Search results

Well, as it turned out, I was called away from my tractor today. Maybe tomorrow.

I have a Kioti CS2022 with loader and belly mower and third function. The loader has skid steer attach. I bought it in October of 2023. It has right at 90 hours on it. The local dealer did the 50 hour service. It has done everything I have asked it to do. I am selling it because of health...

Thanks fer the image. I'll be pulling it out today.

This is the only plug I can find. I am pretty sure it opens into the differential housing.

I will try tomorrow.

I am mounting an auxiliary, two spool, control valve on my Mahindra 5145. It is an open center system. I have to run a hose from the "t" port on the auxiliary valve to the fluid reservoir, which is the transmission/differential housing, on the tractor. I have looked more than once and can not...

Yes, Sir, that is it. I think I have it all figured out except I have not located a place to connect the return line on the tractor transmission/rear differential housing. I sure hope I am not intruding on this original post.

I am using a PRINCE 'MB' MODEL MB21BB5C1. It came with the Flail Mower that I am trying to put on my tractor.

Why can't I open your pictures? I am trying to install a two lever spool valve on my Mahindra 5145 and I think this thread will be very helpful if....

Friday April 11, AM, 2025 the local dealer returned the deck. They had a hard time installing it. The mechanic got a pry bar and a 4 lb hammer and laid down and went to work. He finally got it installed. ?? He blamed it on the driveway not being level. Later that day I decided to try out the...

History of my Mahindra 1126 June 14, 2024 (Friday), dealer (60 miles away) delivered the Mahindra 1126. It had 6.6 hours on it. I am still waiting on the Mid Mount Mower. I bought from here cause this was the first one to come available in a 100 mile circle of me. June 18, 2024 (Tuesday @...

O K, thanks for all of the helpful positive posts. I appreciate the negative posts also. I find something useful in any response. The shaft is off. I used a ratchet strap attached to a tree with the other end hooked to the shaft, just before the U-joint. With a hammer I tapped on the strap hook...

You are correct.

I agree.

I bought a new 2024 Mahindra 1126 tractor. I have put around 70 hours on it. Until this past Saturday it had never had it's PTO stub uncovered. When I took the cover off the stub looked very smooth and black. I intended to connect a new 48" rotary cutter to the tractor. Every thing looked good...

My thoughts, exactly. More of my thoughts, the fire probably helped the land more than hurt. As far as the trailer house the replacement value of it and contents is something to work out with your neighbor. Always keep in mind that you may need your neighbor's help someday. He did not have to...

Update. The work was completed on Feb. 10, 2025. Due to weather it was delivered on Feb. 13, 2025. According to the paper work the tractor came into shop 11-14-2024 and was ready 2-10-2025. It was gone from my place 91 days. I did have them do the 50 hour service while they had it. Everything...

what does LT, NH, MT stand for?

December 3, 2024, The local Mahindra dealer picked up my Mahindra 1126 tractor with M1160 Mid Mount Mower to do the fifty hour service. I had several other complaints about the tractor & mower. I had previously talked to the dealer where I bought the tractor and they told me that everything I...

I have a belly mower on my Kioti 2220. The mower lifts and then the rear arms lift.

They are afraid that if you have a shop manual you will do the repairs and they will not be able to rip you off in repair work.

I have a hard time sleepin at night cause I am tryin to decide what to repair tomorrow. We been at this place 47 years now and started out goin up hill at a good pace. At some point in time we started goin the other direction. The things that need fixin are pilin way above our heads. Now we are...

I called the dealer and he said he did not know the answer to that question. He did not offer to find out, either.

I have a 2024, 1126 with a mid mount mower. If I operate the loader when mowing with the mid mount mower, the mower stops working. As soon as I stop using the loader the mower starts mowing. Is this normal for this tractor? It does not happen on my 2023 Kioti 2220.

Does anyone own a Mahindra 1126 sub Compact Tractor? If so, does it have the mid mount mower installed? Mule

I got it back (July 15, 2024). They picked it up on June 16, 2024. The mid mount mower is installed. The mower sounds like everything has no lubrication at all. Not like a blade scraping metal. Like dry gears on dry gears. They said it was normal. i don't think it is normal! I did not get any...

