Search results

Removed this plug and found this, going to chase it with 14mm tool, does this look that bad? Looks like I can save it without using helicoil. Kohler 25hp twin, sux because I just took them out last week and it was fine, wtf? Replacing with Champion 71/RC12YC

Got the S-12 coming with complete kit, bracket, shield gaskets, $141 on Amazon, hope it works.

Need muffler advise for my Kohler CH25S 68624. 24 786 12-S vs 24 786 11S? Is it just the different sides of discharge or is flange sizes different? Older machine and muffler is done, have it off and looking at $99 to $170 to replace but need to know which one will work. I will say that the OEM...

I think it may be just that the S-12 discharges from left and S-11 from right.

25hp Kohler CH25S 68624 muffler replacement. 24 786 12-S vs 24 786 11-S ??? Is it difference in flange size or what? Kohler site has both but can't tell difference except 12-S is $50 more? Mine flanges are 2" hole to hole overall 2 5/8" I heard some newer ones will not fit older units, this is...

Either will fit, like R4 little wider tire but yes need R4 rims too can't use R1 wheels with R4 tires vise versa

Just put new fronts on, sits great and did directional so one is inside out, no difference is width I can see.

Just got these brand new wheels and tires, guy said he had 2 sets and thinks they were lefts and rights now that I pointed out to him, so he sold the other set as 2 lefts,,,daaaaaa! I'm thinking, since I have 2 rights, put left on backwards and right on regular just for proper direction? Will...

Just thought, What if I put them on backwards would it widen the stance in front?

23x8.5-12 are getting worn mostly from past owner, found 2 brand new in white. Seem to be both right side wheels? Does this matter or should I remove tire and turn it around? Guy is asking 200 for both. 1st photo show treads going same way on both showing inside of rims. ????, I think this price...

Yeapers! Thx, had it in my cart before I called before ordering it, $1399 isn't bad though.

Just called Mechmax.com said ad is fake!!!!1-315-750-4008

So this $1400 one can be got for $990? Did u order? Is this SG24? Showing $1399 on MechMaxx site, is this legit site for $990??

Got my 4' rake attached to QH now I found a 72" for same price a Tartor made by Tractor Supply. Wonder if that's too big for Branson2400? Paid 300 for 4' and 6' is same????

Mine came the same way wrapped in plastic but everything works!

The rake is light and could just hook it to 3 point but would be nice to have all attachments used with QH. QH 29 1/2" rake is 21" Believe extra long pins from Rural King at 5 1/2 usable end 8" overall should work.

Brush cutter hooked up good to new Speeco QH it's the biggest heaviest piece I have so that's great. Box will have to move mount and support arms, no biggie, but my 4' rake pins are to short. Which bushings or extra long pins can I use? Need about 2 inches more each side? 5 1/4" now, need about...

True, still would need bushings for Pats.

Picking up my Speeco QH Monday but just saw great videos on Pats Quick Connects, man! should have got those instead, I have some older stuff that may not work with Speeco.

I watched "Dave Knows How" on you tube that shows how to use QH with older non QH ready attachments. Guys knows his stuff!

I'm going to order it and if I need this adapter I can make it work. Also some 3/4" pins to replace bolts on hook to adjust up and down quicker if needed. Thanks! All my attachments thus far, don't think I'll ever need a tilter. Rake is 4', 28" from pin ends.

I found it Tractor Supply, want to make sure it will work before ordering SpeeCo Cat 1 Quick Hitch Adjustable Top Link Bracket 4.8(33) Item # 2531920 $170.99

You're saying the hook will fit under #10?

Good info! I have a rake, box blade and rotary cutter. Concern is cutter. My RC5 may need a clevis/stirrup, see photo. Thoughts?

Is it true that SpeeCo is the only Cat1 QH not requiring bushings? Can be had at Tractor Supply for $170.

Thx, asking 250 since I'll never use it

3 point disc, got in a deal, how much are these worth? 3 disc of 4 one set missing, weighs a ton.

What are these disc worth? Has 3 of 4 one set missing. Listing for 250 on MP and people are calling like crazy!

OIL We run 15w40 cj4,ci4 and newer ck4. Hyd/Hst we sell gulf transcrest, this is a UTF/MTF oil. A good high spec to look for is JD20c or Kubota UDT Never use a AW or the out dated 303. Front axle 80W90. Hope this helps and enjoy your new tractor.

