john deere 5075e

My 2012 5075e came with a great OEM battery that lasted over 8 years. Finally had to replace it and tried a group 27 marine battery because that was the size that would fit. It worked ok except when really cold, but was done after 3 years. For the last few months, I had to jump it off every...

I’m in the market for a new tractor. I’m thinking 70-75hp will cover my current and future needs. I’ve looked into nearly all the manufacturers but narrowed down to the John Deere 5075E Premium Cab and the Kubota M4D-071. Both are coming in at the same price. I’m looking for advice from anyone...

I'm getting ready to buy either a 5075e or a M4D. Currently own a JD 4052r and a Kubota B2601 so I'm not necessarily loyal to either brand, both dealers are rather close and seem good to work with. I've really looked at both tractors and each has things I like. I've heard a lot of people...

Hey y'all, new here. Was hoping to find some help with my 5075E. Was out running it a couple days ago and it was shifting into all the gears and acting normal and then randomly one time I went to go back into 3rd from second (just going down the road, no implements running) and the shifter lever...

Cold weather issue on my 2024 5075E with 60hrs. If the outside temp is approx. 20F or less, the cold start advance/noisy injector crackle "mode" will not shut off, but in warm weather it deactivates and runs normal/quiet after 5-10min which is normal compared to my previous 2018 5075E. No dtc...

I'm posting here in regards to a tractor that I want to bring stateside. I own a John Deere 5075E in India, I want to bring one over to the United States. The one I own does not have a AC cab, the one I'm going to buy will have a AC cabin. They are the same model but one just has a cab. They...

One of the two bolts that attach the seat track mechanism to the body of my John Deer 5075E just sheared off. I haven't taken it apart yet but from the look of it this is a hefty screw easily with an 3/8 inch thread. The seat has 2 screws into the tractor body front and back that hold the...

I have a 2012 5075e that ran fine when I shut it down a week ago, and wouldn't crank yesterday. When I turn on the key, the air restriction light is on. That light has never been on before in the 10 years I've had it. I put under 100 hrs a year on it, and change the air filters annually. It...

I'm leaning towards buying a used JD 5075E (vs a 4720), but one thing I noticed is that the reviews for the 5075E here on TBN are much worse on average than for the 4720. But most of the bad reviews are older, suggesting to me that the earlier 5075E's had issues that were later resolved. Is...

Coming up on a new tractor purchase for the farm and my land clearing business, have a 5075e on order currently but have been giving the 4710 a hard look at only a price difference of 20k. Anyone who’s drove one or the other and could give some insight would be great. Both look like great...

I’ve made several reviews of this tractor in the 7-8 years I’ve owned it if you can look back. Just a quick review; it’s a 2013 model I bought new in 2014, open station, 2 wheel drive, 9x3 transmission, no DEF or regenerate. I had dealer add front weight bracket and 5 suitcase weights, an extra...

This is not a one's better than other thread just an observation. I got my M4 last year and my neighbor just upgraded to a 5075 for round baling last week. Saturday I went over to help cut with my M4 and I was shocked at the size difference when side by side, the Deere is tiny by comparison...

Hi everyone new member and first time posting. I looked at and drove a new Massey 4707 and 5075E today. I really liked the 4707 compared to the 5075E. Any input on the pros and cons between these two machines would be much appreciated. I have a small 30 acre farm in southwest VA. with steep...

I live in Oregon and am looking at a 5075E that is going up for auction the end of the month. It is a 2018, 9-speed with 7 hours on the clock. Not sure why it is getting auctioned, but runs and looks like new. What would be a fair price on something like this at auction? No loader, just the...

Tractor is new, all pins in 7 pin connector do what they are supposed to do except the center pin. It should be hot. I have tried lights on and off, key on and off, engine on and off. Still no power. All fuses are intact, in place and plug is wired properly. I need power to run sprayer. The...

