kubota b2650

Second Kubota...no problems except for headlights which only seem to work when they want to. Not surprised the way they sit in the hood and are subjected to such high force when you drop the heavy hood in place. Up until tonight. Tilling, full tank, good oil, soft soil.... then boom... dead...

I knew when the welded on cutting edge wore that I was going to replace it with a much better and stronger bolt on type due to the fact that I am in the business and knew it was the way to go. I did not think it would be in one year but snow plowing my drive and a couple other concrete and paved...

Good morning everyone, I've been asked by a few users here to describe our situation, so I'll tell a few stories and get some photos up. I'll see how this goes, we'll see how often we might have an interesting story. If there is enough interest, I will try to keep this updated with unique...

Wondering if any recent buyers could give me an idea of what they paid for a 60" mmm on a B2601 OR a B2650? Short version, I think my dealer is leaving out a $500 rebate I was promised and pocketing the money. See below for the long version. I've got two itemized quotes: one on a B2601 which...

I'm about to purchase a b2650 from the local dealer. He quoted me $2500 for a 72" Landpride rear finish mower, $2000 for the 60". I have zero experience with RFM, any advice would be great. I have the cash to buy the RFM elsewhere without financing if need be to get a better price, although...

I am trading up to a B series from a bx, and was on the fence between a 2601 and a 2650. I was leaning towards the 2601 until my old neighbor went down to the dealer with me and talked me into the 2650. More power, bigger hydro pump, more versatile backhoe, that kind of thing. He's an old farmer...

Is a 5 foot bush hog to much for a B2650?

I decided to install a bigger tool box on my B2650. I found on at Napa for $12.00. Took the crossbar off that holds the tool box and removed the lights. I then cut off the bracket for the slow moving vehicle sign and moved it as far left as I could and back 3 in for the room for the bigger box...

Just wondering what speed you are supposed to use when mowing with a 60" mmm? I use M on the rough areas and H on the smoother places. I just don't want to push the tractor to much in H, i guess all you have to do is watch your RPM's if they drop your going to fast.

I made the deal today on a new B2650, loader, backhoe with mech thumb and canopy. I hope to take delivery before sunday, but I told the salesman not to hurry as I know he is busy and I want my tractor to get proper attention during the pdi. So I will update when I take delivery with pictures.

I know it is just a tractor but i garage my B2650 and the sun shines through a window all day on to it. I assume it's the suns UV that fades paint just like a cars paint? I plan on getting a cheap UV shade to help. I see a lot of Kubota's that are kept outside all there life and are no longer...

I just installed my 60" MMM does anyone have any tips to install it with ease? My trouble is the deck is so heavy it's hard to get it into position by yourself to mount since the rear wheels of the deck do not rotate. I also had trouble getting the mid pto hooked up since you can not really see...

Hello all, my Wife says go ahead and upgrade!:drool: (She's a good wife, to be sure.) But is it worth it to upgrade? I have a 2009 Kubota BX25 which has served me well, doing everything from digging out stumps to digging out the space for my garage and for my shed, to trenching, digging up...

I went back to the Kubota dealer this morning to inquire about a larger frame than the BX25D. I ran the B2601 they had on the lot and really like the gear drive. But looking at the Kubota website, they have a smaller loader and smaller backhoe than the B2650. I asked if I can get a larger...

Hello Orange enthusiasts! Ive been researching to buy a new Kubota so naturally that means i've also been scouring the interwebs devouring as much info as possible. After all, research is fun (and free)! I have 4 acres, 2.5 woods & 1.5 lawn, with a small pond. Initially, I was looking at...

This will be my first tractor. I own 23 acres, about 7 will be mowed (somewhat hilly terrain), and a 1500 ft driveway (uphill) to maintain. I will also be doing common homeowner things like tree clearing and maybe plowing a garden. I will be using a box blade on the driveway. I really like the...

Haven't been here for a few years. Sold my B3300SU when I relocated from Colorado to the East coast. Lived in Massachusetts for two years until I finally decided to move to Rhode Island and buy a house. Now I needed a new tractor. [emoji2] Started to examine all of the dealers in Rhode Island...

