john deere 3320

Could someone tell me where the right master cylinder is located or how toget to it. The pedal pushes down but does nothing, the left side will stop the left tire. So I am guessing it needs a new master cylinder on the right side. Any help is appreciated.

I need forks and was wondering if a 3320 would handle 1500lbs? If not, what tractor should I look for? Thanks, (I am a newbe)

I am getting ready to change my hydraulic oil and filter and am wondering if there is a "suction screen" that needs to be cleaned on my model. I asked a mechanic at the local JD shop, and he said he didn't think my model had the "suction screen" that other models have. I also cannot find any...

I;ve got a 3320 I'm thinking about getting a belly mower for. THere are several used ones around with very little time on them. Got a few questions for anyone using a belly mower on the 3320. -Besides the mid-PTO kit, is there anything else I need? -Do they make a 72" drive over model that...

Hi everyone, I am new to the site and currently have my eyes set on a 3320 for our 3 acre property/home that we purchased 2 months ago. We have approx 1 acre of grass but that will be expanding including the making of a garden and clearing some trees. I also expect a lot of loader work in the...

How do you replace transmission filter element in transmission.

I'm shopping for a used JD 3320 eHydro with ≈ 375 hrs, still under warranty, already posted about my problems: http://www.tractorbynet.com/forums/buying-pricing-comparisons/275592-advice-replacement-tractor-10-acres.html Property: 15 acres in California's hilly wine country (no snow), about 6...

Hey guys, I know this question has been asked before, but I am hoping for some advise. I am currently an open station red tractor owner looking to switch to a Green Cab Model. My main uses for the tractor are snow removal, road maintenance, Brush hog mowing (6 acres a couple times a year) and...

We have a few horses and are thinking of moving to using round hay bales. I know my JD 3320 with the 300CX FEL can lift them using a 3PH round bale spear, but I'm wondering if we can use a FEL spear. I'd prefer the kind that attach where the bucket is - rather than the kind that clamp on the...

I have a Deere 3320 with a 300CX loader. Everything was fine until one day last week when the left loader arm disconnected itself at the quick disconnect mount on the tractor. I saw what looked like excessive wearing on the mount itself on one side. Ever since then if I pick up a heavy load...

At present I have a JD4100 with blower,back blade, mower, and heated cab, also a JD790 with loader, back hoe, blower and backblade. The 4100 sits all summer. The 790 is used all year round.Thinking about selling both and looking at buying a JD3320 with cab, blower, loader and back blade. Any...

I need to take out the black plastic operator station cover so I can repair my loader lever linkage. How does the orange cover on the range selector lever come off? Is it snapped on? I started to pry a little with a screwdriver and don't want to break it. Also, how to remove the rate of drop...

Blowing snow this evening and the SCV lever suddenly wouldn't move the SB59 blower chute to the right.(loader dump) The lever moved really easy like the linkage let loose. It would move the chute left (loader bucket curl) I believe something let loose in the linkage. Do I need to remove the...

My second time hauling my JD 3320 by trailer occured this morning. Now I'm the type that has visions of my tractor falling off of the trailer while on an overpass and landing on top of a filled school bus being driven by a nun. Because it's my deep desire never to be featured on National News I...

As you all probably know, I have been forced into selling most of my equipment due to my wife leaving me. As stated before I will be back in the tractor buying mode once this is over. I recently sold my 4720 Cab tractor and loader. The backhoe attachment did not sell and I have a friend...

im looking at a used 3320, owner says dash just went blank ,recently! is there a way to check current hours? and can this dash be fixed to show correct hours? what makes them blank out? thanks

My JD 3320 4x4, ~550hrs, developed a slight leak last spring after I used switched it to 4-wheel drive and used it for about 3-4 hours in a swampy area I was clearing out. It's only the front left tire and nothing 'major', but it looks ugly as sin and really bugs me. The strange thing about this...

Anyone turbocharge a 3320 engine? Does Yanmar make a turbo 3TNV88?

first time tractor buyer, looking to make sure that the asking price is reasonable? they are asking 25900 for a 2009 jd 3320 with turf tires cx300 loader. it comes with a 485 bachoe with 175 hours on the machine over all. i need some help have till mid to late january to make a decision and the...

Folks, I have a JD 3320 and a 2004 Chevy Silverado pickup truck with a 6 cylinder engine. I want to size a trailer to haul the tractor to a place I do volunteer work at and to haul it to the shop for repairs. Both places are less than 50 miles. I know nothing about trailers. How do I start...

hey everyone, I am new to this form because i plan on buying a 3320 john deere and need to gian more knowledge ive been doing my research for a few months now . I'm looking for opinions and some guideince from people who own and know about these machines. There is a 2009 john deere 3320 with...

Bought a new cabbed 3320 at end of summer and I can't seem to get the heat on in the cab. This is the first time trying it in cold weather. Both the heat and cold knobs are turned as far as they go clockwise and I have the AC/deicing button pushed on..It is still blowing cold air. How long...

hello iam looking for an rockshaft rate of drop control knob for an 2007 jd 3320 new or used, also were to get an upright muffler for my 3320, if anybody has used or let me know to buy the parts thanks

I am thinking about getting the JD canopy for my 3320. I have to fold the ROPS to fit the tractor through my garage door. My question is, can the ROPS still be folded when the canopy is installed, so I can get the tractor into the garage?

During this next winter I need to store / work on something in my heated shed. Unfortunately it is about 6' longer than the shed interior. Rather than seeking a variance and / or building permit, I decided to construct something temporary. The structure was built in two "U shaped" parts 8'...

