Search results

This whole thread is a very interesting read. I am like the one who posted about his JD 790 and that he owns 2 of them, unless the one he loaned out gets squatters rights! I own a JD 990 with a 300CX FEL and an 8B BH. Of course this tractor is 100% Yanmar. The 8B BH is 100% US made and the...

I would agree and say that is good unless the state you live in does not allow you to burn like the one I live in. Then either renting or buying a chipper for your needs becomes a reality or hiring it out which can get pretty expensive.

Yes it does have sway control built into the hitch. From the link I gave: "Combines weight distribution and sway control in a single unit without additional hardware." Also in video reviews they talk about the sway control and how good it is.

What about the Husky Center Line TS https://www.huskytow.com/husky-towing-center-line-ts I have been looking at that WDH for some time and from all I have watched it seems to be a very good WDH.

I grew up in central NH, Sanbornton, exit 22 on 93. We had rocks like you have. I have lived in northern NJ for almost the past 40 years. I have it as bad and probably worse than you do regarding rocks. I have them in the sizes you do in galore! My 990 with the Artillian forks will lift...

I am not on board with buying an EV in fact I just recently bought a new F150 with a 3.5L Ecoboost. I love the truck. I don't like the fact that gasoline has gone to over ~$4.70/gal but our present hands are tied. Over 1.5 years ago we were energy independent as a nation and now we are back...

I am still waiting on the history to prove that our earth is 500k years old never mind 500 million years! We can't prove in any way and especially in a scientific way that humans have existed 1/10th of a million years! Again no scientific proof what so ever.

Your Tesla Model 3 sounds good and I am glad you like it. But don't say you will never buy an ICE again unless you mean a car only, because I don't yet know of too many battery powered tractors that are available. I am sure they will come at some point with all the drive to stop the use of...

Just checked. Its been deleted so someone purchased it.

that is a good price especially with the extra cable too!

How many shims did you use? What was the pressure before you added the shims and what is the pressure now?

I fully agree with you. They are like the tractors my father had which you find most of them still being used today. They are bullet proof and easy to work on and straight forward. When you add the Yanmar diesel you really get a good thing. My 990 I will keep until I can no longer use it...

How long have you been using it with the shim pack? I have thought about doing that with my 990 but I am hesitant not wanting anything to break since it increases the pressure for the whole system.

This is the same for the JD 790 and 990 and the 3005 and 4005 which were almost the same tractors 790/3005 and 990/4005. Apart from changes between the models in fuel pumps, Alternator output, and even engine displacement etc, they were all Yanmar through and through. I own a 990 late model...

I owne a JD 990 which is the big brother to the 790. They are all Yanmar which is a very good tractor. They are bullet proof, simple to work on. Yes they are a collar shift transmission, no HST or synchro type. Collar shift is what I grew up on. If there would be anything I would like to...

In July of 2020, I paid $2900 with everything and that included: 1, Igland 3501 winch with PTO shaft, 165' of 10 mm cable, 3 chokers and 3 sliders - $2,645.00 1, 5" diameter sheave - $55.00 1, Igland self releasing sheave - $200.00 Total $2,900.00 No sales tax If you pay by check the shipping...

I have to look up the price I paid and I will try to do that tomorrow. I believe it was below $3k and it came with so many chains etc. I will get you all the details. I know that the Igland was less money than the Norse from the place I bought it in NH. Here are some good links to videos of...

whether you go with a 3ph splitter or a gasoline engine splitter you should check out Split-Fire. One of the best splitters i have ever run and I have run a lot of them like ones that you can use horizontal or vertical etc.... One person posted about getting a splitter that splits both on the...

The Igland are good winches and the Norse is actually an Igland winch made by Igland for Norse. You can find them here https://nosted.com/na/products/winch I got my 3501 from Windy Ridge in Tamworth NH. They are listed as a dealer. I got a very good deal along with free shipping because of...

You could get the Igland 2501 as well. It works with tractors with 15 hp and above and you can find it here https://nosted.com/na/igland-2501 On that page they show all their NA dealers. I own a 3501 which I got for a great deal. I still have not used it yet and am hoping to this summer.

I live in NJ in a wooded area with 2.3 acres. I grew up on a dirt road in NH back in the 60's on a gentleman's farm. My dad was a master machinest and yet we always had some beef cattle, an occasional pig, we burned 12 cord of wood each winter in a Sam Daniels furnace which was in the basement...

Sold off of Craig's list to a happy JD 750 CUT owner!

I have a JD 990 with a 300CX FEL and the HD bucket with a bolt on knife edge. The bucket is 72". I was able to buy my Ratchet Rake from TSC when they were getting rid of them so I got a $300+ RR for $80 new at the time. I have used it a couple of times and it has worked very well and no...

Brand new, still in wooden crate wrapped in original plastic, Tractor Supply brand Country Line Post Hole Digger. This has been in my tractor shed attic for a long time. I bought it new and thought that I would use it but I never did. My soil is full of clay and tremendous amounts of rock...

Here is 3PH "Lumber Jack" splitter that is up on a stand and in-plane with the the tractor from Agri Supply instead of crossplane like the Speeco is. The reviews are positive apart from leaving them in the packaging outside and the manual gets destroyed. Looks like a standard going price of...

Tractor Supply sold the Speeco under their CountyLine branding on it in yellow. I know, I own one. Here is a video of a guy using it with his Kubota and another one as well with a Kubota They do not sell it anymore at least their website no longer shows it...

