john deere 3320

How much should cost difference should there be between a JD 3320 and a 3720? I really like my 3320 but need more hp for mowing think grass up hills and a few other jobs. Has there been any know issues with the 3720? Final question, what is the best match that New Holland and Kubota have to...

Does anyone have one on a 3320? Is it better for reducing exhaust odors? How bad is the normal pipe for odors? Looks neat! but does it make it a problem to open the hood? Thanks, rob

Anyone have experience with the 485 hoe on a 3320? I was wondering if it was too big. It weighs 500 lbs more than the 375 hoe which seems better suited for the 3320 although Deere shows both work with the 3320 on the attachments page. Rob

as many of you have seen, i got my damaged 3320 up and running. it came with r4 industrial tires. I am looking to switch to r1 ag tires. two of my r4 rims are slightly bent and would rather spend the money on converting to r1s. Any one have any good ideas where to find some take-offs or a...

I lost all the fluid in my front axle after a 12 hour day of digging and moving dirt with my FEL, I am sure it is just the seal after reading some other posts on here but I am stuck?? I have removed the clip and tried to use an 8" gear puller on the gear but i cant get the bearing to move at...

Does anyone have a schematic for the ignition? I'm not sure if I hooked the new one up correctly. It starts but the glow plug light doesn't come on. Does that mean the plugs aren't working? The dealer told me they sent the right ignition, but there isn't a glow plug position on the new switch...

Just not sure on this one. I need ground to be a little soft to aerate, but don't know if my 3320 with R4's is too heavy. (1620 lbs w/out areator). Just need a little input before I take the plunge. Thanks.

i just bought a 3320 and 300cx loader....2008 models, rolled over and broke hood, bent rops, and ripped one 3 point arm out of tranny and axle case. also ripped top link out. i know i can fix the top link part easy, but the tranny case gets expensive. i'll send some pics once i get it home i...

I have brand new 3320 with a 300cx loader, telescoping draft, aux forward lights, rear work light kit, 2010 model with less than 10 hours for trade. Where is the best place to offer sell/trades? I got the tractor in an insurance settlement and this one is really to big for what I need.

Hello, I have a JD 3320 with the back hoe attachment. I blew a hose yesterday, I am going to get the new hose made now. Not sure where to check and or fill hydraulic fluid. Need to know: WHere to check Is there a stick or is it fill to spill like oil in a generator Can I use any hydraulic...

Hello, I have a JD 3320 with the back hoe attachment. I blew a hose yesterday, I am going to get the new hose made now. Not sure where to check and or fill hydraulic fluid. Need to know: WHere to check Is there a stick or is it fill to spill like oil in a generator Can I use any hydraulic...

Well, I have put 11 hours on the new 3320 in the last few days, so far, so good. The Power Reverser takes some getting used to; I still find myself using the clutch and reaching for the shifter for changing from forward to reverse (must be missing the 790!). Tractor has more ground clearance &...

Just curious about what is involved on a radio install. Looks like i get the speaker kit from JD. Just looking for what is involved on this project.

I just picked up my 3320 cab tractor tonight and I have a question about the hydraulics. It has the diverter and the extra remote for the mid mount and the topntilt set up on it. My question is can this valve be put into a position that will stay put (to run a sprayer pump, etc). Just curious.

This morning I went to Home Depot to pick up a skid of floor tile. There were 40 boxes of tile, plastic wrapped and tie wrapped on the skid. According to the electronic scale on the lift total weight was 2,050 lbs. This was substantially more than originally estimated. They set the load...

I came across a good deal on a 3320 with cab, etc and am just curious if there is a easy way to boost the HP on this tractor-by turning up the fuel pump/chip etc. I probably won't need to, just curious if it is possible or not. I think this is a little bit different motor than the other...

Does anyone know what a JD 3320 was selleing for in 2007-early 2008? I have a chance to buy a new 2007 JD 3320 w/300cx loader power reverser transmission that has been on a dealers lot since 2008. I would like to get an idea of the price from that time frame to see if I'm acually being offered...

There is a 2008 JD 3320 with 25 hours not too far from me. Asking $15,950. No implements.

I am currently working on a trade to upgrade my 2320 to a 3320 tractor. What I am trading in is a 2320 , 200CX loader and 62D drive over deck.I am also trying to include my 48" rear mount Lorenz snowblower, since all I really use it for is a rear weight. Pushing snow around with the front loader...

3320 e-hydro R-4's loaded with RimGuard Less mid PTO 1 rear remote 300CX Loader Hood Guard 61 inch HD bucket $22,300.00 ( without PA sales tax included ) Is this a good price or should I check other dealers ?

Yesterday morning I took the time to install the JD aux. forward lighting kit and warning light brush guards on my 3320. When I was searching on here to see about both kits, I never really saw a complete definitive thread on them, so I figured I'd show everyone my process and hopefully this can...

I was wandering if anyone has had trouble with any of thier paint peeling off the plastic parts on thier 3020 series jd tractors? On my 2010 3320 that I have only had for a couple of months the paint on the right front edge of the fender is already starting to peel off. I just got it back from...

In the spring I want to add a top link hydraulic valve to my 3320 and I need to ask a few questions. I apoligize ahead of time for using incorrect technical terms. I bought the tractor with a backhoe so it has live hydraulics already plumbed and I also bought it with the factory installed 3rd...

has anybody had the desire to extend with a deflection their horizonial exhaust pipe so the bracket doesn't get all black?

I bought this snowblower for my 3320 because the mounts looked like they'd bolt right up. THEY DID! The holes in my frame matched the holes on the bracket from a 4000 series?

Hi guys... Bit the bullet and ordered in a new 3320 open station, w300CX loader, and 59" front mount snowblower to replace my 3202 w300 loader and rear 3pt Meteor blower. Looking forward to a few more conveniences and added loader capacities. Should be here in 2 weeks if things go right. My ...

Got froggy and installed the hydraulic top link yesterday. The outcome is that is works fantastic, but I must admit that the install did not go well. Had a leak and actually bent the cylinder piston rod the first time I operated it with an implement attached, both problems were my fault (maybe...