Good Morning guys, I have a quick question. Nights in MN are dipping into the mid/low 20's and it got me thinking the 3320 still has 3/4 of a tank of summer diesel in it and with most summer projects done now i don't see my self burning that much fuel before it starts...

just like the title says, looking for turf tires and wheels for a 3x20 series or possibly consider some off of a 4x20. I'd be willing to pay shipping and handling, i'm in North dakota. Thanks in advance

Folks: Need your advise! I have a JD3020 with 300hours. I applied the parking brake and when released it seems that the parking brake is still not fully released. Also noted that the travel distance when you pull the brake to apply it has decreased. The tractor will drive but has resistance...

I thought it would be easy to find an answer but a search didn't return anything. My 2005 3320 has had a slow leak at the hydraulic pump filter cover since I did my first fluid change. I nursed it along until I couldn't stand it any more and I got farther into my change interval. Finally did...

New used 3320, with new operator. Installed DR logsplitter and connected to rear fittings using male npt fittings from tractor supply. JD dealer closed over weekend. JD 3320 manual says to lock 3 rd SCV forward to allow free flow to rear connections. fluids are full, but no action on...

Does anybody have a hydraulic top link on a JD 3320? If so, can you advise where you got it and how you like it? Any tips? I just started looking at them. Thanks!!

I need to replace my front wiper on the JD 3320 Cab. I know it is a Michelin, but tried a RainX and it didn't fit the contour of the windshield. Has anyone found a correct replacement for this blade?

Greetings, My brother in law bought this new JD 3320 compact tractor in August of 2006 to work on his new home in 2008, sadly he suffered a massive heart attack at 49, and died. My sister has decided to sell this tractor and asked me to find out what a fair price is. JD 3320 Details: S/N...

Anyone have experience with the loader parking stand not dropping all the way with the loader masts still attached? Tractor is a 3320. Hose didn't seat and came out. Can't get it back in now. Is it possible to manually drop the stand? Thinking switching to another coupler won't work...

So I am getting real close on pulling the trigger on a used 3520 with 320 hours or a 3320 with 223 hours.PRice is pretty similar (3520 is $1k more) Both are open, no a big fan of cabs. Has anyone else compared these two. IS the power difference between the two that noticeable? Most of what i...

I live in Central ME and if we have another open winter like last, I would like to try to get some wood out of my swamp. My JD 3320 has the R4_15X19.5 rear tires so can I hear suggestions on what type of chains would work best for me and where to buy them. Thanks :)

So I am really close to pulling the trigger on a 3320 with low number of hours on it. I thinking about getting a belly deck for it. I have some questions about it. First, is all I need the mid PTO kit to add it? Does the PTo kit get you the quick disconnect? Can I add any deck that will work...

Just the other day my 3320 bucket stopped lifting beyond 3/4 way up and will not push down to raise front end of tractor. Fluid level for hydraulics is is good and all hose and lines seem fine. I also noticed that the engine labors when it reaches the end of its lift (3/4 way up). Anyone with...

Hey Guys i'm going to install a radio in my 3320 this weekend. The cab is all pre wired just need to pop in the deck its self. My question is i removed the cover and it's a square plug if i remember right the decks you get at best buy or wal-mart are not a square plug on the back of them. is...

Folks, I purchased a used JD3320 (2005 vintage) 2 years ago it had ~ 500 hrs on it. I change the oil ever 50 hrs or twice a year which ever comes first. I have no idea if the engine has sludge in it. It seems to work great. What symptoms would I experience if there was a sludge build up ...

:confused2: With the help of my last post ( lot great advise ), I have decided between the JD 3320 and 4105. I thought I was set on a 4105 ( more hp why not) but spoke with another mechanic who stated the 3320 has a much heavier frame then the 4105. Because of this the 3320 can take the 485...

the 3pt. hitch hunts up and down about 1/8 of an inch with a load on it

I'm considering the purchase of a 2005 Deere 3320 that appears to be in great shape with about 950 hours on it. It has a 300CX loader on it. Does anyone know of any significant updates that Deere made on newer model year 3320 tractors to fix issues the are on the 2005 model? Are there any...

I live on 10 acres and plan to use the tractor for landscaping, road maintenance, snow clearing, digging, spreading, brush-hogging, possibly finish-mowing (more on that later), food plots and just general odd-jobs around the place. I've also got a hunting farm (154 acres) a couple hours away...

I was considering swapping my tires to get a wider stance but after looking at it with the 72" MMM, I think the tires will hit the wheels on the deck. Has anyone tried this yet?

Knowing that Bradco does not advise the use of a 485 backhoe attachment with a JD3320, could the 3320 support the weight and stress from a 485 mounted on a 3 point?

I'm getting close to pulling the trigger on this tractor (upgrading from a 3032E), but have a couple concerns I'm hoping you can help with. First, it requires 2600 RPMs to drive the PTO while the 3032E needs 2500 to do the same job. Does this imply the 3320 is underpowered? Did about four hours...

Hey guys, I've asked this question before but it's been a long time and now i'm finally ready to purchase looking have the new one no later than Aug. I currently have a 2008 John Deere 2520 200CX FEL 62D MMM 250 hours. What can i expect on trade for this machine can someone give me...

New member here, have been reading this great site for a while. This question may have been answered in another thread, but I wasn't able to find it. I have an opportunity to buy a used John Deere 3320 with turf tires that has it's rear tires filled. I'm interested in the 3320 tractor for...

I have a JD2520 with a hydrostatic transmission, it offers two speeds-Hi-Lo with forward and reverse dependent upon which pedal is pushed. How does the 3320 or the 3520 work? Are these 2wd and go to 4wd when manually switched or does the tractor decide? Thank you for your help. Chuck Vierthaler

I need a box blade for my new 3320, which brand should I get, and should I get a 5' or 6'. I have ag tires.