Recently took delivery on the B2650. I bought it a month ago but had the dealer hold it until I could park it inside at the new house. We had about 6 inches of snow, so the initial test was to plow using the bucket only. Driveway is about 300 feet long with a slight grade up from the road. I...

Hello all, I have a question that I wanted to get some input from anyone more knowledgeable than I am. I have a new B2650 ROPS that I installed a pair of led light bars on (1 front, and 1 rear). Each bar is rated at 126Watts and they are individually controlled by switches I put in the dash...

Okay so tried asking on Kubota forum, have the factory 3rd function kit, trying to figure out where the electrical harness ties into the tractor? I can't seem to find the plug(s). I appreciate any help, thanks.

first post here and love all the tips and info. Got a B2650 w/cab this summer and looking to add a grapple, so I ordered the third function valve kit from Messicks and the hydraulics seem pretty straight forward, just wondering where the electrical hooks into the tractor? They (Messicks) said...

Hi, Just purchased a Kubota B2650 with the BH77 and decided to order some rear remotes for it, after talking to the dealer they called me back and said the factory kit (B5340) has a note that says it can't be installed if it has a backhoe. Not having one to compare with or a part to test fit...

Will a Woods RB 600 or 6 Ft. Rear Blade work ok to remove snow on my B2650 Kubota tractor ?

Hello, I've had my new tractor for a coupe of weeks now and have come across an annoyance that maybe some one has a solution to. I have found (twice now) that when I turn myself a bit to the right to watch what I'm doing behind me, my right calf contacts the loader control stick and pushes...

I have a b2650 rops and have found the need for a bigger alternator. Does anyone know of a kit, or if the cabbed one has a bigger one? I'm pretty sure I could make something work but hesitant to go changing to non approved ways at least until my warranty is out. Thanks for any input. Adam

Does anyone know why the optional 25x8.50-14 front / 15-19.5 rear R4 tires are recommended only for the B3350 and not for the B2650? Standard R4 tires on both are 23x8.50-14 front / 12.4-16 rear.

Hello all, I'm trying to decide between these two tractors. I've searched for quite a while on this site and have finally decided that one of these two tractors will fit my needs the best. I have 5 acres and also do some sideline yard work, so I want a tractor that can get around easy. I will...

Went to a Kubota dealer yesterday and looked at these two models. I will plow snow and do light maintenance on the property. The brochures for both models talk about "newly introduced" and "newly designed", and how they bring simplicity, versatility, power and comfort to tough jobs. Maybe it is...

I plan on buying a new B2650 before years end, i was going to buy a front mounted snow blower but have been thinking about the quick attach 60" bucket and 60" quick attach snow blade option. I see very few people with that setup on youtube most have the blade mounted to the bucket. The front...

I now own a B2650 tractor with backhoe and front end loader. When you hook up the backhoe to the B2650 tractor at what position should the hydraulic 3 point lift lever be in when you use it ? Up or down ? The manual says you could blow the seals in the backhoe if you put it in the wrong...

Going to the Kubota dealer this weekend my first pick is the 3350, i will ask about the DPF and see how much they know about it if they say to avoid it or don't know anything about it my second pick is the B2650 or B2601. Does anyone know why the B2601 does not have a 72" MMM when the 2650...

When I ordered my 2650, I didn't think about blowing snow at oh-dark-thirty so didn't have them add the rear worklights. Based on how bright the front incandescents are (or rather, aren't...), that probably wasn't a bad thing. I did order the factory switch to put in the cutout on the dash...

Picked up a set of light duty (2200lb) 42inch pallet forks from Everything Attachments. Here's the link to the pallet forks: Small Compact Tractor and Mini Skid Steer Pallet ForksTheir facility is only an hour from where I live so I drove over their and they loaded me up. These forks weigh only...

Out mowing a meadow and the cab started getting a lot warmer. Come to find out that even though I'd been cleaning the radiators with compressed air and water hose, the AC radiator was mostly clogged with fine chafe that looked for all the world like the aluminum fins. I'll be making a spray...

Hope they pics came through. Delivered sat morning and added 13 hours over the weekend. My first real tractor and been very impressed with what she can do. Mostly old landscaping removal so far. Once I got a little use under my but started to be very productive ripping up bushes and...

