Corn Belt cannot complain considering how costly federal government mandated 10% corn-ethanol-gasoline is to consumers in all fifty states. Ethanol fuel is one of the greatest special interest subsidies in USA history. If we had truly free markets corn-ethanol as a fuel...

I replaced my previous tractor with a low hour Kubota MX5200 which has a DPF system. I leaned towards Kubota because there are four dealers in my area. Surely one of them can repair a Kubota? (my logic). The MX5200 runs my 6' cutter in thick vegetation with no issues. The 4wd makes it easy to...

The last new pre-Tier IV tractors were sold in 2012. Tractor sales have continued to increase since 2012. With redesigned Tier IV engines tractors usually gain 3 - 4 horsepower. Most buying NEW Tier IV equipment have few complaints. Used anything can be problem prone due to lack of...

There still appears to be a decent selection of pre-Tier 4 machines available on the market. Stricter Tier IV off-road diesel engine emission reduction standards phased in dealer tractor inventory during 2009 - 2012, impacting tractor prices. Tier IV emission standards require tractor...

I don't really want to drop a ton of money given the low amount of work required but it seems like I would need 50hp but I'm not sure. A 50-horseower tractor will satisfactorily operate a 72" Rotary Cutter. A 72" Rotary Cutter mowing at 4 mph over smooth fields will cut 2-1/2 acres per hour...

T-B-N ARCHIVE: https://www.tractorbynet.com/forums/threads/rotary-cutter-bush-hog-considerations-for-compact-tractors.435711/

The "normal" weight distribution on a bare tractor is 40% front, 60% rear. This distribution will vary a bit by model. 1700 X 40% = 680 pounds. In addition to your 600 pound payload, your tractor will have most of 545 pound FEL weight and 680 pounds chassis weight on the front axle. 600 +...

The L6060 engine is turbocharged. You will have to consider carbon monoxide accumulation as your tractor operates indoors. Carbon monoxide is odorless and tasteless. Determine the height of a cabbed L6060, to be sure it will pass through your arena entry door.

My 35-horsepower, 3,700 pound bare weight Kubota L3560 pulls my TR3 rake fine in HST medium range. OP's New Holland HST transmission may need service. OP's TR3 rake my be wider than my TR3 rake.

sand = R1/ag tires for traction, but may rut damp ground. sand = R14 tires for slightly less traction, slightly less rutting potential. snow = turf tires with snow chains. turf = turf tires, or air inflated R4/industrial tires. Puncture resistance and Loader support = R4/industrial tires...

New Holland Workmaster 35 2013 - 2015 Workmaster Series Compact Utility tractor Dimensions Weight: 2900 lbs 1315 kg

1) You should be considering tractor weight as your first metric. Not horespower, not transmission type. The fundamental importance of TRACTOR WEIGHT eludes many tractor shoppers. Tractor capability is more closely correlated to tractor weight than any other single (1) specification. The most...

1) In the upper right corner, click on your T-B-N name. 2) Click on ACCOUNT DETAILS. 3) Scroll down to tractor description.

90% of compact tractors sold in the last ten years came with an HST transmission. For many tractors, especially light tractors, HST is the only transmission offered.

It's a 40 ft X 60 ft, fenced garden, so maneuverability is limited. Soil is extremely sandy. Keulavator Frame, 3-Point Cultivator Frame, Cat. 1 $279.99 ea (frame only) https://www.agrisupply.com/keulavator-frame/p/51946/ This will be an excellent match for your 2-WD, 2,230 pound bare weight...

Kubota L285 1975 - 1981 Compact Utility tractor Mechanical Two-wheel drive Differential lock mechanical rear Dimensions Weight 2230 lbs 1011 kg

John Deere 2240 1976 - 1982 Model year 1976-19791980-1982 2040 Series Utility tractor Production Manufacturer: John Deere Type: Utility tractor Factory: Mannheim, Baden-Württemberg, Germany Mechanical Chassis: 4x2 2WD 1) As Tractordata.com does not show a...

Consider a rear engine Skid Steer, rear engine Compact Track Loader or rear engine, articulated Wheel Loader in lieu of a front engine tractor.