Are the springs on the loader supposed to bang and pow when I work the loader like its supposed to be worked (like a dog)? After I back drag then dig a load, sometimes it lets out a godawful bang, like someone is resetting its dislocated shoulder. It's a brand new machine with 12 hours on it.

Well, I need some advice... Hopefully you guys can help. I have 20 flat acres where construction of my house will be begin soon. I'll be mowing about 5 acres, maintaining a 200 ft driveway, putting in trees and fence posts and doing some landscaping. A buddy will also be digging a 1 acre...

I just took delivery of a new 3320 with fel and rear mower. I traded in my 670 that was much smaller and was a MMM. Now I need a new trailer. The question is what size would you reccomend and is there anything I should be aware of or look for?

When I tilt the bucket back, should it maintain the back position or do they tend to move toward the dump position with a load? Thanks

Stopped and looked at a 3320 with a cab and never asked the dealer what the total height is from the ground to the top of the cab. Was not mentioned in the brochure either. Does anyone know what the height is?

hello, i have 2007 3320 ,iam looking for a backhoe .can anybody tell what will fit 48, 447 i have been looking but dont want to buy something thats to big or wont fit any help.. thanks

I have a 3320 with 135 hours on it, sometimes it is hard steering. I even put down pressure with loader to get tires off ground and no different, any thoughts?

Has anyone on here have experience moldboard plowing with their John Deere 3320 with Hydro. I realize that the type of ground will make a difference. What size do you use..one or two bottom? 12" 0r 16". Does the tractor seem to have enough power? How is the traction?

I am deciding between a used JD3520 with cab, 300cx loader, and loaded tires with 182 hours or a new 3320 without cab and a 300x loader. I love the cab but the warranty is 3 months or 30 hours and the condition is used looking with a dented in front grill, scratch on the hood and rusted loader...

I have a John Deere 3320 cab tractor with the standard seat and am considering upgrading to a air ride seat. Would you recommend spending the extra cash for the air ride. If I purchase the air ride seat, about how much is it from John Deere and also is there a "knock off" from another company...

I'm thinking of upgrading the R4's on my 3320. I currently have the 19.5(smaller) R4s. Thinking of going to the larger ones. Is there any advantage to the different tread design of the larger R4s over the smaller ones? I know the 43x16-20's are 2 1/2 inches taller than the 19.5's. That would...

Hi All, Trying to change/clean the inline hydraulic filter on my 3320. (Part of doing full hydraulic change). This is my first time doing on this machine as it is new to me....(but not sure when the last time this was cleaned....2000+ hours). Manual says remove filter from Lines, then...

MFWD doesnt seem to be engaging on my 3320. any ideas?

I'm trading in my good ole 1974 JD 2030 for a compact tractor. I've looked at other makes, but decided to stick with JD for a host of reasons - dealer relationship among them. I'm looking at a 3038E vs 3320. I like the 3320 for its weight, although it has less HP. And it's substantially...

Any issues with turbos on the 3520? I always want more power whether I use it or not. I will have to order the 3520 and the 3320 is in stock. I want the 300cx loader , 2 remotes, vertical stack, top & tilt. These are 2012 I could save $1000 on a 3320 built June of 2010 new old stock, but it is...

I just lowered the price on my father in laws 2008 John Deere 3320. Tractor only has 27.7 hours on it. It is listed in the Classified section under the private adds. Tractor was on page #4 the last time I looked. Pictures and description are on ad.

Hey Guys and Gals, I am new to this site but have been looking on here for years and have always appreciated the help and responses fellow owners give. I have a question for any 3X20 series owners. I am about to order my new 3320 from a local JD dealer and want some advice. I am planning on...

I just lowered the price on my father-in law's John Deere 3320. It is a 2008 with 27.7 hrs. It is listed in the "Classified" section under private ads. It would be a great deal for someone. Pictures are attached to the ad.

I'm looking @ both of these tractors and would like to know if I'm getting good prices & advantages of the 3320 over the l3800 (both new). Both HST trans. JD 3320 w/300X FEL: $21495 Kubota L3800 w/LA524 FEL: $18945

the 06 and 14 errors seem to come and go the 08 stay on. The rear PTO will not run and the hydro will not drive forward but will drive backward (sometimes) the Loader works normally as does the three point lift. I checked the wiring to the MFWD LVA 17409 speed sensor and it was intact. No...

Before I go and do something I may later regret, has anyone found an easy to tap into 12 volt DC source near the rear of a JD 3320 ? I'm trying to avoid cutting into a wiring harness. I purchased a 12 volt sprayer from Northern tool which is meant for an ATV. I have a carry all and will build...

I just listed my father-in-laws 2008 John Deere 3320 in the Classified section under Private Party Ads. It's a great deal for someone looking for a John Deere 3320.

My father-in-law passed away before X-mas and had a 2008 John Deere 3320. His wife has asked me if I could help her sell it. I would like to get an idea of what it may be worth. Like I said it is a 2008 3320, it has a 300CX loader, RB2072 6 ft. wide blade, and cab. Tractor has 27.7 hours on...

When I raise the hood on my 05 3320, it twists because one of the support braces broke free from the underside of the hood. What type of plastic is it made from? Can it be glued back together with epoxy? Any suggestions? Thanks, Brian

Because of dry fall's slow growing grass, business trips and other events my JD 3320 diesel hadn't been started since ... hmmm maybe early November? ... more likely October or September? Its stored in a barn, but still, the battery is older and I dreaded trying to start it up. Yesterday...

I'm looking to sign papers on a 2007 JD 3320 with 750 hours on it. It has a canopy with the work lights, rear remotes, and brand new 300cx loader. The original owner was a older farmer who used this tractor for loading sawdust and feed on a small 40 head dairy farm. He traded it in for a used...