I have about the same exact situation. I have a Mahindra 5145 and would recommend it to anyone with your type setting. I have a grapple up front and a flail ditch bank mower on the rear. I use it in the woods as well as to move 5x6 round bales of hay. I move the hay with nothing on the rear. I...

Well, not so good. I called this mornin to let the dealer know it needs to be worked on. 1 - Hydraulic fluid/oil leak 2 - Noise at rear when PTO is turned on 3 - Diff. lock will not disengage unless I pull it up 4 - I can't operate the park brake 5 - With loader arms empty the right corner hits...

I a simply telling how I do it. Right or wrong ??. My diesel engines have never give any trouble of any kind. I have worked on and operated equipment, of one kind or another, with Diesel Engines since mid 1960s. I bring them above idle only when I need more power. I do not run at any RPM...

It is new. It feels good. Much better than the Kioti CS2220 that I have. BTW, the Kioti is for sale. 70 hours with a WR Long third function.

It was delivered June 14, 2024 @ 3:15 PM. The dealer installed a summit third function. I am waiting on Mahindra to send the mid mount mower to the dealer.

For sure the dealer makes a big difference in your tractor experience.

Everyone has given you good advice on tractor size, but that does not answer your question about sub compact brands. My opinion on front end loaders is that a utility tractor has to have one. Preferably with skid steer quick attach. I will try to answer your question with my opinion on sub...

I think I am gonna have to use the "t" to tank port on the aux valve to return fluid to the tank. In the case of this tractor system the tank is the transmission rear end housing. I have not even looked at the tractor today, but it is on my mind.

I am very interested in a Mahindra 1126 with loader and 60" mid mount mower. I am told that the Emax and Max series has been discontinued. I went looking to possibly buy an Emax 20s. It did not make me happy because of the rocker pedal for the HST. My right ankle is not flexible. My gut size...

I sent these two pictures to the dealer service dept. where I bought the tractor. This is what I was told, in my words. "Disconnect the fitting to the left or towards rear (has red dot) from tractor hyd. block. Connect that hose to the "P" (pressure) port on the aux. valve on fender. Run a hose...

In IMG-5287 is the fitting/hose on the left screwed into the power beyond position?

Not yet. I am uncertain where to connect the power beyond port on my auxiliary control valve to the PB port on the tractor. (Did that make sense?) I do not know where the PB port is on the tractor. I think if I was comfortable about that I could move forward.

I do understand that if I can operate the mower control valve from the factory rear remote I will have to install two more remote couplings on the rear of the tractor. One connection for each mower hose. Mule

cbg8670, I tried to duplicate your pictures from my tractor. I also took pictures of the control valve that came with my flail mower. The hoses attached to my only rear remotes go to the grapple. If I connect the control valve on my fender to the one remote will the control valve operate...

To be able to go to this site I apparently have to be a member and sign in with a username and password. Where do I go to join? Mule

Please do that, if you have time.

According to the dealer where I bought the tractor a second remote kit is not available. In reality I can operate only one function at a time, but I dn't want to have to switch hoses to be able to go from one control to another.

I may try, but that is way out of my ability. Greased, yes.

Am I the only person who has a problem with the loader and bucket assembly being sloppy? It seems to have a lot of slack in every pivot area. When I back drag with the bucket is when I notice it the most. There seems to be a lot of slack where the loader arms connect to the loader frame that...

I am wondering the same thing. If I knew which lines to T into.

I got a FH-AGF140 Ditch Bank Flail Mower from Betstco. The hydraulic control valve that came with the mower is a Wolverine by Prince MFG. CORP. model MB21GB5C1.

I have a 5145 with one set of factory installed rear hydraulic ports. The dealer connected the hydraulic hoses for the Grapple to these ports. It works great. I now have a ditch bank flail mower. It came with a two lever control valve. One lever has a float function. My question is; where should...

My leak was at the same place as DaBear3428 said his was. My dealer fixed it when I had the 50 hour service done.

UPDATE! The mower arrived to my place January 25, 2024. The crate and contents are in perfect condition. The weather slowed FedEx down, but, they kept pointed my way. In a day or so I will have a better idea of what has to be done to make the float system operate as it should. I may have more...