Its the corn syrup in the gas. Put a shut off on the gas if you do not already have one and when you are done running the small engine turn the gas off and let it run until it dies from no fuel. This will save your carburetor and allow your unit to start up when you go to use it again.

I bought my Woodland Mills WC68 last spring. It took about 8 weeks lead time. Woodland Mills does charge your CC up front. I wish they did not. I know this is always controversial. I also bought an Igland 3501 skidding winch at the same time. I had all kinds of expectations to use them...

I have a John Deere 990 with a 300CX FEL and an 8B BH. The specs on this page Specifications - 8B Backhoe talk about the lifting power with the "Boom lift ability (dipper arm and boom extended, lifting with boom cylinder only, weight attached at bucket pivot) 313 kg and 689 lbs. (Just a note...

Looks like a really nice winch. I wished I would have seen it when I was looking to purchase one. I agree with North to Alaska, it would be great to hear a one year review.

That is all well and good if you can burn. The state I live in you can't burn. So than having a chipper is really the easiest way to take care of things easily.

I own a 990. it was used with only 75hours on it when I purchased it. I am curious to know what you finally settled on for replacing the clutch etc and what the final damage was. Thanks

How do you like your Frostbite Log grapple?

I miss Old Path too especially reading and watching his posts. Cancel culture just getting more and more. Even 20 years ago it would not have been an issue. I understand his reason for leaving and I admire his principle for doing it. It will only get worse as time passes. History tells us that.

I have a 22 y/o 044 and it has the old caps that you can put your screwdriver in to loosen or tighten. I like that much better!

Yes I believe the LV0007X have to do with the model number and then the 6 digits after is the s/n.

This will show you your s/n ranges on the 7 BH https://partscatalog.deere.com/jdrc-services/v1/image/getAttachment/7__8__8A__8B__10_and_10A_Backhoes__Introduction?a=1151&br=1061&locale=en-US

If you go here you can see the parts https://partscatalog.deere.com/jdrc/navigation/equipment/68102/level/2/snp/MzYxNjYyNDpDSEFQVEVSWzEwNjE6I0JVU0lORVNTX1JFR0lPTiwyOTE3OiNDQVRBTE9HLDY4MTAyOkVRVUlQTUVOVF0 This also lists out specifics with some of the simple drawings showing you the frame and...

You can also download the 750's operator manual from there to if you do not have one. I would attach it but my guess is that it will be to big at 38MB. On pages 37-41 it has the hydraulics info for it. The 7 BH manual also listed info in it as well.

I think that this manual should cover you. It covers s/n's "130240 -" which means that s/n and everything above. I am assuming you know where to get the manual but in case not you can find them here Search for Equipment Publications - Technical Information Store The other thing is that you...

Why do you want an electric winch on the front of your tractor? I thought about doing that at one time too but then abandoned the thought as I learned about duty cycles on electric winches and also the fact that the FEL is on most of the time. I am just curious what you are thinking about...

I keep it disengaged until I need it and then engage it. When I put it away in the garage I always make sure that it is disengaged.

Woodland Mills chipper and Igland winch arrived yesterday.

I found this 2001 Jinma 395i TLB tractor on CL for 14k OBO. the ad says that "It has a brand new whole complete 35hp.diesel motor alt., injector pump ,starter ,&more" You can see it here https://newjersey.craigslist.org/grd/5404939688.html. I have a friend who is possibly interested in it...

I just saw this listed on Craigs list in upstate NY. The seller says that they only used it 3 times. The picture looks like it is in mint condition. The paint is not even off the bucket or the stabilizer feet. I thought I would point to the listing just in case someone is looking for one...

My friend and I bought a used Splitfire that was only about 2 years old. It is a stand alone with a Honda engine. We added the lift to it and that is great to have. I agree with your assessment of the Splitfire. I don't think that I have ever used anything as fast especially if you have 3...

Guys, I am going to put insurance on my tractor for theft etc. It is not that expensive at probably somewhere around $150/year depending on its present worth. It covers things like trees falling on it, lighting stricking it etc. I know the home owners policy covers it but not for all of those...

JP I posted these on GTT for you as well. Here are the pictures on my draft links. They look very similar to Sal64's but mine as you know are of the later s/n units. https://plus.google.com/photos/116078893095334358419/albums/5850945316074369377?authkey=CMei0t_W2oDZ5wE Below are the JD parts...

Here is my 990 with 8B

Does anyone on the forum own a 990? If you do would you be willing, at your convenience to do some measurements on your ROPS. I purchased a 990 and the previous owner had cut the ROPS so that it would fit in a 7 foot garage. I am trying to determine how much they actually cut off of the ROPS. I...

Please take a look at these pictures. I am not sure what this extra hose is for on the 990. It is connected to nothing. However the decal states that it is "from remote valve". The one labeled "to remote valve" goes to the 8B BH and then the lower one is where the 8B connects to the system...

I am changing the transmission fluid on a JD 990. I have pulled out the suction screen and it has some gunk in it at one end and in other places etc. The manual says to remove it and clean it with a mild solvent and then let it dry. Does anyone know what they mean by a mild solvent or do you...

Hello all. I am new to this forum. I grew up with tractors and am now 51 and am looking at purchasing one. I own over 2 acres and it is wooded and has a lot of rocks etc. I want to build a barn. I burn about 6 cord of wood a winter. I have found a 2005 JD 990 MFWD with 300CX FEL, JD 8B...