Why does Hansen Equipment say NEVER USE AW FLUID in his post?

Yes, just done at 350 but I have to repair an o ring and may lose lots of fluid. The o ring is on dipstick mount, 2 o rings. Sorry didn't make myself clear, Manual says TDH 1893 but I read that that AW 46 or Mobile 424 replaces it. I'm using JC20 to top off which I use on my small Kubota. Bottom...

I see Texaco TDH oil, 1893 in one manual and think no longer made. I see TSC AW 46 or Mobilfluid 424. Have a small leak on dipstick o-ring and might as well change filters and check screen. Will AW46 hurt warranty? What filter are u guys using? FE9105000A TA00616986A Also going to use 15/40...

I'm in Fl, may try to trade it.

Picked up this 5' box blade for $200, 2 way rear blade, (if that's what u call it), plus got a harrow for free. Have no use for harrow but love to trade for a rake or cut it down and make a drag. Box says JBar Corp Dragon F-7319. I love this thing, better then a ballast box.

This one is listed as $325, Iron Craft is $750 for 5' Ebay has some for $300, thoughts on quality for home owner use.

Kubota G1800S all wheel steer 16hp 3 cylinder diesel with 3 point. 54" deck. Separate 2 way valve lift for 3 point vs deck, with original single function valve as spare. Full shop manual from 1st owner. Manual lists all parts, all diagrams, all repairs instructions. Push Blade, bagger with grass...

I'm needing a rake as well and saw this. Seen someone mount this to a box blade, box blades are cheaper and more available then rakes so maybe a way around expensive rake. Of course mounting on bucket would work but rather pull from 3 point then back drag from bucket. Thoughts? This one is 52"...

WOW! I thought said each, thx

Not bad for $80 I got my o-ring washers in, no more leaks and now have a few in the kit for future. Turned 3 point around as well. Seen a full set of Kubota's for $250 on MP but I need a box blade next.

Just went over 400 and they just did full service before sold. Yes, top off after fittings repair this weekend. Bought it at 394hrs. Where did u get those pin links?

The service manual sucks it says use 10w40 oil but why not list 15/40 diesel oil? What's best?

2 things, is this fluid ok for this unit? I use it in Kubota G1800. Also I think the 3 point arms are backwards. Just ordered bonded dowty washers to fix leaky 3rd function valve.

Just ordered these. Hope they work.

Got it THANKS!

These I assume?

Looks like 2 different sizes. Did tighten but still leaks slightly, where does ones get these washers?

They tell me it's a BZ00723B

2021 Branson 2400H with push button on loader stick diverter valve. Leaking at fitting. Are these WR Long or factory from Branson? Looks like crush washers like brake lines? Or O rings are bad.

Mine is 2021 right before TYM took over but same engine as T246 or T25 I think, has no regen/def so that little smoke I heard is normal, so thanks so much. About engine RPM, so the linked throttle acts like a governor of sorts and normal? Any advantage/dis of either linked or not or just...

I passed!

I changed fuel filter and added this. Runs good less white smoke if any. QUESTION? Who uses off road diesel? I use it but should I use the more expensive less sulfur? Also, silly question, set throttle @2000 for chores and such but when I press the forward pedal all the way down it goes to 2500...

Weight is my concern with BL100S looks like 1300lb capacity. Catawba 54" does not have any lower teeth, but weighs 212lbs, $2200 Catawba 55" nice teeth 2-6" cylinders grease fittings but weighs 300lbs, $2600 RBG3-54 nice teeth weights 238lbs but cylinders are on top. $2500 Dealer told me to go...

My decision comes down to weight with a BL100 FEL rated at only I believe 1300lbs. The Catawba 54" is 212lbs but no bottom teeth (2)4" cylinders, grease fittings. $2200 The Catawba 55" is 300lbs and has bottom replaceable teeth plus 3rd lid arm, (2)6"cylinders, grease fittings. $2600 WR long...

What machine is that on and what loader? I have 2400 w/BL100FEL

Talked to rep and RBG3 are on top and yours (Gladiator) are in back but don't want all that weight. Thanks

Cheap ballast boxes for under $200 and Quick hitches? For under $200 on Amazon or even WalMart how bad can they be if I'm just going to fill them with cement? The Quick Hitches seem to all have same load rating of 3k so what to I look for between Titan @ $385 box,QH @$209 Land Pride or Tractor...