Does anyone know the kind of plastic used in the hoods of JD 3320? An unfortunate accident has left a crack in my hood; when researching how to repair it, I learn that the kind of plastic material used determines the kind of repair material. I sent a query to John Deere, but have received no...

Hello, I own a 3320 Deere tractor and need a snow plow attachment. Found a used Frontier model number AL1684E for sale nearby but cannot find anywhere on the internet if this plow will fit or work properly on the 3320. The present owner says they used it on a 400 series but cannot confirm...

I have a unique position, I am getting a 3320 hydro, R4 tires, telescoping draft links, extra lights on rops, 300cx loader, 61inch bucket with toothbar - for a fire replacement tractor. I spend a bunch of time working in woods and hate to take a brand new tractor in the woods. Where is the...

Hello Everybody , Finally Got snow plow done for 3320 JD , Took alot of fabrication, any advice please let me know, thanks to everybody on here for your input and advice!!! Thank you all!!!!!

I got 7 1/2 foot western plow for my 3320 I working on my mount for the 300CX FEL. I need anybody that lives in central Illinois to come by my shop and help me fab up a bracket, I don't even know where to begin!!!!! Today I just ordered the brackets from Deere Dealer, they will be in on Wed. I...

I just bought a 2007 john deere 3320 tractor and want a snow plow for my 300cx loader, I can make my own adapter, but need a plow, badley does anybody know ANYONE selling a snowplow for CHEAP????? I live in central illinois please call me at (217) 519 - 2693 My name is Brandon

I just bought a 2007 john deere 3320 tractor and want a snow plow for my 300cx loader, I can make my own adapter, but need a plow, badley does anybody know ANYONE selling a snowplow for CHEAP????? I live in central illinois please call me at (217) 519 - 2693 My name is Brandon

I just bought a 2007 john deere 3320 tractor and want a snow plow for my 300cx loader, I can make my own adapter, but need a plow, badley does anybody know ANYONE selling a snowplow for CHEAP????? I live in central illinois please call me at (217) 519 - 2693 My name is Brandon.

I just did my first engine oil change on my new 3320 at 66 hours and even though the manual says it holds 5.1 qts with filter change, it only took 4.5 quarts to bring it 2/3rds of the way between the dipstick hash marks. Anyone else run into this? Seems odd to me to be that far off.......

Hiya folks. Please be patient with me, newbie here and very new to the world of tractors. I been reading on here as much as I can and it is a wealth of info, even if I don't understand a lot of it. Hopefully I won't bore you but like others, I would like some good opinions on a decision I am...

Hello, I have a 3320, got an err 36 this am and cant find the meaning. Anyhelp?? Also, I have several leaks to address, the macine is about 30 mo old with 125 hours. Any idea if that fancy financing insurance JD makes you by cover anything like that?? I know if I crush it they will fix it...

Hey Friends, My 3320 has a lift noise that occures every time i lift it even with no implement,but loader with one, i can feel the line chatter coming from the pump behind the seat, there's plenty of fuid and have no problems lifting anything it just makes that groaning sound like air is in it...

Hello tractor lovers, I have a J.D. 3320, when i use my rear lift it makes a groaning sound when i pick up and when i put my hand on the hydraulic line that comes from the pump under the seat you can feel it moving,like air is in the line, and sometimes i'll leave a boxblade lifted for awhile...

I have owned this tractor now for a little over two years. For me, this is a record. Here is what I took deliver of on 8/18/07: 3320 Hydro, Turf Tires 300 CX W/ 61" HD Bucket 72" MMM 3rd SCV Remote lines for angle blade on loader Cool brush guard Auto cruise Telescoping lower links Rear work...

A friend of mine is interested in the above tractor. Can any one give me a ball park price on this set up? I'm a orange guy so I'm not familiar with JD pricing.

Hi--was splitting wood for a couple hours yesterday (using PB with hydraulic splitter), shutting tractor on and off frequently, last time it would not start. Got the flickering dash lights etc. After everything cycles thru, get an Err 57 on the dash. I'm thinking battery problem--won't hold a...

I'm going through a change in situation and I'm going to have to sell my beloved JD 3320. Here are the stats and implements... if you guys can give me any idea what ballpark (nearest $1k is fine) I can expect it would help a lot with planning how to do this thing. 2007 JD 3320 - 87 hours -...

Hey there guys and girls, I am new to this site and still making my way through it. I own a John Deere 3320 with E-hydro. It has 70hrs on it now. The book says change the oil every 200hrs. The dealership I purchased it from said that they should be dumping all of the fluids at 50hrs...

Hello, I have a JD 3320. It is about 2.5 yrs old now with about 150 hours. Within the past week I developed a leak in each outrigger, one on the backhoe and one on the right front wheel hub. I have checked the front axle and the level is good, I nned to check and fill the "rest" of the...

I think its time to upgrade the 2320 to a 3320 or 3520 cab model with loader, was first thinking maybe of getting a Kubota B3030 cab due to its smaller size and lighter weight, but was quickly talked out of it due to it being so unstable/top heavy and plus I'd really like to stay with a green...

it has the 300 bucket on the front. Right in front of your feet where it connects to the big round metal arms that bolt to the frame. It seems to float on that instead of being tight. The uprights seem to have a lot of play in them. Is this normal? It seems like it will come lose and bend...

I posted this over in the deere forum but got no replies. I have a deere 3320 hydro and had a small issue while harley raking a customers lot. I was raking and lifted on the rockshaft control lever(3pt control handle) and no lifting occured. I got off the tractor and fiddle around with a few...

Can anyone describe how to change the front wheel seal on my 3320? Wrapped a round bale twine around it. Caught it after only three revolutions, but it took out the seal. Too tight of space in that area. Poor design. I'll pull the assembly off tomorrow. Guessing I'll need to press a bearing...