I'm a big guy that is looking for a tractor to handle mowing (3 acres with hills and slopes and plenty of obstacles), FEL w/quick attach bucket for moving mulch, topsoil, and relocating snow, snowblade with hydraulic angling, pallet forks, and possibly a BH but don't have an exact job for it...

I will be taking delivery of my B2650 on Mon, and will immediately need to tow stuff with a clevis hitch on the drawbar. What size pin does it take? 3/4"? I assume the tractor will have a drawbar (although from what I recall is quite short....) Thanks for the help.

It is by no means a commercial unit. It's a large glorified homeowner's tractor. It doesn't have the weight or the build of it's bigger brother - the L series. I used dad's BX23 for nearly a decade before picking up the B2650 early last summer. Question is - am I not working this thing hard...

Hello all, New to posting on the site, became a member from reading alot of great post. But now have question of my own. Just got a new Kubota B2650 with Kubota FEL and Backhoe. Alike the old BX22 I had, there is one hyd hose for the backhoe, and that supply hose gets plugged back in to the...

Friend of mine has a B2650 with the cab. It's been sort of hot around here, up in the low 90's recently with high humidity. He had been cutting the lawn during the day - and parked the tractor. Overnight it cooled down quite a bit - into the low 50's. He looks out the next morning - and it...

Added a couple TS LED work lights Navigator 4 in. Round Heavy-Duty LED Utility Light | TractorSupply to the ROPS on my B2650. I fabricated a steel bracket / clamp for the lights so no drilling into the ROPS was required. The spacing between the center of the bolt holes was exactly 1.75 inches...

Just started looking at the Kubota B2650 and have a couple of questions. They are offering a clutch-less HST on this model. Wondering what the pros and cons are by going clutch-less? Also, the brake pedals are now mounted on the left side. Wondering how this will affect the operation? Looks...

A few months back I had a third function remote value and switch installed on my B2650 tractor and loader. I have yet to use it. A couple weeks back the switch fell apart. It's located ont he loader control stick. The switch fell apart without ANY use. I hav yet to even put quick disconnect...

Hello, I have a Kutoba B2650 and using a Powerhorse 3-Pt log splitter. I have purchased the auxiliary hydraulic kit which does a great job running the log splitter. The instructions indicated that when the implement is attached that you connect the kit and when it is not attached that you...

Aside from going with the better dealer, which brand is the better buy? I want to put my money into a solidly constructed machine that will last 20+ years with just normal maintenance. While I know no one has a crystal ball or magic computer, I hope someone can give me some help. I have owned a...

I am looking at getting a 2650 with 60" mmm. Machine will be used to mow about 2 acres mostly open ground other uses will be using 3. Aerator, stone rake, scraper blade etc. I have not seen much chatter about these other than the 3350 and I'm not interested in that unit. I need the 3. Lift...

A great unit BUT the reversible seat sits 3 inches higher than the stock seat when in the forward driving position. This creats an awkward and unsafe operating position. My dealer is looking into it. Any thoughts, comments, or ideas ??

Well, I called my dealer Monday to get an updated status on my B2650 with loader, QC 54" bucket, QC 72" manual blade, 60" MMM, ballast box, RTR 1258 land pride tiller. All is in, but they sent wrong tiller so dealer holding until he can deliver all in one trip. Way weather is, will be next week...

After several rounds of negotiations with the my Kubota dealer, I am getting a difference in quotes of $4300 between the models. Would you bite for the higher HP of the B3350 over the B2650? Also is 13% off of list price a good deal? Thanks - hope to order one of these units within the next...

I'n in the process of buying a B2650 with the front mount 63" snowblower, backhoe and loader attachments. Since I cannot find any manuals to verify, I have a few questions re: installation of subframes for all attachments (preferably simultaneously): 1. Can the backhoe subframe and snowblower...

Looking at buying a box blade for a B2650. Looks like a 60" box blade will barely cover the tire footprint (I bought the 1.5" spacers in case I needed to use/buy chains). Although the box blade will be used for some dirt action, I expect most use to be with snow removal duty with the 63" front...

So I picked up a used Mackissic PTO chipper on CL from a local farmer and ran it last week a few times. The chipper knives were pretty dull and it was a struggle to chip anything larger than about 2 inches. I orderd new knives and it ran much better after I installed them per the install...