I'm looking for one too, I have the same factory divertor on my 2400H with BL100FEL. Both female fittings. Is that one the RBG3-56 @238lbs? The web site shows cylinders on top not in back, if in back I'm interested! I like the Catawba 54" @212lbs or 55" @305lbs Looks like has a few more teeth...

Yes, only start up then clears up.

I know it's not a TYM but same engine 1.2 l A1100N2 Kukje. 2021 2400H Known as a good motor but this is what mine is doing at 395hrs. Saw one video of a guy that said injector timing was off and heater was never working? Had to do a "Top End" service. This white smoke at start up is concerning...

Yes figured it out Tinhack, thanks, dealer told me have to change out gear, I'll be looking for a slip clutch go this going forward. Thanks again!

Was told I do not need a FLEX Link for this cutter that the arms move and eliminate the need for one? Also, round shaft so no slip clutch will work, must change out shaft. Just gonna get a few extra shear pins.

Found a few used ones, plus some new, thoughts? Branson2400H Land Pride 0548 $1200 I think 200lbs no longer made CID CTGR60 $1000 334lbs no longer made SERG72 $1400 409lbs would like the smaller SERG48 single arm looks cheap. Carolina 54" 250lbs $1500 Mr. Conner's price to me!

Shouldn't it be like this

Also, I see a Land Pride 0548 grapple with 2 female connectors? Do folks just change the fittings to work?

Question about this factory installed 3rd function by Branson? I heard they are diverter valves not really true 3rd function. Does it matter and why did they use 2 female connectors at the point of connection instead of one female and one male like all the kits out there? Do I simply change the...

So you wouldn't go for the 52" at Conner's for $1600? I have Branson 2400H 50" bucket I believe.

What the L stand for? Just bought a 2400H 2021 model.

2021 2400H

What deck are u using I see some on Market Place for sale and might pick one up just for kicks.

Do all 2400H have mid pto, mine has the level but never checked to see underneath. Delivery is Monday. If so, what deck does it take? Thanks

I just got one and didn't look to see if mine has one. It has the lever for it. Do all of the 2400H comes with mid pto or is it an option and have the level just as standard set up?

Went for 16k today

Checked the auction in Fl today, B2920 FEL, Belly mower 585hrs sold for $8800. Not bad! The L47091 went for 16k

Told me they will do all warranty on it as needed. Rope is nice chains would be better but have some here. Not sure if I need a edge on the bucket just yet, looking for a 48" grapple as we speak since I now have a 3rd function with quick connect on loader. He only had a 60" in stock. They are...

I guess ur right, if there is a bend in that bucket they could bang it out while installing it.

Thanks I will. Here the Woods

Yes, it's been a long search. Glad it's over, hopefully this will last awhile. Thanks again you guys!

Smaller in person, I'll add a lip myself, holes already there.

Let's say out the door tax tag everything under 10,800 hoping and thinking that's a fair deal?

I negotiated let's say for discounts all around, half on hog and delivery. Bush hog is Woods 5' less then a yr old looks brand new. I don't want to give myself all the credit, I'm sure they wanted to move this machine and they made it easy, seemed very honest about the whole deal. I won't...

Thanks for all you're help, delivery is Monday! Ran good, everything works well. It was definitely used but not abused. Powertrain warranty until 7/27 sealed the deal! Never owned a Branson with this engine.

Machine has warranty through 27

Bought the Branson this morning throw in a Woods 5 ft bush hog dealer was really nice

Yeah, gonna look at 2400H first tomorrow then JD 755. Talked to JD owner, said after he topped off hydro after steering was loose...? ... found small puddle in garage under tractor NEXT day, buddy told him he may have over filed it? Who knows? Apparently we are all looking at same ad...lol...

Of course when I finally find a good tractor something else always shows up. This 2021 Branson 2400H with 3rd function,340hrs with some warranty left. Asking $9900 Good grief how does one decide!??? Hate to ask but how would this compare to JD755?

Just emailed him, thanks

Saw that nice tractor, probably go for over 12k The Kioti DK45 looked good. I noticed on the 755 the FEL bucket has release pins not bolts, I guess that's good thing if I could find JD attachment because those are the only ones that would fit? Just talked to 755 owner, all new hoses, light use...