That should include the dealer that sold you the tractor.

I agree!

Yes, and still be able to use the grapple while being able to use the mower.

Yes it does. My dealer connected to it in order to operate the grapple without a third function kit. He did this at no extra charge when I bought the tractor and grapple. It is a 2022 Mahindra 5145.

The main reason was the advertised cutting capacity of 4" diameter. All others were advertised at 1.5" or 2". I will use it to keep brush back more than anything else. I could have bought locally but the price was much higher and they were still from foreign countries even if assembled here in...

I have paid for a Betstco FH-AGF140 verge ditch & bank flail mower. I ain't got it yet, but I am trying to understand the 2 handle hydraulic float controller ($575.00 extra) that I bought with it. I was told to buy it in order for the mower to operate as it should. What does the controller do...

Can anyone tell me what a 5145 Mahindra with a factory installed loader and 9 gallons of antifreeze in each rear tire weighs? Thanks for any help. Mule

UPDATE !! I have decided not to get a flail mower for my Kioti CS2220. In stead I will be getting a Ditch Bank Flail Mower for my Mahindra 5145. I think I have decided on a Betstco FH-AGF140. Do any of you folks have an opinion, + or -, about my decision. If so, please let me know. Thanks for...

So far so good. Wily kioti has his place, but I still love Henry the most.

Will a CS2220HST handle a flail mower? If so, who makes one that is compatible? Mule

I bought a new Kioti CS2220HS last month. It sounds fine till I press the forward or reverse pedal. At that point it starts whining. Any time the tractor is moving it whines, the faster the louder. The transmission fluid is on the full mark. It seems to do the work it is supposed to do, it just...

The "lever" on mine is very tight when in the locked position, but the steering wheel will move up & down with not all that much pressure applied.

https://4mykioti.com/schematics/Tractors/CS/CS2220HS

November 8 PM. It is back. I am happy.

If I find a downloadable service manual or parts book I will post it in this forum. My dealer disassembled the tilt steering on mine yesterdy (they said). They told me they could find no way to tighten it up. Their suggestion was to put it where I wanted it and then they would weld it in that...

They seem to be doing their very best to make me happy. They will probably succeed.

Has anyone had a problem with the tilt steering not holding very good? On mine it takes very little effort to move it forward or backward when it is locked as tight as it will lock. My dealer just called and said that he found no adjustment to make it hold better. Thanks for any help. Mule

When is "Q1 of 2024"?

Well? They are going to come get it to do things they said they would, including fill with fuel, it came here on empty. They also have some things to repair, fix, what ever ye might want to call it. The main repair is that the tilt steering will not lock in any position very securely. They are...

I just now searched this web site, www.michironandequip.com. It is not up to date. I am looking for parts diagram for a Kioti CS2220. The parts diagrams do not include anything for a Kioti CS2220. The Kioti CS2210 is not the same tractor. I am trying to understand why the tilt steering does not...

My thanks to the O P for bringing up this subject and to the folks who responded. Thanks www.michironandequip.com. Mule

It was delivered to my place today , December 5, 2023. It came to me without an owner's manual for the tractor nor for the loader. It did come with an owner's manual for the mid mount mower. I do have a few questions to ask the dealer tomorrow. I am sure my questions will all be taken care of...

They also stepped up the price.

On November 17, 2023 I ordered a Kioti CS2220 with fel and 60" belly mower. The price includes chain hooks on each side top of bucket and an installed third function. The price, delivered to my drive way is $18,850.00. This dealer also has Massey Fergusons. I went there to look at, and buy, a...

I agree with stumblinhorse.

My thoughts exactly. I seems mighty heartless to ruin that mych natural habitat to grow crops that ruin the soil not to mention the wildlife that will be killed uselessly because of this. But, what do I know. I only have 20 acres with less than half of it open. I have lived there for 45 years...

I have a 5145 Mahindra. I know what draft control was on older tractors. It automatically kept an implement, such as a plow, at the same depth when going over un level ground. Such as a field with terraces across it. Does a 5145 have that capability? I don't think so cause there is only one...

I do understand your unfortunate situation.

Yes, Sir, I did.