I got an hydraulic leak when I curl the bucket. It happened after I was diggin up some soil. Here's a video of the leak. Take a look. Any suggestions? I have an email into the dealer. I'm wondering what he's gonna suggest...

The little tool tray behind the seat A) isn't big enough, and B) does not give me a warm fuzzy feeling storing tools and pins and such next to all that glass. So: I mounted a mini-ammo can to the loader mount. There were three drilled and tapped holes in the loader mount that aren't being...

LA534: Very smooth response. Far better than the B3200 that I had. :thumbsup: Fuel consumption: With 10 hours on the tractor since new 05/15/15 it has used less than 5 gallons of fuel. About 4.5 gallons. About 7 hours cutting brush and heavy weeds with a...

I was pleasantly surprised to find out the 2650 would pull the old disc harrow with ease . Thought I would post this so if anyone else had any doubts you can rest assured it can do the job just fine .

I had posted earlier that my B2650 hydro noise was excessive. To follow up I now have the tractor back from the dealer. They found that the cab was not mounted correctly and was rubbing on the transmission. I am happy to report the noise is now greatly reduced - except - when I use the cruise...

Picked up a RTA1258 tiller earlier this week, and love it. Plenty rugged for what I do. Tilled up the 50x100 garden in no time, and did a great job breaking new ground. Time to give dad's 30 year old JD 30" tiller a break :D I'll get some pics up later when I get them onto photobucket.

Within the last month, I took delivery of my new tractor and since the grass is about to start growing, I decided to play around with the mower deck (install / removal) this past weekend. In doing so, I noticed a concern that my dealer is working to address, relative to the right mower linkage...

Looking for real experience using this specific model (B2650) to mow their grass. Wondering how the size and weight effects the turf. Thanks.

Picked it up at the dealer yesterday after waiting nearly 4 weeks for them to get one in. They couldn't arrange delivery until mid-to-late next week, but I was all done waiting, thank you, so I drove up and picked it up. Got some seat time today and discovered a few things: 1. My Woods 650...

How does the deck lock in up position when not in use? Are the front wheels of deck on a swivel and larger? Back ones large or the small plastic anti-scalp ones? My B2650 has a suspended deck and raises with the rear 3pt and locks in up position with height adjustment knob on floor. How does the...

Got a dumb question about the above. After you drain out the old fluid, how do you make sure that the air is purged from the heater in the cab roof? Does that happen when the thermostat is closed and fluid is forced thru the heating system until the thermostat opens when it warms up? If anyone...

I just received my new B2650HSTC (1.7 hours). The noise from the hydro system is unbelievably loud (low-mid-hi range), I mean you could hear this thing a mile away. I previously owned a L5030HSTC and the hydro noise was very low. I will be contacting the dealer but I wanted to hear what other...

I've got an email in to the dealer so I'll find out eventually, but thought someone here might have one and could tell me: What does the Kubota B2650 have for a winter starting aid? Glow plugs or something similar? Factory block heater? If not, has anybody installed a block heater on a 2650?

Currently have a B2320 with a virtually new BH65 backhoe. Im interested in upgrading the tractor to a B2650 Cab model. Can anyone tell me if the BH65 would fit the BH 77 subframe recommended for the B2650? Sure would like to be able to use it instead of having to buy a new BH77. Can someone...

As the title implies, I am wondering if anyone on here uses a B2650 (or B3350), that replaced the B3030 compact tractor, for snow removal on sidewalks. More specifically, how did you set it up with tires/attachments to end up with a narrow width (or did you care about width)? I recently...

Just took delivery of a new Kubota B2650. First tractor I have owned, my friends will be glad I am no longer pestering them to borrow theirs any more. Found lots of great info on this site while researching for the new purchase.

I had to go out in 0 degree weather this morning to take care of 6 inches of new snow . The tractor is in a heated area so starting was no problem . I noticed when I drove it outside the temp. indicator wouldn't even stay at the 1 bar level even while working the tractor . I read on this forum...

Took delivery a couple weeks ago on my new B2650. ( sorry, no pics, just been working). Got the 60 inch loader and the Bh77 backhoe. First job, was to dig up a drain tile from my garage, that had collapsed. About 40 foot long, and on a serious slope. Quite nervous getting started. The tractor...