Today I started up Deere. 5075E tractor today. Let it warm for a few minutes. Drove it in 2nd gear, low range it’s (3x3, 9 speed) at just above idle for a hundred feet or so. Went to put it in reverse. It was like the gear wasn’t there and wouldn’t go in. Same with 1st gear. I had 2nd & 3rd gear...

So I have gotten pricing from thee John Deere dealers ($48K), and done some online comparisons for New Holland, Kubota and M-F. Seems comparably equipped (55 PTO HP, 12 spd trans, cab, MFWD, loader, rear remotes), the Deere is $7-8 K less than the others? Only model I specifically remember is NH...

I am new to the world of tractors, so I have been educationg myself for the last 4 weeks on what tractor may best suit our needs as we design, develop and build our equestrian business (boarding, lessons, buying selling, etc.). I have settled in on what would meet our needs, and probably a bit...

The tach on my 5075 E is still working but the needle will move all over the scale when on rough ground. After some research I found that the alternator on these tractors have a tachometer connection. Looking at the alternator from the back it is a spade terminal positioned to the right side...

I am currently working in the KSA and have a friend that owns and JD 2018 5075E tractor with a 520M loader mounted, We have found a guy who owns a CNC plasma machine and are wanting the get one made so he can install when we get back home. Is there anyone that can take measurements of the grill...

I致e been shopping for a new utility tractor, and these two seem to have the most power for my budget. Got a quote of roughly 37k for the Deere and 36k for the kubota. Both open station, mfwd, loader, and fluid in the tires. The kubota has cast rear wheels as well. Service is my only concern with...

I noticed it first back in the winter but though it was cold related. It's happening more frequently. The tach/rpm needle will stick or remain on 0 at start up. The dash works fine other than that, hours meter works, lights function. But if I tap my knuckles on glass/plastic lens it will come...

Good evening, The left brake on my John Deere 5075e is hanging up causing excessive heat when performing field work, does anyone know of a quick fix for this or am I looking at a complete teardown? Thx for any responses.

I'm getting ready to order a 5075E tractor equipped to my specs. One of those things is a factory installed 3rd function on the loader. Does anyone have any pics of the joystick with a factory installed third function on one of these, or comparable 5E series tractor? One of my concerns is...

The battery on my 2013 Deere 5075E played out. I bought the tractor new in 2014 so the battery has been in service for five years. Not bad I think. I have heard it was only a three year battery to begin with but I can't confirm that. It's a group 27 670 CCA battery but I have a little more room...

On my new 5075e I cannot keep the engine RPMs steady using the foot throttle. The hand throttle is fine, but using the foot throttle, I am getting a ton of "bounce". Feels like maybe not enough friction, or needs a heavier spring or something. Anyone know if there is an adjustment or heavier...

New member. Exciting day! I just pulled the trigger on a new 5075e with Cab and 520M FEL. I added the 3rd scv, iMatch, rear wheel weights, premium radio, Frontier 7' box blade, Frontier 7' brush hog. I opted for the R4 tires because this tractor will mostly be used for property maintenance as...

My new 5075E was delivered yesterday. I am now already wanting to start modifications to make the tractor as useful for my needs as possible. I am replacing a Kubota L3240 which I had installed the factory 3rd function kit. I initially thought on the new 5075 I would just run the hoses to the...

So I bought a new 2013 5075E in 2014. 0 hours. I knew still was a basic intro level tractor when I bought it and that's what I wanted. No cab, no FWA. I added at the dealer, 5 suit case weights and bracket, fluid in rears, (no calcium) an extra set of remotes, and a block heater. With a half...

Got a pin hole in the sight glass. I guess a rock hit it from bush hogging this AM. I smeared a dab of Permatex and all but stopped the escaping oil. Anybody know how much trouble this is to replace? number 10 below vv John Deere Parts Catalog

Considering a john deere 5075e withloader 2015 low hours for a utility tractor bush hog, snow, post holes and some manure spreading maybe some field work in future. I see quite a few negative reviews! Anyone have experience?