I see 2 plugs on the Left side. Put it in the front or back one? I bought a 1" NPT heater for $27.00 Looks just like the Deere and Zerostart models.

I have a Woods 750 Backhoe which I used for years (decades) on my previous tractor....it uses a 3 point hitch system (Woods calls it the Saf-T-Lock system)...apparently ignorance was bliss in that I was never aware of the dangers inherent in a 3 pt mount system. Now that I have my 3320 with cab...

Hello All! After two years of trying to get the heavy lifting and moving done with my old Ford 641, I have realized that I really need a much more reliable machine (99% vs. 50%). Also, while I have managed to get alot done with a chain, drawbar, and box-blade, I have a list a mile long of...

I have a 08 3320, when the steering wheel is turned all the way and I am backing up the front tire rubs on the power steering line where it connects to the rack. Any idea on how to adjust the "stop" so this doesn't happen anymore?

Got a FEL question for all of you. I was reading a post from another 3320 owner and he had several pictures of a pallet full of cinder blocks that he was moving around. I know my 3320 cannot lift that so I was wondering if there was some kind of test I could perform that would settle my "unfound...

Are there any online videos showing specific instructions on removing and installing the 448 backhoe on a 3320 compact tractor?. Thank you. Bob

Hi all- I'm new here so please be patient with me. I have a 2006 John Deere 3320 (300 hours). The quick connect bracket for the front bucket has been bent downward and now it appears the fitting/line two out from the tractor frame is leaking. It looks as if it is the hydraulic line and not the...

The question of a MID PTO and the Power Reverser transmission on these tractors comes up periodically since Deere doesn't let you configure one that way on Build Your Own. It is definitely an option that you or the dealer can install. The kit from Deere is a little under $600 and is complete...

I'm coming up on 350hr on my 3320 and it has been relatively problem free. But this one seems non typical. I actually noticed it a few weeks back but dismissed it as nothing. While climbing my steep drive in A range with cruise on and 20k on the tac, it seems to surge slightly almost as if the...

A neighbor is looking to buy a tractor about my size, I have a 3720. He wants a loader, backhoe and 6 foot finish mower. He has a quote from Kubota on the L3800 at about $26,000. I am confused on what backhoe I should configure for the 3320. Even taking 15% off (which is what I got when I...

Any performance problems 3320? They tell me it will be as good as my 4300?? I have gang mowers and the new weighs 500 pounds less with narrow tires! Any help there??

Hiya, As per the no pic, no tractor rule, here's the latest addition to our selection of tractors It's slightly used, less than 25 hours. I added the loader, 3rd remote, loaded tires and power beyond. Saved about 10K off of new and it still has almost 2 years of warranty coverage left. Know...

A lot of tree damage here in the Northeast. So the what-if ideas you guys would have with this might be funny and interesting. The problem will be the same as 3 years ago when a 21,000lb bucket truck needed to get back up to the driveway level. In the last 2 truck lengths of going up, the...

Just test drove a 3320/e-hydo/300x FEL...dealer priced out at $23,200 w/48 months 0% interest. Your thoughts? What have others paid? BTW...curious the dealer was pushing the 300x vs the 300cx...I had thought the cx would be a good upgrade? Thanks in advance...TMR

I'm looking for the neutral start switch location on a JD 3320 tractor. Can anybody help?

Hi All, New to me 2007 JD3320. Had for a couple of months. Started up tractor the other day and heard a load screetching from under the hood. Opened it up and didn't see anything particularly wrong....but smelled burnt rubber. I figured it was a belt. I noticed that the "idler"...

I want to move up from my DR field and brush to a tractor mount, can my 3302 handle thick seeding with a 6' along with small saplings?

The momentary contact operation of my cruise control switch is no longer operational. 5 months ago, it was not making contact so I disassembled the switch and filed off the end of the plastic rocker so it would make better contact on the switch parts. That has now failed again, does anyone...

Been running my 3320. Over the last couple of days I have noticed when trying to back up I get error code 14. I shut off the machine start it back up and it clears up but it has gotten progressively worse. Having to shut it off and start it several times to get it to move backwards. Finally it...

See link for pics of new 3320 and other equipment I have been blessed with. www.photobucket.com/deere3320

This will be a FYI to others so you guys can benefit from my findings. About 3yrs back I added a 448 hoe to my 3320. The dealer did all the install and added the Power Beyond. About a month later I was having rockshaft issues. While loaded with an implement it would constantly slowly lower and...

Hey guys, I am thinking of trading my x720 GT for a 3320 with 72d auto connect deck. Anyone done a similar trade? How well does the auto deck really hook up and disconnect? Anyone want to buy a 1 year old, low hour (80) x720 in central IL for $7500? jphippard@yahoo.com 618.292.0025 John

Just had a 375 JD Backhoe put on my 3320 cab tractor. I'm a big guy 325 lbs and am very cramped on the hoe. We have adjusted the seat and the controls still hit me when pulled back. While I can operate it it's uncomfortable. I voiced this concern to the dealer before having it installed but...

Hiya, Planning on taking delivery of a 3320 cab in the next week or two. Wondering if the through the hood exhaust is worth it. I do want to keep the black soot off the loader and snow blower but I don't want to have it right in my line of sight when working with the loader. Does the cab hvac...

thinking of jumping from a 2320 to a 3320 cab.....Im getting tired of mowing in 100 degree heat and the dust and grass blowing in my face all the time...... can you guys tell me how well the A/C works in these cabs..?:)

I have a brand spanking new 2011 3320 with ehydro (NO CAB). It has 5 hours on it. I got the 72 inch drive on iron deck. Im wondering if anyone is having the same issue I am. When driving in B range, its terribly jerky when mowing, it lunges and bucks like a bronco. I set the RPM right to...