I am hoping to take delivery of my B2650 cab tractor in the next week or two. I ordered the tractor with loader, third function, loader mounted snowplow, quick hitch, front mount snow blower and 2 rear remotes. The blower is coming with hydraulic chute rotation, but I opted to fabricate my own...

This a picture of the hyd. fluid that came out of hst filter after the first 50 hours of service , and an open view of the filter element . I could see a very few very tiny specks of metal which was expected . I never dreamed the oil from filter would be this dirty though . The fluid on the dip...

In a few days, I will receive my new, and first tractor from the dealer. Pics will come when it shows up. Its the B2650 with loader and bh77 backhoe. The dealer was waiting for the 4 point mount to show, before they bring it out to me. My question is, I know this is a 3 point mounted backhoe...

I'm taking advantage of Kubota's 0% financing and buying a B series tractor with cab and backhoe, either the 2650 or the 3350. It's a bit of a budget stretch for me to do this and it would cause extra pain to pony up the additional $4500 to get into the 3350. I'll probably have the backhoe...

I notice I'm getting quite a bit of exhaust residue on the left side FEL hydraulic lines on my B 2650. I have about 50 hours on the tractor. The exhaust pipe is about 13 inches to the lines in a direct shot. I can't imagine this is good from a design perspective. The lines will definitely dry...

My dealer is 50 miles away so when I got the tractor I bought hyd. fluid , oil , and filters for the 50 hr. service . I only bought an oil filter ( HH160 ) and one hyd. filter ( HH660 ) as that is what they said I needed . I just looked in the manual and find out there is another hyd. suction...

Does anyone have one of the new Kubota made loader mounted snow plows yet? I am wondering how well they are built and advantages and drawbacks of a quickhitch mounted plow.

I am thinking of trading my B2320 in for a B2650 cab tractor. My question is about front mount snow blowers. The Kubota website lists both a 51" and 63" front blower. I am wondering the pros and cons of each? I think that the 51" might be easier to work with in tight spots, but it is slightly...

Trailering my B2650 Tractor and Reccomended Tie-Downs Just picked up a freshly built tandem 7000lb GVWR landscape trailer at the factory just south of us in Lexington, NC (Kaufman Trailers). I was wondering about tie-down chains / straps to use when transporting a compact tractor like the B2650...

After having my new B2650 a little more than a week, I realized I should have ordered the 3rd function Aux Hydraulics kit for it when I bought it. Everything attachments sells a kit. 3rd function auxilliary hydraulic kits for all brands of tractors and loaders! purchase online, free shipping...

Curious on what the going cost for the 50hr service on my new Kubota will be at the Dealer here in Greensboro? I may have them do it this one time. They want $350 to just ballast the rear tires so I shudder to ask what he may want for the 50 hour service. Replacing the Hydraulics, engine oil...

I see bucket hooks welded on many tractors. Why does Kubota say don't lift anything with your loader except aggregate et-al? It's explicit in the manual. ???

I promised I would share feedback after using my new tractor a few weeks. I took delivery of a B2650 with FEL, rear blade, and a Vrisimo flail mower earlier this month. Primary work for it will be mowing trails (3/4-mile), mowing lawn (1 acre), mowing prairie (4 acres), and plowing a 300 foot...

Got my first tractor.

When I say B2650 blower, I don't mean it is from a B2650, I mean that is the model of the blower. Supposedly it fits the older B series machines like the B7500.

B2650HDC Factory Cab Tractor A/C and Heater +Hydro drive B2782B 63 Snowblower B2714 Quick Hitch B2793 Mid PTO DriveLine B2726 Quick Hitch Frame Support B2756 Hydraulic Chute rotation LA534A Loader w B2356 Bucket & B2366 QuickAttach (These next 2 items are for different Kubotas I...

I purchased a B2650 in May. Purchased with the LA534 loader with the SSQA 54 bucket, 3rd function valve kit for a future grapple and snow blade, R4 tires, telescopic lower links (installed in under 5 minutes), and a RCR1548 cutter. It is almost too big for some jobs in the woods and a more than...