Ok guys looking to upgrade to a 5075e possibly Got a quote on an 18 with cab, FEL, and R4 tires out the door at 49k Question is while looking at the specs there is a decent power loss by the time it gets to the pto. Will this tractor be capable of running a 15' batwing in the future if...

MY 5075E John Deere tractor want start. it was in gear when it was tried to crank. didn't realize it was in gear (not Park). the second time I turned over switch, I hard a whining sound/click. Put it back in park and turn key over.. just a click under steering wheel. all the lights on dish light...

I am in the market for a 75hp tractor. I've been comparing a Kioti RX7320 and a JD 5075e. Both have their pros and cons JD 5075e cons: basic cab, no console mounted levellers, only 2 rear SCV, India made, no screens over rad, right door doesn't come with latch or handle, smaller tires...

I currently have a 2016 3032e. I am in the looking to get into a 75hp tractor. I was looking at a Kioti rx7320 but my JD dealer contacted me and have a 2017 5075e w/ h240 loader and 30 hours on it from using it at events. They can match the price of the Kioti. I'm a John deere fan. Grew up...

I want to know what y'all options are when comparing these two tractors. I'll give you my opinions of what I like better about both tractors. I've been bouncing back and forth on which to buy for a while now and I like them both. I've looked at the current tractor market for about a year now...

I bought a new, very base model Deere 5075E that now has 250 hrs on it and it has performed without issue. However in the last couple weeks of cold weather here in Western KY it has done a funny thing twice in 6-8 uses. The tach has stopped working. Fuel gauge, temp, hour meter, and other dash...

Thanks to everyone that posted to my original post, they were all great comments and really helped me hone in on what i needed. I thought I would post an update to help others with this extremely difficult task. I'm on 150 acres, about 40% woods and 60% previously hayed. Purchased an M7060...

Hey guys, i stubbled across a pre-emissions 2014 Deere 5075E with the 2.9 power tech engine. Its mechanical injection though a BD4 pump.. I like the tractor, it has a/c :thumbsup: Its GUTLESS, in the 540E pro mode it will hardly even run a 6' rotary in light field grass... It is pretty strong...

Hello fellow tractor owners. I'm new on tractor by net. I am seriously considering upgrading from a JD 970 to a JD 5075. Some treads I've read seem to push me to the 5075m rather then the 5075e. M is more trouble free and higher hydraulic capabilities . Please help me understand the difference...

I added rear fender extensions, front fenders, and mirrors so far. The front fenders do look a bit goofy. I plan to move them inboard and rotate them toward the front to give me more clearance. A RH door kit is next.

So i bought a 2013 5075E in 2014, 2wd, no cab, dealer added 5 suitcase weights plus weight hanger block, along with an extra set of remotes. I added a fiberglass canopy and running board mats. It weighed in at 6890 with a half tank of fuel and me not on it. It now has 160 hours on it with most...

When I bought my 5075E I had hoped the 61-62 rated PTO HP would be enough to spin a "1000 LB" round baler in my rolling field conditions. I felt a little better when I saw the "dyno" climb to 74-75 HP before I took delivery. I felt even better when I hooked to a new 459E and headed across the...

I think I can give a fair honest review. I bought a 2013 2wd oos 5075E in 2014. New old stock, never sold, 0 hours, full two years warrenty. Dealer added 5 suitcase weights and bracket to the front, antifreeze to the rears, a extra set of remotes, and a block heater. I added a canopy, floor...

Looking for information as to where the hydraulic relief valve is located on a JD 5075E (possibly a diagram) and how to adjust the pressure. Thanks

Good evening everyone! Need some help here... Model: 5075E, non cab After turning the key, the start fuse immediately pops. I can't find any shorts to ground in the circuit. Funny thing is, this happens when the PTO is not engaged.....when engaged, the key will turn to the start position...

Reactor has broke the a/c condensor connections twice and JD does not have a fix has anyone else had this problem?