Hi, I have been lurking for a while, learning a bunch. I just sold my Kioti tractor and have been looking at a lot of Deeres and Kubotas. I narrowed it to either the 3320 or the 3240HST Kubota. I am leaning more toward the Deere at this point. Price isn't really a fact, they are so close it...

Just tried my tiller out today. It seems it is working the tractor a lot harder than it should. I had the depth as deep as it would go and the ground was dry but I could only go .6 or .7 mph. I had a 2305 with a 47 inch tiller and never seemed to work it near as hard. Was wondering if anyone...

Would like to hear your opinion on this. JD dealer has a late 2007 3320 hydro / 300cx loader that has 416 hours. It has been the dealers rental tractor since new. Would be trading in my late 2007 790 / 300 loader, six 60lb factory wheel weights and power beyond with 83 hours. I would keep my...

A stick caught and pulled the connectors out of the plug. Need to know which way the three wires from the main harness match the 3 from the sensor pigtail. Wiring diagram online anywhere?

Why won't my the rockshaft move up or down? The tractor has a 375 hoe installed when I bought. Does the rock shaft not work with hoe installed. opened drop speed valve all the way at bottom of seat. Nothing happens when I move the move the lift/lower lever. No hydraulics noise no nthing...

The 400 hour service of my JD 3320 will be due late summer or fall of this year. I have already purchased a filter kit, two 5 gal pails of Low-Vis hydraulic oil, 5 qts of 15w40 motor oil, and a gallon of anti-freeze. My question concerns the inline hydraulic filters. The owner's manual says to...

Just wondering how you guys do working this tractor hard with the Air conditioning running and rototilling or mowing tall grass. Do you run out of HP or does it heat up? Thanks

Could someone tell me if I should be getting the rockshaft assist mounting brackets and hardware when ordering a 3320 with the 485 backhoe? Thank you

I've got a buddy who's shopping a 3320 and I was wondering what sort of pricing he should be looking for. I'd like to know what the tractor price alone would/should be, but he will be including a 300cx FEL, (and he'll be pricing a tiller too). Thanks for you input...

I own a JD 3320. When checking the oil I've been told that the loader, backhoe, etc. should be in a position where the hydro pistons aren't exposed, and oil is, essentially, only in the tractor. I would think it should be the opposite - that oil should be checking when the hydraulics are full...

Greetings, new member here; thought I would post some pics of my tractor. I go Green!! John Deere for me. enjoy the pics; 3320 e hydro w/ 300cx loader I've had it for a year now; it's a great tractor, but I want to go bigger; looking at a 4120.

I am wondering if there is an easy fix for my 3320 parking brake. I have to pull the button out on the lever before I lift the lever or it will not catch and just flops back down. I am often wearing gloves and have to remove the gloves to grip the button.

Hello all, I have a JD 3320 and it is a great little machine but just curious if there is a way to pump up the power a bit for the front forks. I am moving around some granite steps, 1500-2000 pounds, 1500 goes fine but over that is not-a-so good. Any ideas or is it just what it is? Thanks as...

I have a JD 3320 with a 5ft frontier 2060 rotary cutter. It cuts with ease. Frontier recommends a minimum of 20hp at the pto with this cutter. I am considering upgrading to a 6ft 2072 rotary cutter. Do you think the 3320 can efficiently handle this cutter in all but the most extreme...

Ok, so yesterday I take a few hours to change all the fluids and pm the tractor. In return it decides to throw an error code at me. So I look in my owners manual and don't find too much so I come to the oracle that is TBN and find a thread on code 08. So now I know what's bringing it in...

I have a new 3320 with Cab and FEL (decided to sell my 25 year old 850 for something a bit more comfy...being a semi-retired guy)...have only put 9 hours on the machine...Loader work pushing back and moving snowbanks, snowblowing and some grader work..and noticed that the fuel gauge remained...

thinking of upgrading from a kubota bx2350 and was wondering whats the better buy the 3320 has a bigger motor then the 3520, but the 3520 has a turbo what one would you buy? Ive never drove a tractor with a turbo besides a JD 4320 farm tractor.

I ordered my '08 last year with the 300cx FEL option to give me the flexibility of higher payloads and a more rugged unit, but have come to regret it... I have less than 30 hours on the machine and have had it on two tires three times now. I cannot believe just how much the extra beef of the cx...

I know there is already a lengthy discussion on this in the Customization forum as well as in this forum, but I figured I would give you all my take on this anyway. I have had the kit ordered for about the last 3 month's and finally decided to go pick it up and install it. The installation went...

Anyone know how to find a parts diagram of the 7-iron mid mount mower on a 3000 series tractors on the J.D. website? I've looked and the only thing I can find is for the zero turns.

Will a JD 3320 handle a 6' box blade working road rock or dirt. I am looking at Land Pride or Frontier. I would like to be able to have the box full of dirt and be able to drag it around. The Farm and Fleet ones look pretty light duty but are a few hundred less money. Just wondering what...

I went in town to push snow at my dad's today and stopped by the grain elevator to weigh my 3320. No cab, front and rear filled to the valve stem with Rim Guard, 300 CX loader with heavy 5' bucket no wheel weights and me off the tractor. Rear tires 43x16-20 Front tires 27x8.5-15 Total...

I snapped both of my lift arms in half using my box blade in reverse. I just read that it痴 not a good idea to do that but it works really well until it breaks. How well will it hold up if I weld them back? Has anyone had any success with this?

I am looking to buy a new 3320 or 3520 cab tractor w/fel and a auto connect deck mmm. I wanted to see what everyone thinks of these tractors and about what they go for in price.

3320 Mid PTO. How much for the kit? part/kit number to order? Current pricing? How long to put in? Can anyone email me the instructions to put it in? Thanks.

I was moving some snow and lost the steering. The wheels turned all the way to the left. You can spin the steering wheel but nothing happens. I lifted the front end with the bucket and got the wheels off the ground. Then I could turn the wheels by hand, but when I let go the wheels snap back the...