How high do you need to lift 2,000 pound metal totes of firewood? How smooth and level is the ground you will traverse? A 3,700 pound bare weight Kubota tractor will be sufficient for some, but fairly tippy and may not lift high enough for you. (Kubota MX, Kubota Grand L with LA1065 Front...

Post a LINK to the CRI web site. You have not provided your location as part of your T-B-N PROFILE. How hard, how dry, how stoney is your soil? More information needed if you want useful responses. Your Kubota L4760 weighs the same as my Kubota L3760...

Shear bolts are intentionally weak/soft Grade 2 bolts. Shear bolts for compact tractor implements, such as a Kubota L3400, are usually 7/16" in diameter. Length depends on the implement. This is a common bolt-Grade and bolt-diameter readily available at hardware and farm supply stores for...

You are a pretty clear writer. If you tell us your difficulties one at a time, as you identify them, we can probably resolve each one for you.

There are only two types of PTO latch. 1) Button 2) pull-back collar. If you do not have the button, you have the pull-back collar type. VIDEOS:

I am a new member and a woman. Please bear that in mind if my questions sound uneducated. I started using our 7 foot finishing mower in 2020 when my husband died. You probably have a pull-back collar latch. Research below. T-B-N ARCHIVE: PTO SHAFT, BUTTON OR COLLAR LATCH...

Let us record this, just in case we end up in court as defendants.

VENDER:

August 12, 2023 Hello everybody. I’m looking for a front end loader for a 1989 Yanmar 147D. They said it’d be impossible, and so far it has been. Koyker and Bulldog don’t make any. I figure SOMEONE has an old tractor with a loader on it, or knows of an aftermarket company that would work...

Jeff is not invested in anything. Tractor shoppers frequently become confused trying to understand tractor capability. Bare tractor weight is a "one number" tractor specification easily found in sales brochures and web sites, readily comparable across tractor brands and tractor models, new...

Harrow 560lbs as shipped, 360lbs weight added equals 46lbs per disc. Not optimal, but better than originally designed by KingKutter. Could probably add an another 90lbs to the stack(s) for 450lbs supplementary weight, but will see how 360 pounds supplementary weight works first. Does your 560...

SPLIT-FIRE Three Point Hitch mounted SUBSTITUTE for the tractor Front End Loader: 3 Point Carry All Archives - Split-Fire USA 3 Point Carry All is for Rural Property Owners, Hobby Farmers, Landscapers & Contractors for Many Purposes - It Expands the Capacity of Compact Tractor. SPLIT-FIRE WEB...

Almost all diesel engine related tractor problems are fuel problems. When I lived in rural Gilchrist County, Florida, I paid the higher price for fully taxed highway diesel at a high volume BP service station, rather than buy "red" less taxed offroad diesel from the Citgo. The Citgo offroad...

Searching for buying advice on garden tractor, with 3 pt, rear PTO, strong enough to plow, no need for mower. Can be used, or new. Kitchen garden, 1/4 acre. Been plowed and disked before, have brinly hardy 10”plow on craftsman gt 5000. Hard to get enough traction to plow smoothly. Has tractor...

The DPF has to be HOT to burn off accumulated particulates. On my KUBOTA parked regernation requires 2,200 rpms for 2 - 3 minutes before the DPF gets hot enough to commence regeneration. Then 16 minutes at 2,200 rpms to complete regeneration. What does your MF 1739 Owner's Manual recommend?

VIDEOS:

Varied opinions on tractor weight: https://www.tractorbynet.com/forums/threads/tractor-weight-as-one-1-criterion-in-tractor-selection.416923/

Craftsman GT5000 2009 - 2010 GT5000 Series Garden tractor Husqvarna built Weight 644 lbs 292 kg The fundamental importance of TRACTOR WEIGHT eludes many tractor shoppers. Tractor capability is more closely correlated to tractor weight than any other single (1)...