The John Deere 5075E rarely makes it off the property or uses road gear, but a few weeks back I made 3 trips (about 4 miles round trip each) over the course of an evening running hay wagons. About an hour or so between each trip. For the most part had it wide open in top gear (18mph). When I put...

I'm looking for the easiest way to make a trainer's seat fit in a John Deere 5075E with cab, 2015 if that matters any. I have been searching for quit a while and mostly found PC threads and a few homemade seats for different tractors. On several thread people have referred to threads on here...

Hey everyone. I'm considering trading my Ford 5610 open station 2wd for a John Deere 5075E 4wd open station. The 5610 is a 85 model with under 3000hrs and in great condition. My biggest question is will the 5075E be a much noticeable difference pulling my discbine. I have a few fields that I...

When I bought my 5075E back in November I didn't get a canopy. Deeres price was just shy of $750. Found one at the Farm Machinery Show for $550 but lets face it I'm tight with a dollar and didn't buy. I found one from a neighbor 5510, very good shape for $100. I think it will fit. I haven't...

Here's a new one: My new 5075e with Power Reverser has developed a new issue. The transmission slams in and out of gear when shifting between forward and reverse, unless the tractor is idled completely down and not moving. This is happening in all three ranges and all four gears. My dealer is...

Just hit 30 hours today and it seems as if the cab heater isn't blowing as warm as it had been up to now. The outside temp was around 30 but I don't think that should matter. It also seems as if the temp gauge is very slow to come up to operating temperature. Is there a warm-up procedure I...

Hello all! I've followed the forums off and on for a while now and always find comments informative and interesting. I'm in the market to upsize my Kubota MX5100 2wd. We have a 30 acre place we have been working on with an excavator, dozer, backhoe, etc. Now I'm done and have grass for the...

I recently bought a new, 2014 5075e with H240 loader. There is a small plastic tool box mounted on a two-piece, bolt-on bracket at the left side of the loader and just above the fuel tank cap. Needless to say, it's in the way Any ideas on a better location for it, or perhaps mine is not properly...

I took delivery of our new John Deere 5075E this week. Two wheel drive, a second set of hydraulic remotes, block heater, 5 suitcase weights and weight bracket on front, antifreeze in rears. (16.9 x 28) She weighed, with half tank of fuel 6870lb with me not on it. She dyno'ed 73hp on the pto, add...

I am looking at a 5055E with 16.9-28 tires and 9x3 Transmission I had it for a SHORT test drive around the dealer's lot. Speed chart seems ok, but looks like C reverse is useless for anything, B reverse seemed fast, A reverse slow (snowblower?) B range looks like only "field speeds" C range...

Hi all. okay here goes. I think I am buying a new tractor (almost positive) and have narrowed it down to these 2. Was quoted LS at $35900 and JD at $36500. the JD dealer told me he would swap the ag tires out for the industrial, and fill tires. The LS has a cab which I think I would like,also...

I know some are a bit criticial of TractorData and the correctness of their info. Anywho went I looked up the 5075E it said 2008-13 models built in India, which I knew, but then said 2013-15 built in Georgia. Any truth to this? Or just a marketing ploy. I would pay a little more a US built...

set my brush hog drown to the lowest level this weekend after a long day brush hogging and some loader work and it didnt raise when i went to lift it back up to move the tractor. after moving the fel a couple of times and working the lever it raised back up. hydraulic level looks good.only 50...

I am considering replacing my 2012 JD 4720 Cab machine with a stronger, heftier tractor. I'm pulling my grain drill more and more and the JD is at the upper limit of it's capabilities with that equipment when on hilly terrain. I've had the opportunity to run a 2013 Kubota L5740 for almost two...

Who here has a 5075E CAB, that wouldn't mind sharing your experience with, and likes-dislikes? I am tossing up the 5075E CAB and the 5085E CAB. I plan to hay about 50 acres of land, mowing, just all around work machine for the land.