I've been trying to figure out for days why my rockshaft control level won't stay in the high position all of a sudden - it slides back down to low, especially when the 3PH is up and I'm using the loader. I don't know if it's related, but I found that that the hydraulic line fitting at the dual...

Does anyone know the diameter and number of splines coming off the 3*20 series mid-PTO? Is there a supplier that can provide the couplers to make a driveshaft? I have project I'm looking into. Don't have my Mid-PTO on yet but need to look for driveshaft parts. Thanks.

Guys, this may seem like a silly question to most but my JD3320 is my first tractor and actually my first piece of equipment that ever had grease fittings...wanting to make sure I am doing everything properly including the proper procedure for greasing. Have the gun loaded attach the hose to...

I posted what I thought may be a problem with my 300CX loader on my new 3320 Cab tractor. I tried some suggestions from members here and thought it went away. We are having a snowstorm, about 10-12" so far and still snowing. I just had to go out and clear the drive and the problem is still...

I didn't want to load up the one post with all the pics of the tractor. The one thing I have noticed that it did not have the optional switches for Motion Match and Load Match. Not a big problem since you can step through it with the sequence switch.

Here are a few pictures of my New 3320 Cab that I picked up last Thursday. Since that time I dropped it Friday at my local dealer and they installed the rear work lights and rear wiper kit. The dealer I purchased it from did not have those items in stock. Also on Monday I had the rear tires...

Anyone know if there is a way to adjust the control lever for the 3-point hitch so it isn't so hard to move on a 3320? Mines been that way since new and using a box blade it's next to impossible to slightly move the handle easily.

This new tractor with 80 hrs smokes blue for short period on start-up. Then starts and runs fine all day. Next day starts and smokes blue. Smokes about 30 seconds. What gives? Tractor at dealer now. No verdict yet. Counter man said he thought it might be characteristic of Yanmar TNV88...

I hope some of you out there can help me out with this question regarding ballast weight...I own a JD 3320 unit with a 300cx front loader, a wallenstein chipper, 72" frontier rear blade and a 72" frontier bush hog. The 3320 currently is running with no added weight and no loaded tires. During...

I have a couple Peterson halogen 3x 5 work lights to mount on my ROPS Wht color and where are the terminals the factory kit would plug to? Any online wiring diagrams for these tractors?

I have owned this tractor, 72 MMM, 300 CX Loader and angle plow for just over a year. The tractor has 200 hours on it, the honeymoon is over. I think at this point I can probably provide a somewhat useful review. Background: Here's what I bought on 8/18/07: 3320 Hydro, Turf Tires 300 CX W/...

Any help at all would be greatly appreciated...everyone here has been a great help over the past several months...I have learned a great deal being this is my first tractor so I hope the next series of questions I post will get some feedback as I seem to be hearing mixed comments from various...

Well, I finally decided on which tractor to get to replace my 1972 IH Cub, a practically new 2006 3320. Now when I say practically new I mean I believe it's a demo unit and it only had 10.3 hrs on it when I got it. I got it with the following: -PowrReverser transmission, I didn't want EHydro, I...

I just made the deal on a new JD 3320 as a replacement for my Kioti CK20. The dealer did me well on my trade in and I think I will like the John Deere. My Kioti dealer folded and the nearest dealer is over 100 miles so I didn't see a future in keeping the Kioti. Besides the CK20 was always a...

I'm currently looking at these two tractors to replace my grass cutter and sub for my loader: The first is a brand new 2008 Massey Ferguson 1532 w/ a 9x3 gear mesh transmission, that comes with a L100 loader, rear weight box, & filled (w/ methanol & water) R4 tires. Dealer told me the list on...

Building a ballast box for the new 3320 cab tractor. It measures aproximatley 32.5" high X 24" wide X 16.5 Deep and is made from 3/16" plate. When it's finished and filled it will weigh 1500lbs.

This was on a six month old unit. Couple of weeks ago the tach starting producing erratic readings - would not show full RPM's or "0" RPM when idle, would not follow throttle etc. Tech guy came out and did all his electric checks - found nothing. Took the dash apart and initially found...

Looking for rear tires for JD 3320 that would make the rear of the tractor look wider than the original pare that it came with. I have the 43x16.00-20 R4痴 on the back and the 27x8.50-15 R4痴 on front. I know it takes a certain ratio with all 4 tires to keep the four wheel drive to work...

I just changed my oil for the first time. The factory installed oil filter I removed is a little bigger (longer and wider) and appears heavier duty than what the JD dealer sold me for a replacement. Also, looking into the factory filter it has components the replacement didn't. The replacement...

Hi, newby here. Jusk asking anyone that knows any alternatives on a different make of Hydraulic Suction Oil Filters for JD 3320. Checked price for new filter from local JD dealer and was looking at a price of $100. Its just a filter, right?:confused: Should the price not be a big deal...

I found a dealer that has a 2005 3320 with 15hrs on it for $15555. One owner, an older farmer that used it to run wagons to the field and traded it for a 5xxx. With 3320, 72"mmm, 300cx, and 59" fr snow blower and my trade it would cost me $16195. Let me hear some feedback guys....

Hey all, New 3320 (no cab) owner. Took delivery about a week ago and it will be used on the 11 acres we recently purchased and are putting a log house on. My first projects for the tractor are clearing out where the house will be and a driveway. I got the tractor with the 300cx, 2060 bb and a...

Does anyone know the part number for the rear work light kit on an open station 3320? I looked it up in the parts catalog, but it says the number is invalid. The number it gives me is LVB25547.

Well I'm now going all in with a TLB in either the 3320 or 3520. Both are extremely nice machines and while I've been leaning towards 3520 and have priced aggressively for my area a friend of mine has raised concerns about turbo's. I know blah, blah, blah. Well since I own a turbo diesel...

Well I think I've decided to purchase a new JD 3320 (after lengthy deliberation). I want to put a backhoe on it..either the JD375 or JD485. I was wondering if anyone has either of these setups and could give me some input to help me decide which hoe to get.

