Search results

I have bought some discount oil for my ford 4500 industrial with 755 backhoe. Access AG hydraulic oil. Can’t find any info. Will it work or should I take it back.

I’m working on my Ford 4500 industrial just got hose replaced from backhoe to manifold cost a lot more than I was quoted but I got screwed. It is what it is anyway my outrigger levers seem to be sticking together. I can’t get them to work independently it’s very difficult. What is the repair for...

I needed a canopy on my coyote after my umbrella blew away. So this is what I did. I used the teneau cover from Toyota tundra that I got for free cut it down painted it orange I cut it to fit the 2+2golf cart cover. Built the frame out of pressure treated two by fours and 2 1/2x five inch...

This is a follow up and another question about my backhoe hose replacement a Ford 755 backhoe on a Ford 4500 industrial. I have decided to do the hoses myself and I started looking at all the places to pour hydraulic oil so far if correct The differential the transmission and I just discovered...

been a long time. My tractor has been sitting for way too long. I was hoping I could find somebody reasonable to replace my hydraulic hoses for my backhoe. I couldn’t. I have to do it myself. I have a 4500 Ford industrial with 755 backhoe The hoses that go under and up to the manifold seem very...

Hello tractor gurus . Kind of a newbie didn’t grow up with this stuff . Bought my first tractor at about 60 years old.own a Kioti 26 and an old Ford 4500 industrial with 755 backhoe .Just pickedup last year for 2 grand .new injector pump starter.added Silverado seat an boat seat for back hoe...

I am installing a thermostart in my Ford 4500 diesel. I’ve put it into the intake manifold and it’s wired to the ignition. I tried using just a canister above gravity, feeding diesel to the thermostart that did not work. My question is if I T into the return lines by the Injectors will that...

Picked up pto gen this year win power 30 k watts My little Kioti CK25 probably only generates 15k but already 4 outages this year and it hasn’t even snowed or gotten below freezing here on Puget sound in PNW. LOVE THIS THING ,

I would like to give a shout out to TMG the manufacturers of my new post hole digger. I installed it on my CK 25. It is over built for my tractor. I know that. but it is so robust that it will work well if I get a larger tractor and it will do fine on mine for now. I was just very impressed with...

I purchase oversized post hole digger TMG TPD12 rated for 35 to 65 hp got a good deal couldn’t pass .Now I’m scared Putting it on my CK25 .It’s class 1&2 auger .CK25 is class 1 25 hp Opinions.TIA

Hello .I purchased A TMG-TPD 12 that says rated for 35 to 65hp tractors at this time I want to use it on my Kioti CK25 class 1 25hp tractor. Will there be a problem it is much heavier than smaller phd but I like things over built in case I move up in tractor or want to lend to neighbors with...

I finally got to test my PTO generator bought it, not knowing if it worked or not anyway took you gurus advice and bought the digital meter. I it seems to be working fine. My question is in one picture I have it running with the tires off, which puts it level and a straight line with my tractor...

Just want to say thanks to all the people in this forum . So far it’s been great. I am fairly new to the Tractor world and appreciate all the help and opinions. Thanks to all you guys out there.

Look at buying this grapple . I want to add to my CK 25 coyote I do not have third function, and all I have at rear is PTO and three-point line. What else will I need besides the control box pictured? I am also thinking of purchasing skid steer, adapter, and having the plate welded on that...

Would it be wise to attack these stumps with my backhoe?

ford 4500 ind industrial is it vintage ? If so I’m prehistoric! Just want to know which forum for discussion?

This is how I decided to add Thermostart opinions appreciated, motorcycle front brake cylinder. Discovered I needed to take the top off for it to work no vent and it took about 2 to 3 minutes for the intake manifold to get warm. Does that sound right?

I am confused by all the different PTO drive lines just picked up a winpower generator 30 KW. 6spline at generator six spline at my PTO Tractor side. what PTO drive line do I specify in my search

I picked up a beast PTO generator bigger than I can run with my coyote CK 25, but I’ll get what I can out of it. My question is I need a new meter one I can see digital preferred voltage frequency and current draw. Any suggestions would be appreciated TIA.

I am trying to install a Thermostart on my 4500 Ford three cylinder diesel. There is no pre-threaded a spot on my intake manifold. Do I need to drill it out and tap a half inch thread therefore the Thermostart any information would be very helpful TIA.

I have a Ford 4500 with a 755 backhoe . Does anyone know which cylinder rebuild kit I need for lyft cylinder?TIA

Look for omc part #0387397 bottom of tilt cyl coiled hydraulic tube.E115TLCRD.PLEASE HELP.CANT AFFORD NEW PRICE

Ford 4500 Just noticed the loader attachment pivot pins. Two lowers are not grease able and one upper was replaced with a piece of pipe would like to replace all four .Nowhere to be found any help would be appreciated. 1 1/4” x 6 1/2 ” greaseable if possible. TIA

I have a Ford 4500 3 cylinder diesel removed bad starter ordered new one from Napa. Napa started my motor three times and then quit. I saved the core to be rebuild. Does anyone know specifically which rebuild kit I should get thanks in advance.

Question, what do you guys think of aftermarket wiring harnesses for a Ford 4500. Steiner wants $500 aftermarket is 90 I’m tempted opinions anyone anyone. TIA.

Trying to take side panels off around fuel tank to inspect all of harness in that area does fuel tank have to be removed?.

Hello I am getting ready to replace all hydraulic lines on my 4500 tractor 4500 tbl . Try to get Idea of how much it will cost.Would like to order standare length premade.Any idea so on sizes ID I have service manual. Does not tell me.

OK working on my new to me. Ford, 4500.picked it up for 2000. about 800 into it runs good ordered filter new switch. I ordered a new seat for about a 150. Then decided to do it myself. Picked up a Silverado seat for 50 bucks. I'm cheap painted the frame for the bachoe seat. Thru a boat seat on...

OK folks I am officially the proud owner of a Ford 4500 picked it up for two grand after parts paying a mechanic to help me get it started and he also had a big ass truck and trailer to help me get it home a new starter and solenoid. I’m into it for three grand, I will send some pictures. You...

New to this forum. I hope you guys can help I just bought the tractor pictured. Can you help me identify. I was told it was a 755 but according to everything I researched. The 755 is a 4 cylinder 96 hp. PLEASE someone tell me what I have. Looks like 3cyl perkins