Hi, I came across a 3320 for sale, it is a 2010 with 56 hours, 300CX loader and 375 backhoe. In excellent condition and garaged. I can buy this for $21,000. I'm thinking this is too good a deal to pass up, even though I have been happy with my 4110. Just looking for a little advice from my...

Hi Guys, New to me (about 2 months) 3320. 2007 cab model with 2200 hours. Quite a few hours, but got it from a friend at the "friend price" and he takes care of his equipment Machine has been solid since I got it and I really like it. However I have been cutting grass on the weekend...

I understand these are completly different tractors and I have researched both extensively. I am in the market to upgrade from my 2305. My use would be a mix of loader functions (mainly snow removal), some pto use (rotary mower and rototilling) and limited one bottom plowing (an acre or less)...

Hello, know it has been covered about a year ago. But, I'm assuming my front seal went out on the axle.. The last few days there has been oil running down the rim and tire. I'm relatively mechanical inclined. My dealer said it requires a service tech to fix it. Of course it is out of...

Hello, my 3320 has a sinking 3pt when I have an attachment on. It settles about every 2-3 minutes, then lifts back up. It is very annoying. My dealer said sometimes this happens. This is a bunch of bologne, because it started about 300 hrs. Does anyone else have this problem. Also, by...

Hello, know it has been covered about a year ago. But, I'm assuming my front seal went out on the axle.. The last few days there has been oil running down the rim and tire. I'm relatively mechanical inclined. My dealer said it requires a service tech to fix it. Of course it is out of...

While changing the front axle oil I noticed the left hand hose which ends up on the right hand steering cylinder fitting had rubbed/polished the left hand hose ferrule and fitting. Those 2 hoses have a rough coating on them, but the left hose was smooth at the contact point. The tractor has...

I have a 3320. I want to change the coolant. Instructions say to turn the engine block pet cock? Thinking that is wrong - dont see one. Is there an engine block drain plug I need to remove to drain the coolant from the engine? If so what size socket or size allan is it and does anyone have a...

Another satisfied customer of Chris' Pallet Fork. Really well made and powder coat looks great.

Has anyone priced a 3320 in the NorthEast recently? I checked a few dealers and they're about 9% off off the price I work up on the JD configurator. $eems a little high to me. Ronster

Hi everyone, I am wanting to put on rear svc hookups on my John Deere 3320 so I called up the dealer and the guys said that I could do it myself. It would be way cheaper all I would have to do is by the parts. Does anyone know how hard this is or what it all entails? Thanks!

I found a dealer in Texas Hurst Farm Supply with the best deals on JD tractors I've seen. They are close to 30% off the MSRP. But, Texas is a long way from SW MI. Just curious if there are any JD dealers near SW MI that will deal. Everyplace I've looked so far pretty much just quotes the...

I have now spent some time with my 3320....and it became quite evident yesterday how much more pulling power and tracton I have with the 3320 when pulling my disc. I was a bit concerned due to R4 tires. (I have my rears loaded) I was discing some new ground, and this tractors weight pulled my...

I own a 3320 . There is a switch which cycles through different information on the LCD display. Anyone know what SHORT-D and LONG-D means ?

Well I've taken the plunge and purchased approximately 14 acres of mostly wooded land in Fauquier County, VA. Less than 1/2 acre is cleared and as such I've purchased an LD120 riding lawn mower to cut the grass. I've actually use a 21" push mower to cut it in a few hours but figured a riding...

The errors had been off/on for 4-5 months, so I dug into it a little deeper and found error 61/65 to be broken wires going to right blinker and brake light. Dealer had installed the 447 backhoe in Jan 07, the installer had pinched the green (right blinker) and black (ground) between right side...

this may have already been brung up before, but has anyone had this code come up before? It happens when I hit the cruise control, and after a while with it on, the hyd. (and hydrostatic)go into a very slow mode till the engine is shut off and restarted. As long as I don't hit the cruise it...

New to the forum - sorry if this is a repeat - I have been shopping for a tractor and have ruled out the Sub compacts like the B3200 Kobuta and the JD 2720 - So I am raising the bar and have two dealers quoting and L3400 versus JD3320 - I think both tractors are built well enough for my uses...

Hi everyone great information here, it's been very helpful. Looking for any feedback you might be kind enough to offer. I'm sold on Deere because the dealer is close and has been pretty helpful so far, I don't like the pedals on the Bota's, and my wife loves JD because her Grandpa did. I'm also...

Just got my X500 on Wednesday. Need to take next step and trying to decide between 3320 or 2520. Have 10 acres of mostly woods I need to clear and maintain. Thanks.

I've had my JD 3320 O/S for just over three years and for the most part it has done everything asked. During the winter my son & I were doing a little project and needed to borrow a couple of the neighbors big Cab tractors and then shortly after my son sold his JD 790 and purchased a Kioti DK65...

Hi, I've been looking around here for a while, but can't find an answer to this question. I'm concidering a Mahindra 3316HST and a used John Deere 3320. Both hydro models, both with loaders and 72" MMM. I have 6 acres with a new house. I need to move a bunch of dirt this spring and prepare...

Just bought my first tractor. 3320 with powereverser. Only 14 hours so far can't wait for more seat time. I read hundreds of JD posts deciding which model to buy. Thank you everyone. will try to post pics soon.:)

I have noticed that recently, my 300X loader w/either pallet forks or buck, will "droop", in other words, either will roatate to a dump configuration. It's a slow creep, even when engine is running, and lift control is centered. The frame lift is ok, just the front end. Was disking last week...