Well I think I've decided to purchase a new JD 3320 (after lengthy deliberation). I want to put a backhoe on it..either the JD375 or JD485. I was wondering if anyone has either of these setups and could give me some input to help me decide which hoe to get.

Just curious about price on a JD 3320 tractor with FEL 300c. Tractor has about 50-60 hours and is only 1 year old. Light use brush hog and moving dirt, great condition. Is $10k good, high, low??? Thanks,

Can someone give me some more info on the plug under the seat? Is it wired to the light switch on the dash? Is there a wattage limitation to what it can power? Thanks

Deposit is down on a new 3320 with a few attachments but I was wondering if there are any other options that I should get now before I take possession...so far the build looks like this JD 3320 open with standard seat, ehydro, mid PTO, dual mid control valve, engine heater, rear work light and...

My first post and I wanted to know if this seems like a good deal .I am more leaning towards the 3320 JD 3320 72" mmm 300cx heavy duty bucket $24,738 -7800 trade in 2001 kubota bx2200 60"mmm with turfs 385 hrs $16930 out the door JD 2720 $21930 62" mmm -7500 trade in 200cx...

So, I think I have just about completed my deal on my very first tractor...not sure how well I did on the pricing but after visiting two JD dealers and a kubota dealer I am pretty happy...so here is what I picked up... JD 3320 with the mid PTO, rear work light. 300CX loader with heavy duty...

I have a JD 3320 ehydro with 10 hours on it. I have noticed an occasional drop of oil (not a large amount) on the floor mid tractor to the rear. Mostly when I utilize the rear 3pt lift or by a valve. Is this common with these tractors...I've been told they all have drips here and there from time...

Can anybody out there point me to where I can purchase a single row planter for my 3320. I would like a JD product but I don't think Deere offers one any longer unless I'm missing it. All I can locate are used JD71s on ebay. I have a call into my dealer but in the meantime any help would be...

Great site dont post much,so here goes looking at a 06 JD 3320 150 hrs 300cx, 6' rake,sun shade not sure on 50 hrs service,no mid pto, asking 19,300 too hi or good?? rember this is in Maine your talking highest pricing for tractors thanks

Finally made the decision to go with the 3320 w 300cx hd 61" w cutting edge, woods BH70X w thumb, wallenstein bxr42 chipper, fransguard v3507 winch, landpride 84" rake, woods 72" box scrapper. I think it should be a nice little package and hopefully will meet my needs. I thought a lot about...

Has anyone found an Optima battery to fit the 3320 without too many modifications? My original battery crapped out right after the warranty of course. I have looked at the Optima website but can't find anything that looks like it would work and a phone call to them was no help. Any help...

I recently purchased a 2007 JD 3020 w/300cx FEL from a private party. I am still in the process of getting familiar with the tractor. The hood on this tractor is misaligned by approximately 1/8" vertically in relation to the housing which contains the dash components. It is most obvious by...

Hi, We use my 3320 to launch boats at a marina, i.e. we're pulling trailers (on the road) all the time. Does anyone make a wiring harness to accomplish this, i.e. to run trailer lights from the 3320? If no one knows of an off-the-shelf solution, any ideas about how to get this done? Thanks!

Build tool box rack out of old sawzall box for 3320.

I'm a newbie to all of this so forgive my ignorance. I have decided on a JD 3320 open cab w/ a 300cx fel and a 5' woods box blade and 5' bush hog. One dealer recommends the "new" 375 backhoe and another recommends the Woods BH70-X. I'm confused. Is there an advantage of one over the other? With...

I need help on deciding between 2 tractors. Both are John Deere and both from dealers. A 4410 with 1100 hours and Hydro transmission for $12,500 being sold by a Kubota dealer 2 hours from me or a 3320 with 500 hours for $14,500 sold by a JD dealer in my town with the HydroE Transmission. The...

Hey folks, Looking to buy a tiller. Our garden is a little under 1/2 acre, but we plan to expand a little so I'd like to be able to work up to an acre. Soil has pretty high clay content but we only till in the spring, so it won't be rock hard. My local JD dealer offered me a 665 w/ iMatch...

I just got my new 3320 and noticed that in a hard turn (either direction) the tire rubs the FEL hoses pretty bad (enough to wear the protective sleeve and push it up). Is this normal? Any easy fixes?

Well just before I pull the trigger on a Cab tractor, i was speaking with another dealer just gathering some info and that dealer indicated that they had been advised that if you are going to use a MMM, especially the 72" MMM on the 3x20 series Cab Tractors, that you should go for the 3520 Cab...

I pulled my tractor out of the garage this morning and everything was fine.When I went to restart it 1 hour later it cranked maybe 1/2 turn then all 3 gages in the dash started clicking like a stop watch over to there maximum positions.Engine did not start.I turned the key off and the gages...

Has anyone installed backhoe mounting plates on a 3x20 tractor I am about to pick up a 47 backhoe at a real reasonable price and will need to install the hookup plates

I want to run a hydraulic top link or say hydraulic chute on a rear mount snow blower can anyone tell me if this is the kit I need THIRD CONTROL VALVE OPEN STATION LVB25506, if so what comes with the kit and is it very difficult to install?

Currently, I have a 3320 with a 448 backhoe. One of the things I did not get at time of purchase was the upgrade to the 18" HD backhoe bucket. So far.. I have now broken the second tooth shank on this bucket. The 1st time it was an end tooth so I figured that while pulling a stump it just got...

I am looking at buying a JD 3320, the quote came back in with the tractor being right around $16000 and out the door taxes and all at $24-$25000. This will include the 300cx FEL, Box Blade, Bush Hog and Tiller. Is this a good deal? Also, is this enough tractor to maintain roughly 40 acres? I...

Need Wiring patter for MFWD sensor on a 3320. Or "John Deere wire planning sucks" Clearing out the land for a new house, I ran over a random branch that pulled a few wires out of a connector (IE, the connector is still attached, the wires are not though) underneath the tractor. This has caused...