Your angle iron Disk Harrow will never survive 300 hours with a 360 pound supplementary load. Why did you not buy a 1,000+ pound box frame disk harrow to begin with? There are always used disk harrows for sale at farm auctions and online. If I add 203 pounds of weight I'd have 47 pounds per...

What Is an Investment? An investment is an asset or item acquired with the goal of generating income or appreciation. Appreciation refers to an increase in the value of an asset over time. When an individual purchases a good as an investment, the intent is not to consume the good but rather to...

T-B-N ARCHIVE: Backup camera site:tractorbynet.com

VIDEOS: https://www.youtube.com/results?search_query=sub+compact+tractor+plowing

Previoiusly owned Kubota BX pricing: https://www.ebay.com/sch/i.html?_nkw=Kubota+BX+tractor&_sacat=0&_udlo=9000.00&_sop=15

Has your 1/4 acre been broken / plowed before? Are you intending a kitchen garden or permanent landscape beds which will require plowing only once? KUBOTA WEB SITE: https://www.kubotausa.com/products/tractors/sub-compact/bx-series

LAWN & GARDEN category tractors are 95% 2-WD, have turf tires and do not have a TPH nor PTO. LAWN & GARDEN tractors typically weigh <1,000 pounds. (Some of the top John Deere Lawn & Garden tractors, sold exclusively by John Deere dealers, are exceptions. $$$ )...

#1 is for cold temperatures, when jelling of #2 diesel might occur. What is your location?

I have tried to connect an implement to the tractor PTO for the first time. I could not get the attachment to slide onto the PTO. I think it is a subtle alignment issue between the female splines of the implement and the male splines of the tractor PTO. New PTO powered implements, connecting...

Chipper knife sharpening for dry wood. I've got quite a pile of fallen tree limbs collected over a couple of years. Mostly maple, but some Hemlock. I'm in the processes of freshening the MacKissick chipper/ shredder, and anticipate going after that pile of dry and rotted stuff. Should The...

What I really miss from my chipping experience is pulling forty to fifty foot long vitus-rotundfolia (wild) grape vines out of Florida trees using my tractor, then feeding one end of the vine into the chipper, then, standing well back, watching the vine change into thirty pounds of chips before...

Is there such a thing for a compact tractor Three Point Hitch?

It is really the pits when an OP posts incorrect information opening a thread. i am out of here.

Massey Ferguson 30 Production 1963 - 1964 Dimensions Weight: 3000 lbs 1360 kg No way........... I speculate that a 3,000 pound bare weight tractor of 1972 (?) era would have a FEL lift of about 850 pounds and lift height would be low by contemporary standards. My advice: Be...

No. Chipping totally dry wood causes the blades to get very hot. Hot blades dull considerably faster than cool blades. Try to chip when material is green or half dry. It requires considerably more PTO power to chip desiccated woody material than moist or semi-moist material. I had a...

I have to believe ICE vehicles created the conditions for enormous 2023 wildfires in Canada and Russia. What do you think? As more and more of California and Arizona run out of irrigation water and temperatures rise too high for migrant workers to pick field crops, I expect parts of...

58 MPG Seeking to cut greenhouse gas emissions, the B i d e n administration has issued a proposal directing automakers to raise the fuel economy of their vehicles to a fleet-wide average of 58 miles per gallon by 2032. The proposed rules by the National Highway Traffic Safety Administration...

If you are retired why not tractor during just nice days? Then you can skip the cab. Note that I live full time in Florida too, about 100 miles from Crawfordville/Tallahassee. Today, July 31, 2023 the weather forecast is 74 degrees at dawn. Tractor from 7:00 AM until 11:00 AM, then quit for...

I can tell you from experience with my L2501 HST, going from 25 HP stock, to 44.1 HP with the Turbo Kit, was a significant improvement in operating performance. Luckily, no regen or DPF for me. DPF equipped tractors produce only ~ 1% ~ of the cancer and smog producing diesel particulates which...