Wondering if I paid to much. In Sept. of last year (2010) I purchased the following: 2010 3320 w/factory cab, rear wiper, rear work lights, stereo installed 300 cx bucket with blade small knob tires (for lawn, sorry I'm new and do not know name) backhoe 375 w/24" bucket ballast box 5'...

Once I can get at my backhoe I am going to start a hydraulic project which will require 12 volts back at the backhoe control. Can anyone give me some advice on how to easily pull power off the ignition circuit on my 3320. Bob

Spring is around the corner (today will be the first time above 0/32f in 3 weeks!) so it is time to get ordering a 3320. Reason for the 3320 vs my 2720 is loader capacity. Love the 2720 (60 hours) and is a great tag team with the X585 (will be replacing it with a 748 in the same purchase)...

I broke the one hinge on my 2010, JD 3320 factory cab. What is the part number for the door hinges? Anyone know where to get best price on hinges? Is the hinges hard to change myself? Thanks!!

Hi Guys, Got a little decision I am going to need to make and would like to here some of you guys chime in. Currently have a 2008 2320 (Bought new) with 200CX Loader and 54" MMM. I use almost everyday at our horsefarm. Mowing about 5 acres in the summer, clearing snow in the winter...

I checked with my dealer and they told me the kit is $1300 DOH. Is there a non JD alternative? No way am I spending that

Some background about me. I am a guy that does most of the repairs on my cars, truck, home, guns, bows, boat, bikes, etc. on my own. With that said, I'm also an attorney/CPA in the middle of busy season. We ended up getting a really good deal on a foreclosed house in early January, moved in...

I went shopping for a new tractor. I like the size and looks of the 2520, priced a new 2011 it with 200CX FEL and JD46 Backhoe at $23,500 ($6700 for backhoe WOW!) Anyway dealer called me and he just got in a on trade a used 2006 3320 with 300CX FEL (with 62" bucket-- same bucket as 2520) and...

I need to buy a rotary cutter. I have been looking at the BB60 (priced at $1600 localy). Can my tractor handle the BB72? I also will be mowing about 3 acres with this (for my camp), will this do a good enough job if I keep the blades sharp? The other use will be for me to cut about 14-15 acres...

Good Morning, I need advice as to what mower and tiller to buy and a fair price to pull behind a JD 3320 with Hydrostat. The dealer mentioned the MX5 mower and JD 655 or JD 665 Tiller. I will be mowing land where I cut 2-4" saplings almost to the ground level. I will be tilling a 2-3 acre...

I am planning on mounting a backhoe to my 3320 Im wondering if anyone has made their own rockshaft assist brackets? If so do you have drawings you'd be willing to share maybe even a dxf? If not could someone tell me what thickness the brackets are made of and I'll design a set. or if...

Went to JD dealer been looking at the 3320 tractor tag reads assembled in the USA , asked the salesman about country parts were manufactured .salesguy said engine yanmar , eveything else USA made . Is that true ?

I've been laid up with a bad cold and spending some time studying my 3320 hydraulics and looking for a GOOD way to run a set of limb loppers (or other closed center equipment in general) off my Power Beyond Loop at the back of my tractor. (I'm not a big fan of bungee cords on an SCV). After...

Hi to all 3,000 series owners, i was wondering how many other people have had damage done to the round disc plates that are on the lowest flat point of the front axle assembly wheel hubs. my 3120 is approaching 900hrs, & i do a fair bit of ground leveling with this tractor, but to date have...

Doess anyone know how much weight a 3320 with a 300 loader can lift ?

This is sort of a rethread of an old thread from another area but there were no responses so I figured I would try in this section. I have talked to a couple of JD people and there seems to be a lot of confusion around this. I have seen a couple of 48 backhoes on CL and was curious. I stopped...

I want to use my tractor (3320 with 300cx loader and 375 hoe) to power a hydraulic pruning tool. These pruning tools (ADI or Fairmont) can be open centered or closed centered. Not sure what that means. Do I need open or closed? What do I need for my 3320? Where/how would I hook up to the tractor?

Here is my newest tractor toy for North Dakota winters. It weighs areound 1100 lbs Could blow gravel with this thing for a long time.

Added 2 diverter valves from surplus center. work great. put all on qd's for easy removal. Got the lighted switch at napa. I always label hoses as blue is bottom, and red is right, and anything else for individual stations. I picked up the blower used, and added the hyd deflector and spout...

Looking at a JD 3320 with 200 hrs, 300CX loader, 47 Backhoe for $24000. it is a 2006

I will soon have (hopefully) two hydraulic outputs on the rear of my 3320. I already have a top link cylinder that I bought for a song from my local dealer when another customer bought the entire top-n-tilt kit and only wanted the tilt cylinder. After looking at JD parts I was pretty...

Is there a mount available to mount a 05 JD48 backhoe on a 08 JD3320? Part #...maybe?

Is it possible to mount this 05 JD 48 backhoe on my 08 JD3320 with a frame mount style set up?If so is there a part #?

I am working on a 2005? (give or take a year) 3320. Was going to add some rear work lights. Went to look for the purple and black wires that are usually around the rops base, and cant find them. I have looked everywhere on the tractor. I have done a 2008 3320, a 2009 2520, and a 2005 4720...

Just bought a '07 JD 3320 this spring. Love this little thing. Cab heat and air! Mowing has never been so fun. Only prob with it is the JD quiktach, why won't they just follow every body elses lead and put a standard QT on the thing?

Thanks for everyone's help in the decision. The 2006 (235 hrs)3320 ehydro (and extras I was not aware of) arrived for $20.5K with 300CX, 437BH, 4-1FEL and a Blade. I did not know the blade was part of the deal. The 437 was never used nor the blade. Looks lke new except a bent area on the top of...