Hi everyone, I have a question, I'm sure it has been asked before but I am still tractor dumb, I have a JD 3320 w/FEL, now I noticed from the front of the tractor there are hydraulic hard lines running to the rear where they dead end and have a black cover, there are 4 lines, I'm guessing this...

Hi everyone, I have a question, I'm sure it has been asked before but I am still tractor dumb, I have a JD 3320 w/FEL, now I noticed from the front of the tractor there are hydraulic hard lines running to the rear where they dead end and have a black cover, there are 4 lines, I'm guessing this...

After a year of research and dreaming of a new tractor I ordered a 3320 with a CX FEL and a box scraper Saturday morning. The dealer gave me a price I couldn't refuse and the 1.9% for 60mo made a Deere affordable which I thought I would never be able to do. It will be 2 weeks before it gets...

with eHydro and ballast box I am being quoted 20,700. This dealer is traditionally high so I am curious.

The dealer finally drop off the beast and it's about time. I thought he would never deliver it.

In late November after about 17 months of research, reading lots of posts and getting some good suggestions via PM's I ordered a new JD 3320 Initially the unit was to have arrived late December, however, time passed and eventually all the parts and pieces came together. Went to the JD Store...

I am a new member:) , but have been reading the site for a few months now. I just picked up a 3320, and would like to add a facotry(JD)snow blade. Does anyone have one? What model? Price? How does it perform?how do you like it? etc... Any help would be great. Thanks in advance.

We are looking at making an upgrade to either a Kubota B3030HSDCC or a Deere 3320 Cab. Which ever one we decide on will have the following attachments: FEL, Factory Cab, Rear Blower. The tractor will be primarily used for snow removal as we tend to get quite a bit of snow up here. Your...

Does anybody have the vertical exhaust on a 3320? I understand that you have to disconnect it to open the hood. If this is correct...what's involved in the process? Did Deere simplify it? Thank you. Mike

I got a quote today on a JD3320 as follows: JD 3320 w/eHydro, R4 tires, Agco alum. sun canopy, 300CX bucket, 1560 5' box blade, and mx5 5' rotary cutter for $23,133.60. How does that sound for pricing? Just curious. It seems to be a pretty good deal, but I don't really know that much about...

Just left the dealer and told him to order the 3320, 300cx, 72 mmm and 655 tillers for 22,150 plus tax. He gave me 12,050 trade in for my 2005 196 hours, 62c mmm, 210 loader and 647 tiller in very good condition. I hope I at least got a decent deal on my trade-in. I went back and forth for a...

I was looking at the 2520 but the price was too high for what you get for the money. So I have decided on the 3320 but the size seems way overkill for me I can just imagine what the wife will say when the dealers drops it off and she comes out (pay money to see her face) and takes a look. My...

Thanks for the advice on the tires...I'm going with the R4's. As far the the e-hydro vs. a traditional gear drive...what is the record on the hydros. Is it as durable and will it stand up over time. I hope to have my 3320 for many years. In your opinion, any chance that the hydros will live to...

My back is telling me it's time for a log splitter for my 3320. That's the excuse I'm using anyway to buy a new "toy" for my tractor. I saw a few posts regarding hooking up log splitters but I still have more questions than answers floating around in my head. $650 bucks is a lot of money for...

Hey everyone, I'm looking for a little advice, I have a 3320 and I am looking at rotary tillers, specifically CCM tillers, first off do you think the 3320 will handle a 60' tiller? I live in upstate NY, we have clay and some rock, second the models I'm looking at are the CR60 and the MR160, CR...

First time on the site...thanks in advance. I am hung up on tire sizes for the JD 3320 I plan on ordering. I thought I wanted the R1's at first but they are pretty thin. I have two size options in the R4's...any pros or cons to the larger size. I am looking for the beefier look. This will...

well I'm enjoying the pursuit of a new tractor. I own a b7100 with FEL that has been bulletproof for years. Kubota dealer is close to me but either their machines sell themselves with no help from the sales dept. or they dont think the customer is #1. Anyway, I was looking at a L2800/3400 but...

Hi everyone, does anyone know if the wheels on a JD 3320 can be safely widened. A really nice guy sold my daughter and me our 3320, it only has 40hours on it, and it looks and operates "as new". It came with the climate controlled cab, and a quick adjust rear hitch, and a 5 or 6 foot brush hog...

I am purchasing new tractor this spring for my 30 acre horse farm in hills of virginia. I have 1 mile of hilly gravel road and trails through woods -- and much brush and small pines to get rid of. Currently have Ford 3000 with front push blade and box blade -- 5 ft rotary cutter for about 9...

not sure if I am posting this in the right place but I desperately need some info. Just bought a Speeco hydraulic 3pt Log Splitter @ TSC. Unit came with no hoses. I am about to order 6' hydraulic hoses for it but need to know what the connection is @ the 3rd SCV location at the back of my...

I just recently bought a 2005 JD3320 with a 300CX loader. My tractor has midmount PTO and valve behind. Does anyone know what model of belly mowers will fit this. How hard is this install? I see some at an auction near me from a 4310-is this the same mower? I am looking for a 72" one...

Could someone tell me what bulbs the rear work light kit use? I have ordered 2 of the rear light kits p/n LVB 25547 - however, I need to know what type of bulbs they use.. if anyone with the rear light kit could "shed some light" :D on this I would greatly appreciate it. reason being.. I am...

Does anyone run 2 rear work lights on their 3320. I know the part number is LVB25547 but the dealer says the wiring can only support the wattage of 2 front and 1 rear. If this is the case.. what is the consensus on changing the rear lights to LED's - that would drop the draw and make things OK...

I finally got up the nerve to trade in my 2520 on a 3320. Delivery scheduled for tomorrow!! I've wanted to trade for a while after realizing that I shoulda went bigger to begin with. The 2520 is a great machine, and was bigger than the 2320 that I originally wanted. The FEL capacity is almost...

I was pleasantly surprised to see that I used 16.5 gallons in 28.8 hours of use. Mostly finish mowing with some tilling and loader work. That is .57 gallons per hour. At first I thought the hour meter must be off. So I checked it against my watch. Nope. It's right on the money. Is 1/2...