Thanks leaning that way. Hard to find 3rd function parts for these old 755's

Don't need mower deck or the aerator on JD but could use either for ballast. Neither has QC so I was going to do Add a Grapple which mounts to bucket, single arm. The weight of a grapple on both these would not be good with lift limits of under 1000lbs IMO JD 7k B7500 9k

B7500 seems a little newer and parts are not proprietary. Similar lift, 3rd function would be easier with B7500. JD has 700hrs B7500 700hrs New cylinders on B7500, new hoses on 755.

Assuming the 755 is very close to Kubota B7500. Looks like parts are easier to get for Kubota. B7500 is lighter

Thanks! Anyone ever try to use deck cylinder for a single circuit such as Add a Grapple? Single arm on top of FEL?

Use this for single function?

I will not use it for mowing I have a zero turn and other mower for that. Just need to know if a 4' bush hog will work for scrubs and such. Seen youtube guys using the heck out of bush hogs on these things. *****Also, can the mid mover deck lift cylinder be used for a single circuit control like...

Been looking for a cash tractor for awhile and looked at many. Lot's over 10k I like the 955/855 and worried 755 will not do with a 4' bush hog since only rated at 15pto? Found a clean 755 with 700hs FEL and 60" deck. Asking 7k. I may use it 30-40 hrs a yr if that. Thoughts? I know these are...

Gonna jump in here. Looking at a 755 w/FEL and 60" deck. 700hrs and looks very clean. Will not mow much just to move stuff around and bush hog some. 4' bush hogs are rated at 25hp so how about the 755 rated at 15pto? I've seen lot's of videos of guys running the heck out of bush hogs and even...

I agree, will check turbo for leaks and clutch play.

Has 1500 hrs and asking 6k. I don't think the guy knows what he has. Going to try to see it tomorrow. Any trouble with turbo's on these?

Guy has a 1998 shuttle model for sale, is that the turbo model and are they any good?

1998 MF1540,shuttle, can't find it on TractorData says started in 2005? Is this an different model that is turbo charged and are they any good?

Just got off phone with dealer they have or can get anything. I think sore grapes. Any problems with 2013 3616 model? No DEF/Regen which I like.

Looking at a 2013 3616 700hrs and lots are staying no parts available? Is this true or just sour grapes? Nice frame size bigger then Kubota in same class and better lift? What gives?Log into Facebook

Anyone have problems getting parts for their Mahindra. Told parts are not readily available for any models!? How can this be, biggest builder of tractors in the world~!

How about this one? 3616 Shuttle 700hrs no def just DOC. Has ur been ok? 12,500

I passed, it was worn out!

https://www.facebook.com/share/14HZSBD43K/

Just talked to owner and says no regen on this unit made in Japan. He was a dealer and says these are real good units. Is it true the loader is mounted to the block or frame?Log into Facebook Check up video and pix.

Is it rue that a 2013 3616 has DOC not REGEN? Plus the shuttle is true gear on gear with no clutch per say? See one with 700hrs foe 12,500. thoughts?

Why do u say that? Called me back and said it's ready, inspection just done late today. Changed the belt is all it needed.

Check it out! Saying have to change seat then do inspection before they can sell it next week. WTH? been for sale for awhile?

Saw ur comments on OTT thanks! Going to test it tomorrow. Will try the you tube thing. I'm handy and work on all my own stuff so as long as this forum is here I think I can handle most issues, just don't want to buy a lemon.

Sent video and ran well, 3 point was smooth but operator didn't lift the tractor with the bucket but it moved good but jerky. No smoke and sounded pretty good. Looks ugly but 1500hrs think I should be ok.

Found another one! 2004 L2800 1500hrs, got them down from 10,500 to 9k out the door. Yes, it's from a rental place but they say they do service every 250hrs? It's rough but it's all I need. No R4's but not bad for homeowner use. No quick connect bucket but may add 3rd function down the line...

Going to see it later today. Has video of starting with no smoke at all, white or black. Belt squeak when idled up but no soot that I can see.

Yes, plus box Is 2600hrs a lot for these?

Says he has brush crusher, bush hog and box for extra $2500 on the Case.