I wrote the topic for 3320 Private purchase and have made the purchase with receipt Saturday. The seller has a trailer the had special made for carrying this 3320 with it's FEL and BH plus he added a metal tool box in front. It has removable fenders. The 3320 will arrive on it. The seller of the...

I have a 2006 3320 with 480 hours on it. Recently, when I put the 3 point all the way up, it bogs down the engine. It seems as if it doesn't know it's all the way up and keeps trying to lift. I called the dealer and they want to check the rockshaft and take apart the hydraulics to find the...

What products are out there that I can use as a front mounted snow blower, new or "retrofit", to care for my extensive driveway.

Good Morning, I live in SE VA and am looking at a private sell 4WD 3320 with 300CX and 448. It looks like new and has 253 hours. I have seen it but not tried it yet. The owner is 72 and selling most of his equipment. He said he kept this in the shed. Not sure what he used the 253 hours for as...

After the using my 3320 for a while i start to hear a ticking noise in the rear end. The other day i graded my mile of road half way through it started, also when you look a the back there was some fluid leakage. Is there a serious problem it only has 105hr on the machine.

How hard would it be to add a rear remote to a 2008 3320. What would be the easiest, get a kit from JD or buy a aftermarket. Where would i get a aftermarket kit, which would be cheaper.

I have a 3320 and i just pick up a snow plow. I don't want to hook it up to the fel because of the problems it can cause. I saw a couple of guy mount it the front and used the loader outputs to control it. My questions are what size cylinders do i need, and what is the psi. Where do i get the...

Took delivery of a new open station (no cab) John Deere 3320 back in April. As I did research before ordering the tractor, there were questions I had a hard time finding answers to as well as what sized implements to buy. I thought I would share my findings for others in the same boat. I...

I have a 3320 and i just pick up a snow plow. I don't want to hook it up to the fel because of the problems it can cause. I saw a couple of guy mount it the front and used the loader outputs to control it. My questions are what size cylinders do i need, and what is the psi. Where do i get the...

Hi Guys, I just ordered a 2011 3320 with a rotary cutter and rear blade. It should be here is a couple weeks. I'm looking into a backhoe attachment (not gonna pay JD $7K!) and came across Liberty Backhoes. They are about $4-5k. Anyone know anything about the Liberty brand or know if it is...

I have a small headlight wiring problem on my 3320 . I need to replace the first few feet of wiring from the switch. I need to remove the cowling on one side of the instrument panel to get at the broken wire. Has anyone removed the cowling before ? Is it hard to remove and then to put back on ?

I need to run a hydraulic implement on the rear 3-point. What's the best way to access the front loader 4-function system - the only available connections that I know of? I would expect that the loader operating lever would operate the rear implement if it were to be connected properly. I...

Hi Guys, If I remember someone adjusted the lift of the 3PH to allow easy loading and unloading of BH's. I'm concerned about breaking something, does anyone have the official procedure? Thanks, Rob

So today I attached my old box scraper and was grading the driveway. About halfway down the driveway the box had accumlated a lot of gravel so I hastily lifted it to allow some to spread out. Well I lifted the box too far and one scraper tooth on each side hit the tires at about 8-10mph. It...

Having just purchased a new to me john deere 3320, I am now in the market for some implements. Would consider a light duty grapple, 3pt hitch snowblower, bush hog, pto chipper or pto debris blower. I live about 45 minutes west of Philly and would be willing to drive a reasonable distance for...

Loaded the rear tires on the 3320 this morning, 2 gallons of antifreeze and the rest water in each. What a difference it makes. I had been dissatisfied with the R4s being able to back the 3320 out of a drainage collection basin at the end of the drive way. The deep loose sand always just gave it...

I have researched the 3000 and 4000 Twenty series tractors. The 3000 series will be enough tractor for my needs as far as loader work, bushhogging, and other work. The one thing I do each October is have hayrides. I have previously used a WD-45 but it now has a cracked block and is not...

After buying my 3320 in 2006, I have nothing but trouble and worry from this tractor. While using the tractor for no known reason it shuts off. In has been in and out of the shop for 3 years now with no success. Jd has replaced the fuel pump three times as well as relocated the pump out from...

having trouble making a decision. Used 4510 w/ about 800 hours for $15400, or new 3320 for $19200. Both have loaders, power reverser & 4wd, 4510 has the mid mount hydraulics but I doubt if I'd use it. We have 70 acres but 30 of it is heavily wooded & some is creek bottom, and we won't...

I have been searching old posts to determine the set-up for a Hydraulic top link on my OS 3320. In the past I have read about a hydraulic "splitter" that plugs into the JD quick couplers and provides two hydraulic functions by just pressing a switch. It sounded as though this was not too...

basically I have 3 choices from the dealer. 3520 w/ hydro for 21750, 3320 w/ hyrdo for 20275, or w/ reverser for about $800 less. I am actually considering the 3520 but is it worth the $1500 just for the extra 5hp? I will be running mainly a 5' brush hog and a 5' box blade, and a pto tiller...

I have a Deere 3320 hydro bought new now has 600 hours. It has started to take more RPMs to run in higher range. Example: RPMs are at 2100 after getting up to speed they drop to 1800-1900. It seems like the tractor just won't go..like it is under a load. This seems to be somewhat intermittent as...

I have a 3320 with 600 hours and all of a sudden the bucket won't hold..it wants to fall slowly. All other functions lift, lower, curl up and down, plus the 4 in 1 works fine. Bought the tractor new and haven't had the first problem.

I finally located the 3320 I was looking for via the Tractor House site. It only has 230 hours on it....and looks like new. Has the right stuff for my needs, eHydro, 300CX loader, 3rd remotes WITH hydraulics to the front via optional JD lines, block heater, HD Grille Guard, Big R4 tires and...