:confused: Hi, Ok, Tractors are new to me but this was even a surprise. I must have driven over a rock with the front wheel on my 3320. There is a cup (looks like what would go over wheel bearings to protect them however this is somewhat horizontal, much where a tie rod would be on a car) of...

Hi, Ok, Tractors are new to me but this was even a surprise. I must have driven over a rock with the front wheel on my 3320. There is a cup (looks like what would go overe wheel bearings to protect them however this is aomewhat horizontal) of some kind under the end of the axle right behind...

The manual says don't worry about the engine oil and filter for 200 hrs. and a heart stopping 400 hrs. for the hydro fluid and filter. But I'm old fashioned. I like the 50 hr. service, dang it. It's comforting, like mom's macaroni and cheese. So I blow my $220.00 on 5 quarts of 15 W40, 8...

I decided to change the engine oil and filter, and the hydro fluid and filter at 50 hours. It's not really due until 200 and 400 hours respectively. But I figured it would be cheap insurance. Turns out this insurance really is not that cheap. The attached bill shows a total parts cost of...

I spent 5 hours mowing with it yesterday and it is a very comfortable tractor. Work photos will following as the different projects get going. Thanks to everyone for their input during my tractor search.

While I was brush cutting back in the clear cut this weekend which is about 18 months of new growth of 6 to 12 feet high of poplar trees and like a very very green jungle and hard to see anything on the ground, I guess I did not have the bucket down far enough to catch this one and ended up on...

I was quoted $21500 for a 3320 with 72inch mid mount mower and fel.Not sure of size of fel but the salesman said it was the "bigger one".wanted to get some info if thats good or not. thanks!

I have a 3320 and the hood, fenders, etc. are all made of plastic. I want to shine it up. The manual only says to use a non-abrasive polish. Does anyone have a particular brand that works well for them? I am afraid of marring the surface with small scratches if I do not use the proper product.

Hi guys My question is, what does it take to use a MMM (72") on a 3320 that is setup for a loader and backhoe?? I would of course remove the backhoe, but do you have to do anything else?? If I needed to use the backhoe in light duty digging could I leave the MMM mounted?? Any idea on cost...

I ordered a 3320 on 8/6/07 and was told it would take three weeks to come in. 12 days later, Saturday 8/18/07, I got a call at 8:30 am saying everything was in except the Frontier front angle blade. Would it be OK if they delivered later that morning? Let me think about it and call you back...

After selling my rock solid 325 hr. Kubota B7610 (24 HP) and searching for a 30+ HP replacement, I have decided that the 3320 is my favorite, hands down. I absolutely love this tractor. I even worked out a decent deal with 2 local dealers. I just have one hesitation- from reading this board...

I am ready to move up from my 2520. I have been building 3320's on the Deere website for a week now. I have a few questions about some of the options. I know I want R4's, but which ones? I like the 6 plies, but wonder if the bigger ones will ride better. Would like to stay around 60" wide so my...

hi guys, another newbe here long time lurker but this is my first post. I am planning on purchasins a 3020 series tractor within the next few weeks. I have been leaning towards a 3320 hydro with larger r-4 tires, a 4 in 1 bucket ( should i get the 60 inch or the 72?) I will also get a backhoe...

Is it me or do the seats on the 3320 sit low? I grew up working on a farm and drove plenty of big tractors. I Now just have a small property 5 ac. I currently own a 2210 and would like to up grade to a 3320, I went to sit on one, I cranked up the spring tension on the seat so that it had good...

Hi. My grandfather purchased a new JD 3320 Cab tractor about a year ago. The unit now routinely blows excessive black smoke and engine-knocks upon start-up, and sometimes during normal operation. He uses it mainly for light mowing (lawn, not brush) and occational loader work at his truck...

What would be the best 5ft rotary cutter for the JD 3320? And would the FEL need to on or off for the best ride while cutting with it? I will be cutting 9 acres of pasture with a lot of Reed Canary Grass on it. The soil is mostly clay. Thanks.

I am thinking about fencing off about 9 acres of my land. I am thinking about doing a 6ft tall fence. The clay soil gets really wet in some spots during the fall/winter. Therefore, I would need to put concrete around the fence posts. What size post hole digger would I need? And could the JD...

Looking for fact based opinions/experience on the merits of both units. The 3203 loks like a nice unit, what you give up, doesn't look like it is important to me. But the powertrain specs look very similar to a 3120, which I've read here is underpowered. I'll be using the unit for rotary...

On my 3320 with MX-5 (total of about 45 hours, 35 with the MX-5). I have noticed in the last week that the 3PH will not stay where I set it. As of now it acts like this: if I raise it all the way up, it will slowly start to drop--about an inch in 5-10 seconds. If I raise it to the mid-way point...

hey guys I just looked at an H & H 20' tilt bed trailer 10,000lb. has anyone had experience loading with a trailer like this? or would I be better off with a trailer with ramps? only will get used aprx. 6 or 8 time a year

Hello all, I am getting ready to buy my first tractor. My question is a simple one, is all the PM such as oil changes and such done just by the amount of hours and use? In other words, If I garage it for a year is there any PM I would need to do. As with a car, it is recomended not to leave...

Hello all!!, I am learing a whole bunch on this site being new and all to this stuff. I am looking to get a JD tractor, started as a 3120 but that seems to be not the way to go from what I read here. I have a few acre in need of a bunch of help at my house and lots of bones. I will have the...

Hello folks, recently my better half and I have been doing some soul searching and future planning and it has become apparent to us that the area we were born and raised in is not the place to raise a family and own a large property in. I've been looking closely at Tennessee and have found some...

Well the dealer dropped of my 3720 cab yesterday. They haven't got the turf tires yet so he dropped it off with unloaded R4's. The only thing I am still waiting on is the snowblower. Hopefully I won't need that for a while. I'm also getting either 4" or 6" wheel extensions from Unverferth...