I am about to pull the trigger on a new JD 5075E cab. The dealer is still waiting on the 2nd rear scv to arrive so he can install it. Right now, it is still on the dealer's lot. However, once the additional scv is installed, the tractor is mine!! :cool2: I am also getting a 553 FEL and MX8...

Trying to decide whether to buy the 5065E or the 5075E. Will be mowing with a Rhino TS12 batwing which is rated at 35hp minimum PTO HP so both tractors should work fine. The 5075 adds 10 more HP for an additional cost of $2500. Other than that, everything else appears to be the same. Is it worth...

Does anyone have a 5075E, MFWD of course, with front fenders? I couldn't find on the website where they were available(which doesn't mean they weren't). Do they work well and are worth the cost?

Hey - I'm thinking about going from my 4720 cab (260 hrs on it) to a 5075e cab BUT the 4720 is all set up with attachments and lots of options (mid-pto, horn, air seat, cruse, self-leveling fel, 3rd hydro, chains, etc) and I really like the EHydro. the 5075e is attractive because it's more...

I currently have a 2007 JD 4520 ehydro OS with FEL that I have been using for maintaining 10 acres around my home. Mainly bush hogging, loader work, grading driveway etc. I recently purchased the adjacent 100 acres next to my house and I'm looking at upgrading to a cabbed tractor. It mainly...

I have seen some comparisons on the OOS tractors but want input on the cab'd machines. I travel a lot with work, we have cows and 2 small children. I need a machine that my wife can hop into when it is -30 (with kids in tow) and feed the cows a bale of hay. I also want ot pull a baler, swather...

I could use some help deciding which tractor to buy. I am looking at a 2009 5075E with 317 hours for $31,500 and a 2011 5065E with 250 hours for $27,900. Would you say that the extra 10 hp would be worth the extra money even though it is 2 years older and has 67 more hours on it? I am having...

The 4wd M7040 with open cab, 8F/8R hydraulic shuttle, loaded rears, 4 plates, brushguard and canopy and 30 rears is coming in at $29500. The 5075E set up the same except 28 rears and 12f/12r shuttle is just over a $1000 more. I don't know much about tractors, but the JD looks to be built...

FINALLY got my new machine last night from the dealer. It came in almost two weeks ago, but didn't have the 2nd rear SCV that I ordered. So that took ... 2 weeks ... to get put on. :confused: Anyway, it's all a wash now as the new machine is sitting comfortably in my shed! Here are some...

A couple of weeks ago, I ordered a brand new JD 5075E MFWD with the 553 FEL. I took advantage of the new transmission package offering from JD on these open station 5000E series tractors and got the PowrReverser / 540E PTO package that also comes with the digital dash. I had been scouring the...

I reached out to a couple of dealers about the prices on new 5065E/5075E machines. My local dealer seems to have a pretty good quote thus far: 2013 JD 5075E MFWD -553 Loader -PowrReverser 12/12 Transmission -ePTO / MFWD indicator / digital dash (part of the PRT package) -Std. features...

Has anyone seen any of the new 5075e cab tractors on the dealer's lot??? (or any of the 50x5e cab's)

Does your John Deere 50 Series start in Neutral? (When the 3 speed gear shifter (not range shifter) is in neutral (not park)) Go to start the J.D. 5075E today, 9 speed (3gears/3 ranges): first turn of the key: "Click" from under dash but it doesn't turn over. Think maybe the shifter is not in...

Does anyone know then the new JD5075e cab may be available? I have heard August.

HI, I need a tractor with a FEL. Primarily for land maintenance and moving hay bales. The "dream" is bale my own one day. While I was looking at a 10 year old Kubota M6800 the dealer mentioned a new JD 5075E. While the Kubota costs less now-with moderate use, what kind of life expectancy will...

After reading this forum for years and learning as much as I can without posting, I am finally posting a question. I am (this week) planning to purchase a new tractor. My plan is to use this tractor to help get the farm back to its former glory with lots of post hole digging, a fair amount of...