I have a 2006 JD 3320 with 300 hours and want to add the 485 backhoe. I'd like to be able to use a 24 inch bucket in clay with this setup mainly for removing stumps. I'm concerned the tractor may not be large enough since it is at the low end of the horsepower rating for the 485 hoe. Does anyone...

I have a 2006 JD 3320 with 300 hours and want to add the 485 backhoe. I'd like to be able to use a 24 inch bucket in clay with this setup mainly for removing stumps. I'm concerned the tractor may not be large enough since it is at the low end of the horsepower rating for the 485 hoe. Does...

Ive located a 3320 open station that I plan to look at next week. Sounds to be what I have been looking for...at a fair price. It has the "larger" R4 tires on it. (43x16-20 4pr rears) I beleive these tires will provide 60" width....which is fine. Can anyone tell me how high this tractor...

First I want to thank the people who helped me in my decisions and options on this tractor. It made a big difference and I have a tractor better suited to my needs due to their help. Roy, Steve, AK, Dave, etc. Thank you. The thumb is a gas! love the 3 speed box with the hydro and the power over...

Well today is the day JD gave for the delivery of the 3320 (ordered middle of May) but I have not heard from my dealer yet. The implements are in and hopefully the tractor should be coming soon. Things are piling up, wood to split, trees to move and woods to clear. Watch, it will come in and...

I just sold my dx45 tractor and looking for a different one. My wife and I decided to get a zero turn mower instead of a deck on a tractor. So now that I don't need a tractor to cut grass, just brush mow till and do loader work. I have to decide witch will work best. I looked at a L39 with 250...

First off let me say up front that my seat time in tractors is about 30 minutes north of zero. However, I'm in the need of a tractor to take care of a 7 acres that will be my new home site. 5 of the 7 acres are older pasture that will be mow-able lawn at some point and the rest is wooded. The...

After a lot of help from some members here I was able to sell my 2320 and bought this new 3320 which was delivered today. There are before and after pics because I put her to work immediately. Mowed about 2 acres of 5 foot tall grass, moved a disgusting compost barrel, and turned my neighbor's...

I'm working on a JD 3320 for a freind. It has some electricial isues comes up with a err 57 code. Checked the com bus seems fine. Cleaned and checked both positive and negutive cables at starter and engine block. Both seamed to have some light dust and engine hade paint under cable. Cleaned...

I have an eHydro that I'm working on, it will run for 2-3 minutes and then shut off with err 57. I checked and cleaned all main electrical connections and tested battery voltage during a key on position. Drops from 12.8 to 12.6 should be fine. I think the only thing left is to change out the...

I'm thinking about what snow blower to get when the time comes, probably around fall. I had the 47" blower on my 2720 and it worked very well over the several years i had it and I like the front blower option a lot but the new 59" front blower is about 5k and I hear it has a plastic impeller...

Have a frind that just ordered a new JD3320 with Year round cab, loader, 5 foot brush hog, 60 inch belly mower, and a 6 foot box blade.

I have been looking for a new tractor. Right now I have a Case DX45 with a L350 loader. I love it but I need some thing smaller for my land. The other day I stopped in a John Deere dealer and looked at a 3320 they had. I really liked the way it looked the features it had and how it drove. I...

Hi all and thanks for the help on my first post... I have the opportunity to buy a Ford Model 101 2-bottom plow but I'm not sure if that plow is a little much for my John Deere 3320, 4X4, Hydro, with front-end loader. No weights or filled tires. It would be pulled in North Carolina clay but it...

I finally got my box blade delivered two and a half months after the tractor came. I built a new garage last fall and have been needing to finish the cleanup since to include work on the drive way. It is a frontier 1374 box and in the half hour I got to play with it before the rain last night it...

I confess I'm a noob and the 3320Cab is my first tractor. I understand that JD can't publish some magic angle that it tips over. Attachments and bucket load and height all have to be figured in. So help me out here. It feels like I'm going over every time I hit a tree root. Without years of...

Hi everyone, I recently purchased a JD 3320 to do some work around the farm. I have 10 acres, and about 7 of it I get hay off of. In the past, a "friend" has been cutting, raking and baling it for me. I'm looking to start doing it on my own. Would the 3320 be able to handle a baler, such as...

OK....so I went to see my local JD dealer and got a price on a new open station 3320 (300cx loader and accessories)....which turned out to be out of the question due to his price ($24,900). I started a search for a used one....and located a like new 3320 with PR Tranny and 300cx loader & 61"...

I have been playing with the JD Configurator....and had a few questions to get the right specs. I'm hoping someone can help along with the right stuff for an open station 3320 tractor with a 300 CX Loader with HD 61" bucket. 1. Hydraulics. I want one pair of remotes at the rear and also...

Working on a new JD3320 purchase. I will need dual rear hydraulics to power a 3pt snowblower hydraulic chute rotation and deflector. Is the LVB24854 Electric Diverter Kit @ $1284 the best choice?

I'm moving onto 6.5 acres late this summer (4 acre horse pasture, 2 acre lawn). I'm seeking 30+hp cab tractor/attachment buying advice. Here is what I want to do: cut rough grass cut lawn grass lift small round bales pasture/paddock maintenance general landscaping & grass seeding blow snow to...

When I ordered my 3320 I opted for the large R4 tires. I see that you can get two R4 tread patterns. One is tighter than the other. Anyone know how to specify which tread pattern I want? Thanks Rob

Here's the package: 3320 (no cab) Big tires (R4) 73" HD bucket 485 BH with thumb ,18" bucket (Thanks for the help on the thumb AKFish) Mid PTO Power Beyond SCV through the hood exhaust Get this, my guy says won't be in until July 22! I know the 3320 is a popular machine but has anyone...