Does anyone know where the clutch safety switch is located on a 5145 Mahindra? If so, could you explain how to get to it? Thanks, Mule

OOPS. Due to some sort of mishap the PTO shaft was warped and the shaft rest was bent down as the cutter was being brought out. The feller did not tell me about this he simply attached it back to the tractor. I had driven the tractor out of the woods, he was going to bring the cutter with his...

I prefer a Goose Neck in everyway except when it comes to hooking up and unhooking. Due to my physical problems I can hook up a BP easier.

Yes, I have an older Craftsman washer. It is run by a Briggs and Stratton engine. The last time I used it it worked fine. I'll be findin out.

Hey, Y'all, It is back at the house. I sure preciate the comforting thought from all. No damage done, as fer as I can tell. They even put the shredder back on, once it got to the house, also. I was told, by their boss to pay what I thought it was worth to me. He said he was just glad to be able...

You would be a nice neighbor to have, but I would not ask someone to take the chance of getting thorns in their tires. I am about 2 hours away from you. Redwater, Texas. A feller I have known for years is sending two of his hands out, this mornin, to pull me out. They will have a Bobcat. As fer...

I fell twice, right after taking the picture. Once forward and once backward. I finally called my Bride and she walked to me and after that I used her shoulders to support me. I stopped often to breathe. When I got to the house I put the oxygen hose in my nose for a while. My heart Dr. says to...

The fenders on a 5145 Mahindra will not allow this.

Will work.

An update, just so y'all will have a better picture. My main drawback is that I am not able to walk hardly at all. I use a walker in the house and a handicap scooter outside. If I could walk and breathe (27 years ago) I would spend a day, but it would come out.

Well, I pushed it a little too far. May have to hire a dozier. Although if I could walk I'd use chains and trees with the loader to get the tractor out. At this point I have the shredder disconnected. If and when I get the tractor out I will then worry bout getting the shredder out. I need to...

SCAM !! When I sell something on the internet it is cash in my hand only. If a title has to be transferred it is done before I will submit the item to the person buying. Every thing is done in person.

Yes, tacticalturnip, I know.

I am searching for a sub compact tractor with a front loader with skid steer quick attach, belly mower, and back hoe. I have a Kubota BX2200 that I use to mow my yard. I want to keep this same approximate size machine. The only dealerships within an hours drive from me are John Deere, Mahindra...

My reason for this post is because the dealer closest to me told me that Mahindra has discontinued those units. They still make the eMax 20S and the Max 26XLT.

Has the eMax 22 L, eMax 25 L, and Max 25 XL been discontinued for 2023?

I have used a 1977 Massey Ferguson 255 with loader since 1994 on 30 acres with pasture, woods, and a creek crossing it that flows year round. The listed hp is 52. In 2022 I bought a new tractor. It is a Mahindra 5145. The listed hp is 45. The same tractor is available in 55 hp, but it has a...

One of the many reasons I bought a new 2022 MAHINDRA 5145.

At what position is a rotary cutter gear box at it's furthest distance from the tractor out put pto shaft? I think my new shaft is too short.

Since you mentioned the front axle, one of the young men who helped me load & unload told me to "watch" for any leakage on the front axle. Said there was one in the shop as we spoke with a broken front axle housing. (that was the end of the conversation). The flat rate garage time is $135.00...

I asked the same question to the shop foreman (or what ever his title is). I actually got no answer other than a precaution. The mechanic was curious also but he did what he was told. I "do" have the air filters that were removed. The mechanic brought them out to me before I left. In fact I was...

I completely agree with you. I feel that most "so-called" safety gadgets cause mo injury than they even dreamed of stopping. The manufacturer of the gadget has become very wealthy and that is the name of the game! (My opinion.)

You are correct. I called this morning to be sure. Plus I was told the part number has changed and the price went up about 12 to 15 dollars higher. But I was told they had several on the shelf and as long as they lasted the price would remain at $108.68.

I keep mine down because of tree limbs. Limbs can, and will, turn the tractor over sideways and flip it backwards. I have had this happen to me more than once.