Bro Tec has the widest selection of wheel spacers. I expect they know what TYM wheel spacers are the correct fit for your TYM badged-for-Mahindra model. https://bro-tek.com/products/index.php?s=spacers&searchc=1&addon%5B%5D=&addon2%5B%5D=&srt=

Mahindra 2538 Cab Weight: 3351 lbs 1520 kg I recommend 2 X 3" wheel spacers. Steel spacers are likely to be much stronger than aluminum equivalents. I value peace of mind. (I installed Bro Tec steel wheel spacers on my 1,800 pound Kubota BX) If you have R1/agricultural tires on your...

DPF equipped tractors produce only ~ 1% of the cancer and smog producing diesel particulates which are produces by ~ 25-horsepower diesel tractors without DPFs. Turbocharging an L2501 so it produces 200 times as much pollution as a 33-39 horsepower, DPF equipped Kubota tractor should be a...

This thread was first posted YESTERDAY, 7/29/2023.

I have tried to connect an implement to the tractor PTO for the first time. I could not get the attachment to slide onto the PTO. I think it is a subtle alignment issue between the female splines of the implement and the male splines of the tractor PTO. New PTO powered implements, connecting...

A grapple is definitely on the list of attachments I want to get. Consider SSQA (Skid Steer Quick Attach) 36" pallet forks in lieu of a grapple. Definitely cheaper, less complex and lighter. 671665,684423

3,397 pound bare tractor weight may be too heavy for 25-horsepower to move with a ground contact implement in use or ascending hills. Consider that cab air-conditioning will absorb 3-4-horsepower when operating. If you add a 700-pound Backhoe you will be way beyond a reasonable weight for a...

T-B-N ARCHIVE: https://www.tractorbynet.com/forums/threads/compact-tractor-diesel-particulate-filters-dpf-version-2-0.414321/

You need wheel spacers for the rear, not the front. T-B-N ARCHIVE: https://www.tractorbynet.com/forums/threads/l3902-very-tippy-what-am-i-missing.468580/ VENDER: https://bro-tek.com/products/index.php?s=&searchc=1&addon%5B%5D=Kubota&addon2%5B%5D=B2650&srt=

This problem may be nothing more than dust accumulation. Spray with Blaster solvent. Wait four hours. Spray with Blaster a second time. Tap stuck parts with a mallet.

It is the normal seasonal evolution. 50% of the every year's threads originate in the Spring.

L = Loader M = Mow H = Highway

https://www.tractorbynet.com/forums/threads/what-is-the-value-of-3-range-hst-vs-2-range.425295/

YouTube: https://www.youtube.com/results?search_query=tractor+backhoe+removal I would have to remove the backhoe to substitute another implement. I think a backhoe would make the tractor more difficult to maneuver in tight spots. YES and yes Last production of your Farm Trac 60 was in...

Where can I get replacement reversible tips and bolts for a Fred Cain spring protected field cultivator? I need nine replacements with (specialized) bolts and appropriate nuts. eBay...

I looked there but I don’t know what the size is. While it has been five years since I last purchased point replacements I am confident the SKU IF210UB will be an exact replacement. SKU IF210UB was impressed into my OEM points. More Venders: cultivator point if210 for sale Contemporary...

As SHIPPING will be a significant part of your total cost, it would be helpful to know your LOCATION.

eBay https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=IF210UB+Field+Cultivator+Point+2%22+Wide%2C+10-1%2F2+Long%2C+5%2F16+Thick+%7C+eBay&_sacat=0&LH_TitleDesc=0&_odkw=cultivator+points&_osacat=0 Correct plow bolts size: 7/16"-14 X 1-3/4" (#3 plow bolts - 1/3/4"...

Perhaps a helpful thread: https://www.tractorbynet.com/forums/threads/l5740-front-tires-upgraded-to-fix-lag-ratio.409217/

I didn't hear any grinding or other sounds so I'm unsure of what happened. Are you sure your rear tires are correctly inflated? It is not uncommon for under pressure tractor tires to allow the wheel to turn within the tire beads.

WHAT IS YOUR LOCATION?

Massey Ferguson GC1715 Dimensions 2013 - 2018 GC1700 Series Sub-Compact Utility tractor Shiping weight: 1433 lbs 650 kg Ground clearance: 6.7 inches Subcompact tractors are designed to be operated over smooth, flat, clear ground. Working brush is inappropriate for any...