Is the Case DX31 same as NH TC31, specs show exactly same 31hp, great total flow 12.3gpm, bucket 1250lb lift. 2006 model with 2600hrs, seems high. Asking 13k All fluids just done and 4wd just rebuilt. Compared to 2003 TC33 with bushhog, box and trailer for 14K with 1600hrs 7308 FEL under...

I've got a guy selling his 1720 and 3 point won't move. Could this be same thing or do other parts wear as well? 1800hrs and stuck in up position? Is it worth 7500

Not yet guy is being a D*** Writing on hood indicates it was a auction tractor, words on hood reads "no water" & lot # I asked him but no reply

This one has one installed already!

I see on Tractor Data that the T254 has less lifting power, weighs less. T264 is s/a T234 but all have different engine, Yanmar, Mits, Kukje. Same tires size. My thinking is buy a used one for more then half the price of new with same features as T264, 1907lbs, 1380lb FEL, Mits motor. Only...

Is this a sub compact? Is it close to Bobcat 2025 frame wise?

Yeah, he does not have arms and won't tell me about front damage.

Thanks

Thanks, didn't know S. Korean made that's a lot better!

Thanks for info, didn't know

Hesitate to buy a China made tractor but can't afford anything else. Found this TYM T234 with 285hrs 3rd function, no headlights asking $8500 Kioti, Kubota, even 10-15 yrs old, way out of my price range for home owner to put 20-30hrs a yr on.

How has it held up, I'm hesitate to buy a China made tractor but I can't afford anything else. Found 2017 with 285hrs with no headlights asking $8500 with 3rd function.

Front dash looked changed from dealer so I passed, private owner and no XTRA Power under L3400 so they were lied too by dealer, it's like "06-07

Found an 2017. How has urs held up? 278hrs asking $8500 front headlights are gone.

Does urs read "XTRA Power"

Wow! You guys know ur stuff! 2nd owner so differently will check serial number. Says they have manuals, but will test drive it today. I current great credit but no credit, go figure so buying new is difficult. If I did buy new would go for 25hp or less with Kioti CK2620HST. Thanks, also mention...

Is the DT just the older version of a shuttle? I see lots of Utube adjusting clutches but with low hrs would think this should be an issue until later?

This L3400DT beauty is a 2009 with blade and bush hog, DT with stick in the middle. Any trouble with these? ONLY 258hrs!!! Says 3 range but shows hi/low? Are these better then Hydro? Asking 16k I also found a 2006 Kioti DK 45s with 1300hrs rear remote for same price with more attachments but...

Just part time home owner stuff, 5 acres, clearing some brush, moving dead trees. No heavy duty daily use. Is the TC33D equal to say the 955 of it's day? I like the fact that the DK is more then I'll ever need and could resell it easier. The rear remotes and better 3 point arms just to name a...

Think I'm close but these 2 are my choices so far. 2006 Kioti DK45S with rear remotes and 7 attachments, bush hog with slip clutch, box, forks, claw, rake, rear blade and rear plow. Quick connect bucket. 1350hrs 2005 NH TC33D with trailer, bush hog and box,1600hrs and counting being used daily...

Which one would u buy TC33D or 1925? Both Hydro, same hrs 1500each, price is 14k for package deal TC33D or $7800 for 1925? Believe this are the same just different Gen.

Sold before I could get there!

This one looks like a winner if I can get to it in time. CK30 HST with FEL 750hrs and in mint condition. PRE REGEN! I'm guessing this is a big plus? Asking 10,500 but has people coming all day tomorrow have to get there by 9am. Thoughts? I drove a DK45 shuttle and built like a tank but want HST

Sorry, 3rd function/diverter valve for possible Add a Grapple atop the bucket. These look like 1st gen then TC, Boomer and now Work Master. Guessing size equal to JD 955 in it's day? Thanks

I don't need much of a tractor, just around the home 5 acres clearing a little brush hog, 25hrs a year. Found this one for under 8k, thoughts. I know it's older and bucket is pinned and bent. I know about Tstat removal for over heating but overall thoughts with 1500hrs Hydo drive? How hard is...

Got him down to 2800....is this tractor worth it?

Looking at a 1800s with front blade 54 inch deck leaf collector, rear 3 point, wheel weights, snow chains, why in Florida I don't know maybe was up north at one time,,, Under 700 hrs, the thing is in great shape but wanted a small fel for my 5 acres for moving stuff around,,,,what do you...