Had the dealer do the 50 hour service today. The total came to $399.27. This is the the list of parts. 006016642V91 = oil filter 006000455F1 = outer air filter 006000456F1 = inner air filter 006038451V01 = fuel filter 007202702C1 = spin on hydraulic filter 407352R5 = engine oil The price on...

Before I bought I knew what I wanted and did not want. I wanted, basically, the same tractor that I had owned and used since 1994, a 1977 Massey 255. I was looking for more comfort and ease of use with easier implement change. I checked out the J.D., Kubota, Yanmar, and New Holland. I would...

Me neither. What I have is a double disc. That is all I have ever seen, but I have heard talk of single disc clutches. I really don't know.

Which slip clutch is best on a Rhino 172 rotary cutter? Double disc or single disc?

Ye know, the more I think about it I think I have read about other folks having a problem with this. I think I even posted in the conversation. I have looked for it but I can't find it. DaBear3428, I think it was in your thread about the 5155.

:) The coupler slides on just fine now. This afternoon I tried a putty knife to get the paint off, no luck. I engaged the PTO shaft and while it was turning I used a welders wire brush, no luck. Next I got a pocket knife (one I was not fond of) and used it to whittle the baked on paint off, it...

The drive line coupler slides on & off of my Massey 255 just fine.

This ain't got nothin to do with the 50 hour service, but... Have any of y'all had a problem with cleaning the paint off of the PTO shaft? If so, how did you get the shaft clean enough for the drive line to slip on?

On my 1977 MF 255 I replaced my power steering steel lines with hydraulic hoses. The lines from the engine powered pump to the hand pump. I can not get the air out. Does any one have any ideas. I have worked on MF tractors since 1980. I have never had a problem getting air out. Not even on this...

I have 47 hours on my 5145. So far I am very happy. I moved a tree that two of me could not reach around. It fell, yesterday, across my route to the creek. That being in the wooded half of my property. Without getting off of the tractor. With my old 255 Massey I'da had to get off and hook up...

My dealer gave me an out the door price on the phone of $28,500.00. The price did not change when I asked for tire ballast (I was told that they added 9 gal. of antifreeze and finished filling it to proper level with water in each tire.) and a drop down third step so I can get in it easier. No...

I agree with you about the shuttle stroke. Also, I am going to have to add an extension to the clutch pedal. My arms and legs are too short "or" my middle is too large.

What brand of oil do you use?

Well I can't figure it out so I am going to ask. What does "CUT" stand for or mean?

I pull a Rhino 172 (6') behind a 5145.

My 1977 Massey 255 goes longer per gallon, I think.

In detail, what does the dealer do when the 50 hour service is performed on a 5145? Where can I find instructions on doing it myself? I am concerned about warranty. I seems that there is always a hidden loop hole that will void the warranty.

Yes, I do now. Thanks to you. I hope this helps someone else who is looking for one.

I can't find Bob's service manual. Do you have a link you can share?

I would like to have a printed repair manual for the 5145 Mahindra? My dealer told me this morning that Mahindra does not offer one for the 5145 yet. In that case can I get a "complete" repair manual off of internet?

Speaking of the service manual, do you have a printed manual? At any rate where did you get the one you have? My dealer called Mahindra and told me, this morning, that Mahindra does not have printed repair manual at this time.

Yes, mine seems to be bent. It was bent when I got the tractor, although I did not know it. I will have the dealer check into this when I do the 50 hour service. I have 27 hours on it now.

On a Rhino 172 rotary cutter I am not having any luck at removing the bolt that holds the shaft to the cutter gear box. The nut came off easy. I think the bolt is supposed to be easy to pull out. The bolt will barley turn, and then not very far. Is it so rusty that it will not turn? I see no...

I have a 1977 year model 255 Massey Ferguson with category-1 three point hitch. As time has gone by it has become harder and harder to connect to implements. It is no fault of the tractor. I am searching for the best quick easy way to attach to implements for this tractor, and me. I need the...

Can someone tell me what hydraulic fluid goes in the power steering pump on a 1977 Massey Ferguson 255 tractor? I have had no luck trying to google search. Thanks Mule

I am in need of a radiator for a Massey Ferguson 1433v. Can anyone give me a link to parts for this tractor? A good used radiator will be just fine. Thanks for any help. Mule