What is your location ?

The OP has one (1) acre.

We need to know your location to answer this properly.

You are probably right. Show me a reference, please. The Kioti specs were copied directly from Kioti's web site. No turbo is specified.

7,100 ft elevation, high desert. DK6010SE HST Cab Weight Weight w/ Ag Tires w/ Cab 4,043.3 lbs. (1,834 kg) Engine Engine Model 3H-TH4C Engine Gross Power 57.7 hp (43 kW) Rated Speed 2,600 rpm No. of Cylinders 3 Displacement 111.4 cu. in. (1,826 cc) Presumably normally...

Ford 8N Mechanical Two-wheel drive Ford 8N Weight Shipping 2,410 lbs 1093 kg Operating 2,717 lbs 1232 kg

A 4-WD tractor of 2,544 pounds weight will handle a 2 X 12" or 2 X 14" moldboard plow readily. Mahindra 3215 2006 - 2008 15 Series Compact Utility tractor Mitsubishi built Dimensions Length: 121.3 inches 308 cm Width: 59.8 inches 151 cm Operating weight: 2,544 lbs 1153...

https://www.tractorbynet.com/forums/threads/kubota-l3560-grand-l.454167/

I suggest adding your Indiana location to your T-B-N PROFILE.

Tractor capability is more closely correlated to tractor weight than any other single (1) specification. The most efficient way to shop for tractors is to first identify potential tractor applications, then, through consulataton, establish bare tractor weight necessary to safely accomplish your...

What model LS did you have? The Kubota is 2,700 pounds bare tractor weight. Let us determine the exact bare weight of your prior LS. The LS Backhoe would be much more effective counterbalance than either a Rotary Cutter or a Roto-tiller. I got R1 tires w/fluid set at the middle width...

I've been looking at the Bobcat CT2025, Kubota L2501, or the Kioti CK2610 Bobcat purchases tractors with a Bobcat badge from Kioti. The only difference is that Bobcat tractors have white paint and do not have Kioti produced loaders. Bobcat has been in-and-out of the tractor business over the...

Massey Ferguson 35 1960 - 1965 Utility tractor Engine Detail Continental gasoline 4-cylinder liquid-cooled OHV Displacement 134 ci 2.2 L Bore/Stroke 3.3125x3.875 inches 84 x 98 mm Compression 6.6:1 Rated RPM 2200 Idle RPM 450-2250 Dimensions Wheelbase...

How disappointing.

Forward rotation roto-tillers are probably 85% of the market. Forward rotation roto-tillers push the tractor forward. Most would purchase a forward rotation roto-tiller 12" - 18" wider than rear tire spread in order to be able to till near fence lines, garden margins and for general efficient...

I do not believe Bora produces any wheel spacers which Bora markets to the tractor segment.

I'm looking to make my NH TC29D HST more stable on sloped land. Your best approach is to add wheel spacers to your rear wheels. Bro-Tec is the supplier in Canada I use in Florida. Bro-Tec's wheel spacers are industrial art...

New Holland TC29 1999 - 2003 Boomer TC Series Compact Utility tractor Variants TC29 gear TC29D hydrostatic New Holland TC29 Power Engine (gross) 29 hp 21.6 kW Engine (net) 27.4 hp 20.4 kW Gear PTO (claimed) 25 hp 18.6 kW Hydro PTO (claimed) 23.6 hp 17.6 kW...

Can you think of any reason I wouldn't want to widen the stance up front? Your minimum turning circle will be wider, with wider spread front wheels. When you spread front wheels, stability changes depending on the angle of the front axle. Much better to spread the rear wheels. Would a 2wd...

50% fill gives the lowest center-of-gravity. Once fill is over 50% your are adding ballast ABOVE the axle.

As you have a Front End Loader on your Mahindra AND are new to tractors, you may be concerned with your tractor feeling tippy. If this is so, rather than attempting to add dual rear wheels, cost effective solutions would be: 1) Add rear wheel spacers to spread your existing rear wheels. You...