Search results

Purchased New, brought it home within 15 hours oil pan started leaking, dealer fixed.......within 25 hours FEL compression fitting sprung a leak, dealer fixed. Last week wife found a nut on floor in the barn (didn't think anything about it), Friday found a new 1.5" carriage bolt near the barn...

After 11 years and 1100 hours later the ol workhorse has served its purpose. The dealer will be here in the morning to haul her off after dropping off the new LX2610. We are needing greater lifting, hauling and pulling capabilities. More to come

Is anyone using a 6' blade on a BX25 (has Pat's quick connect on 3ph)?? I will only be using it for back dragging my driveway and any snow we might get. I won't be using the cutting edge but a very rare occasions, maybe cutting down the center hump in the drive way (drive way is 1/3 of a mile...

I really need to clean the engine on my BX25. Been doing a lot of gravel work (mostly 411's some call it rusher run) and the dust is caked on. I've tried blowing it if but really doesn't help much. Any sugestions? Would using an engine cleaner with water be OK (not high pressure )??? Thanks!

I'm nor so much an electrician and have looked at every thing on the Web so my questions will be easy I hope. Recently purchased a blazer LED kit. It's has 12 3 watt LEDS (1900 lumens ) and pulls 2.4 amps. I'm going to hook into the wiring harness at the back of my BX25. I will be putting a...

I'm wanting to build a dolly (wood)for my BX35 FEL and BH. Has anyone done it, ate the any suggestion, videos etc. available

Looking for a rear blade for my BX25. I see King Kutter makes a 50 XB model but would like to find a 6' blade. Would the 6' King Kutter work? I saw a Bush Hog 6' (3506) blade that I really liked. Thoughts, Suggestions and help would be greatly appreciated........Oh using it mostly for snow...

Has anyone had a problem with the cutting height knob. Mine is difficult (to say the least) to put into the lock position, it moves easily from the 0 to 4 but going from the 4 to the locked up is darn near impossible, I have to raise up the deck to max then rock the lever up and down very...

Getting the MMM ready for spring. Does anyone know the size of the blade mounting bolts for the RCK60B-23BX? Putting new blades on this week. Also for those who have the MMM is it ok to use an impact wrench to remove and install? Thanks for the help

I'm getting ready to change the oil in my BX25 and interested in what everyone is using in their 25's. I've been using Kubota brand 10-30 but would like to find a synthetic. I've used the search engine but couldn't find any conversations on oil types. Any thoughts or does anyone know where I can...

Question??? I check the oil and hydro before every use but I found that when the 3 pt is dumped, the dipstick on the hydro shows too much but when I raised the 3pt it shows dead on. I've been checking the hydro with the 3pt raised and cold. Any thoughts?? Thanks

OK got a question........getting ready to put more 411's (crusher run) down on our 1/4 mile driveway (roughly 120 tons to lay appx. 2" base) but got to thinking about putting crushed asphalt down instead. Was wondering if any of you have used crushed asphalt and what you think of it. Our...

The BX25 now has a new home:thumbsup:. The BX has earned a new place to live......I've said it before, this is one hard working machine, from cutting the pad to speading 100+ tons of limestone the new 30' X 40' Cleary polebarn is complete. If anyone has plans on building a new polebarn I...

Started a new project with my BX25, it needed a home (along with all the other toys uuuhh I mean tools) Putting up a new 30 X 40 pole barn plus adding to my exsisting driveway. Started working on the pad about 3 weeks ago, the grade was within 2 inches with the exception of one corner was...

Spent the day changing oil, front axle, hydro fluid on my BX 25. While I had the energy I went ahead a drained the gear case on the 60" MMM, then I read the manual to find out the correct oil to use and the manual states to use SAE 90 (API GL5)....well guess what no one around here carries the...

OK, dumb question..........checking the Hydro fluid level, should it be done with the tractor running or off? Sorry but had to ask.

Getting ready to put a 60" belly mower under my BX25 at a local dealer. Having the deck under the tractor does it interfer with the 3ph operations, can you use the bh with the belly mower attached? Is there anything I need to know right up front about the mower deck, things to look for, things...

Need HELP. Decided today to change out the hydro fluid on my BX25, everything was going well until I put the filter back in and tightened the bolt in.........never guess what happened bolt head broke off :mad: Any suggestions???? Is there anything I can do, besides take it back to the dealer...

Can anyone tell me how this works on the BX25. I've read other threads but still can't figure it out. I've seen where the stops are but moving the hitch lever it completely goes over the stops....I've tried pulling the lever to towards me but the lever still does not come in contact with the...

Ok I know its been discussed but I looked and can't find the thread. I'm coming up to my 50 hour service for my BX25. Would it be better to take it to a dealer so that they can go over (for warranty) every thing. I'm not that mechaniclly inclined but can do oil changes and such. Looking at...

Looking to put a thumb on my BX25......does anyone have thoughts on which one would be the best. I been comparing the Brotek and the Wallensteins. Have also read that the Wallensteins has a few issues with it moving and potentially causing damage. Any suggestions? Any other bolt on types out...

Looking to put a thumb on my BX25......does anyone have thoughts on which one would be the best. I been comparing the Brotek and the Wallensteins. Have also read that the Wallensteins has a few issues with it moving and potentially causing damage. Any suggestions? Any other bolt on types out...

I've got a dumb question on setting up the BX25 BH for digging. When setting the FEL do you use the blade tip to raise the front of the tractor up? When I 1st got the machine I was told to basicly dump the bucket and set the blade tip into the ground and raise it so that the front tires are...

Looking for an aerator for my BX25, would like a heavy duty unit, any thoughts?? Also is there an overseeder out there that the BX25 can handle. We have about 2.5 acres in turf grass that was planted last year and has come nicely but I understand that to maintain a healthy yard, aeration on a...

Looking a buying a mower deck for my BX25. I enjoy my time outside on my toy (oooppps) tractor so cutting time is not an issue. I have an 8 X 5 trailer to load the tractor only on, how much difference is the 54 inch cut from the 60. I'm thinking the 54 so I can get in on the trailer, not a...

Is there a Pat's for the BX25? If so is anyone out there using it, how well does it work. I put my new sprayer on this weekend :mad:and #*#&$%^# :D. If there is one made I'm in

Bought my first PTO toy...tool this past weekend:D for the BX25, a Fimco 50 gal, 3pt sprayer....now the questions :eek: From everything I read the rear PTO runs at max 540 rpms with the mid running 2200 / 2400 max rpms.....at what rpms do I need to run the engine to achieve specific rpms...

May be a simple question.....looking a putting a belly mower on the BX25, any thoughts on the difference between the 60" and 54" cut???? I'm thinking the 54" just because tractor will fit on my trailer with the 54" deck. Is there a mulch kit for these mower decks??? I will have the dealer...

First implement I'm looking at is a PHD. I'm looking at the Woods PHD35, with a 42" bit. Is this too much for the BX 25 or should I go with the PHD25?? Anyone using the PHD35 on a BX??

Finally bitting the bullet:eek:.....worked out a deal with a local dealer on a new BX25 for $15,500 which includes the 3 point hitch. A couple of questions..... 1....how difficult is it to match up heavy duty implements for the point hitch. I'm needing a PHD that will last...

1st things 1st, I've never owned a tractor, so I'm pretty challenged! Looking at buying something buy next spring (wife said so!!!!) We recently built a new home on 6.5 acres; 2 acres of lawn, 1/4 mile gravel drive way and the rest is field grass and will be leaving most of it as is. With the...