I have a new john deere 5075E and now looking to add counterweight in the front (windrow machine is attached in the back). Need help finding part number for counterweight and also parts that support this counterweight. I really appreciated any help. Sincerely yours, Andrew

Can anyone tell me the overall hieght to the top of the Cab?? JD on line is showing a 30" diffrence in the 2 units wich does not make sense.

Stopped off at the local jd dealer today.. To get some quotes for the 2013 5065e and 5075e with the power reverse. I am trying to keep my purchase no more than 35k.. It is looking like I will have to go with 65e in order to make the deal as the 75 was about 2500 over my budget. First question do...

I've got a 400 acre farm in AL that has about 50 acres of open land and the rest is in forest. I've been keeping it up with a JD5210 in 2 wd and D3B Cat Dozer with a 6 way blade. I bought the Dozer 6 years ago to clear 20 acres of land and to build several miles of fire lanes. I burn about 125...

:dance1: very excited! I'll be using it to bush-hog about 17 acres this year and eventually i'll be rolling my own hay. I will also be maintaining about 2000' of gravel driveway, planting an acre or so of garden ect... Should I have the tires filled at dealer before delivery? Anything else I...

I see where JD is going to offer all the 5000E series models in cabs for 2013. They seem like they will fill the gap between the 4000 series cab and the 5083E cab being about 2000lbs lighter, 7" narrower, 10" shorter in length and 30" shorter in height than the 5083E.... just what I am looking...

my dad and I share a 61 acre farm, 45 acres of which is open and another 16 acres of woods. our 1997 JD 345 has almost 2000 hours on it and is starting to show its age and while our NH T2310 is relatively new, I want to trade it on something bigger. I've been telling my dad about the 1 series...

Do I have to add a remote if I add a grapple to my implement list? I have a rear remote and the mid mount remote for the loader. What grapple would you suggest? What is this going to cost me? Lots of questions...thanks for you help.

This photo is for fishpharmer...this is the best pic I have of my hay fork/spear. This implement can be used as both and I would suggest getting this over a separate fork and spear.

What do you do to keep your tractor secure? Battery isolator switch, chain and lock, or good insurance? Thanks Marty

Just ordered a 5075e with a 9 foot kuhn rotary disc mower to add to the fleet. Now i will be running 3 tractors with 9 foot kuhns and an 8 foot bush hog for. should be able to get some serious grass cut. ill post up some pics when it comes in. Also if anyone has experience with this machine...

Hello all, I'm looking to trade tractors in a week or so due to the "monday morning" tractor I bought last summer. The 09' 5403 MFWD that I own has been in the shop for about the same time I've owned it. I'm working on the seconcd set of front axle seals and the third injector pump on a tractor...

Does anyone see a reason to not get a 5075e over the 5055e, I am new to tractors and decided the tractor I like is a 5055E the dealer has a 5075E in stock and can anyone point out any reason to not get the extra horse power? The price difference is not that big of a difference, i think they want...

Guys- I'm new to the forum, excited to have found a resource like this! Not sure if you can help but after reading JD's website regarding these 2 tractors they are listed with the same engine and the exact same weight?? Not sure how this can be accurate, if so where does the 10hp come from...

I have a new 5075E with 10hrs on it and I noticed a hydraulic leak where the handle for the rear remote SCV inserts into the axle housing. More fluid seems to leak when I raise pull the handle up past the float position. I noticed that the bush hog pull-type does not stay raised as well while...

I'm looking to buy a new tractor with FEL in the 70hp range. I'm considering these two models. For JD, I like the name and resale value that comes with it. I've owned JD products in the past and I've had very good luck. But this is a very basic model and I'm a little leary about the 3 cylinder...

I'm looking for a new tractor. I have about 50 acres of fairly flat land in NW Pennsylvania to brush hog. I'd say 80% of the work would be for mowing and the remainder for loader work and other general utility use. The fields need mowing in the spring and early fall months. I currently own a...