I receive my new 3320 this morning and was wondering about something the dealer told me. I was talking to him about the iMatch option and he told me that only JD implements will work with the iMatch system. Is this true? I'm thinking it would make things a little easier and it would allow my...

I'll try to keep this brief. I have a tendancy to ramble, especially when I'm upset. I was on a while back asking about apples and oranges (JD vs Kubota). In the end, I ended up buying a JD 3320 cab tractor with 300 CX loader and a 6' rear mowing deck. I want to note that my dealer has a...

Well, the dealer picked up my 3320 today (Canopy, Cruise, extra front rear lights, Power beyond, etc.). They hopefully will deliver my 3720 cab next weekend so I can mow, etc. I also have a ton of storm cleanup (downed trees, etc. to cleanup. Now I can't wait. My 3720 is actually all ready...

I'd like to play CD's and have hearing protection at the same time. What's the best way to do it out there. I'm sure I'm not breaking any new ground on this one but I'm not sure if a marine radio can be installed on a 3320. I'd prefer wireless headphones too so I can jump on and off without a...

These three tractors are within 3hp of my target of 30HP. They are so similar I can't determine the differences. They are all the same size, same 3 cy YM engine, etc. Can someone enlighten me? Why would JD need 3 so close to each other? Kind of like the Chevy Tahoe vs GM Yukon...same truck...

My JD 3320 w/JD 300X FEL & Frontier RT1360 65" Tiller & Frontier GM1072R 72" RFM is supposed to be here Saturday. And man this week is dragging.... It will be difficult, but I will have to force myself to sit down and read the manuals before I do anything... :rolleyes: But alas!!! The JD...

Hello Everyone, Here is my New Tractor and the project I will be working on.

I took delivery of the 448 backhoe with 18" HD bucket last night and had a few hours to play around with it. I'm a complete newbie to backhoes so bear that in mind when reading... this info probably isn't useful to any of you experts out there. Pros: - plenty of power even at low engine...

:) HEllo Everyone. I finally got to use my new 3320 yesterday. Boy it sure is a nice powerfull machine. The piles I was digging into were still frozen inside. It handled a bucket load of sand or black dirt with no problem. I was looking over the service manual before hand and it showed a grease...

I got my JD 3320 last spring. From the first day I got it the fuel gage was acting funny and then just a few weeks later it stopped working altogether. Last summer my dealer said there is a known corrosion issue with the in-tank fuel gage module and that he could replace it, but it would just...

I have a 2305 (1.5 years old) - BH6000, 200CX loader, 62"MMM, 47" Snowblower and a 3320 (6 months old 300CX loader, 72"MMM), Canopy, PBY,etc. It was a tough decision but I decided to trade in the 3320 for a 3720 Cab. (As opposed to trading in the 2305). Now I can't wait to get the 3720 (R3's...

Hello Everyone. You all have a great website here and excellant discussions. I have been reading them for quite a while. After shopping for 2 years I bit the bullet and bought a new JD 3320 with the power/reverser and 300cx loader with heavy duty bucket and the big R-4's. I also ordered a...

Will the 3320 handle a 6ft bush hog and box blade? Also is the 61" bucket that comes with the 300cx loader heavy duty and should I get the tooth bar? Thanks

The dealer broought out my 3320 today, didn't have much time to mess with it though, I am working midnights this week. The tractor didn't show up till around 3:00 and I leave for work at 5:30. What I did get to use it seem awesome.

I bought a new 3320 two weeks ago, the tractor was setting on the lot and the salesman said they had the loader in stock at there other dealership which is 40 miles away. The only thing we were waiting on was the 60 MMM and lift components. I talked to him Friday and he said the lift parts are...

Well after a bunch of pricing with three different dealers, I actually found out that the prices people are getting on this forum are better than I can do unless I find a dealer who doesn't want to make any money. I ended up not even going with the cheapest place, because I felt the...

Hi everyone, hoping I can get some help understanding why the price I'm getting quoted is so much higher than some I've seen here on TBN. JD 3320 CUT - eHydro - loaded R4s (beet juice) - dual mid and single rear SCVs - iMatch - air seat - forward lighting kit - warning light brush guards - rear...

Hey fellas, I see a lot of people quoting some pretty darn low prices on 3x20 tractors. Some of them are too low to believe... almost 25% off MSRP! From what I gather, if you get 15% off, you're doing good. So here's a breakdown of what I'm pricing out, with MSRP (same as JD web site), and...

Is there an owner out there who can give me some details of what they paid for this machine? Likes, dislikes. I'm getting a little older and some heat in the winter would be nice........Thanks all.

I am looking at a 3320 with a 300CX loader. I have a couple of questions since I get conflicting answers from different JD dealers. 1) The air seat option, is in available on the open platform model? One dealer said it is only for the cab version. 2) I want the skid steer QA capability for...

I'm in the process of evaluating purchase of either a JD 3320 or a Kubota L3240 with FEL. The L3240 has the edge in HP (34 vs. 32.5) and is ~200 lb heavier. However the 3320 has more gears (12f/12r vs. 12f/8r), larger fuel capy, wet vs. dry clutch, and more hyd pump capy. Use will be...

3320 hydro, 300cx loader, 447 backhoe, R-4s loaded with juice, set up and delivered... 25,900 Does that sound good for the Pacific northwest area? Thanks.

Would a 447 be the "right" backhoe for a 3320, or could someone use a 448 with no adverse effects? Thanks.

I got to talking with the dealer and realized that I could get a 3320 with hydro for 1500 more than the 3120. So, the total package would be $26,800 for a 3320, 300CX, 447 bh, loaded R4s, grill gaurd, delivered. Does that sound decent, or would I be better off with the 3120 at $25,300 (he went...

I took delivery of a new 3320 and implements this week. JD 3320 300cx loader 448 backhoe JD 665 tiller Frontier RB1084 Frontier RC1072 Imatch Enjoy the pics http://i161.photobucket.com/albums/t...20leftside.jpg http://i161.photobucket.com/albums/t...RC10723320.jpg...