Looking at upgrading to a B2650 or B3350 from my current B2920 Cons with B2650 vs B2920 1.5hp less on PTO Pro's with B2640 vs B2920 A/C Factory cab Position control on 3pt hitch Telescoping stabilizer links on 3pt hitch Bigger tires Heavier tractor Cons with B3350 vs B2920 DFP Greater...

I was at the kubota dealers a couple days back to pick up some hyd. fluid and filters . The person at the counter mentioned that kubota has sent them a couple of items to replace on B2650's , one I believe had to do with a battery cable and the other was to replace something to prevent a hyd...

Hi all. I've been enjoying my B2650 for a few weeks now and the backhoe attachment finally arrived this week and was installed. I was highly disappointed when I plopped down into the seat only to be greeted with a bone-jarring thud! The seat was one of the features that I liked about he...

I noticed that the new B2650 with ROPS comes with a side step. Would someone be kind enough to give me the measurements (and maybe a couple close-up pictures) for mounting the step? I have a B2920 and would love to have a step. Thanks in advance. Jim

Hello everyone Been reading here for awhile finally signed up. So I am in the market for my first tractor. I have two aces right now and plan on buying a bigger place in a couple years. I will use the tractor for loader work, MMM, and whatever I can figure out. So far I am looking at john deere...

Pulled the trigger on a new B2650. It's coming with the 60" light material bucket, two-lever skid steer attachment setup, and pallet forks. I'll have the heavier duty 54" bucket on the way soon. I really hope in the next year or so to add a 3pt wood splitter and possibly a belly mower. I...

Are the mid-mount mower decks on these drive-over like my B20 series tractor? Also how is the cab noise? Is there more hydro whine than my B2620 when working hard?

After lurking on the site for about 9 months and reading all the pros and cons of the different makes and models I purchased a B2650 with the quick attach bucket and the Land Pride RCR1548 cutter. It was delivered last Monday and this weekend the hour meter is just shy of 10 hours. I have had a...

Well I think spring is near so I removed the front mount snowblower on my B2650 kubota tractor and mounterd the FEL for the 1st time today..Tractor was new in Dec and arrived with the blower installed and the FEL on a wood pallet. Got every thing hooked up and working wirh the FEL with one...

Been looking to maybe get a cab for my B2620 to keep me warm while moving snow around. Happen to be at my dealer and looked over the 2650 cab model. What a beautiful machine! Same motor as my 2620 (no particle filter) but has a killer cab! Almost pulled the trigger except the cost to trade up...

Looking for advice on a 3PH Tiller to put behind a Kubota B2650 (26HP/19.5HP PTO). The dealer where I'm buying the tractor only sells Woods, which I understand to be a good brand, but the one he has in stock is their lower end model, only 4 tines and pretty darn expensive. I have looked at the...

Hi, Looking for advice on a 3PH Tiller to put behind a Kubota B2650 (26HP/19.5HP PTO). The dealer where I'm buying the tractor only sells Woods, which I understand to be a good brand, but the one he has in stock is their lower end model, only 4 tines and pretty darn expensive. I have looked at...

Hi All, A couple days ago I pulled the trigger on a new B2650 with FEL and 60" MMM. As soon as it gets delivered (hopefully next week) I'll be a proud new orange card carrying member. People here have already been very helpful doing my shopping around period, and I have no doubt that I will be...

Here's part 1 of adapting a Kubota snow thrower to a TX Iseki. You might want to wait until it's done before setting out to convert one though. I have no idea when and if I'll actually get it done, so bear with me in the interim. The only potential problem I can see at this point is the drive...

Here's the pics of my new B2650, got the quick attach plow, Landpride pallet forks, two remote valves, 72mmm and 5ft box blade. I also ordered the new Landpride grapple but they are not going to start building them until April. Can't wait to use it!!!

Been looking everywhere and not seeing much info out there. Limited supply or maybe not selling that well? The last few days of snow blowing really, really have me wanting a cab tractor. I currently have a B2320 and like the size of it. Plus I figure I can keep my implements I already have...

Is the new Kubota B2650 have enough @ 26 hp for the 63 inch snow blower? My John Deere 4115 had a 47 inch snow blower @ 24 hp and that with 8-10 inches of snow would start to lug down pretty good. Any thoughts and comments appreciated.

Does anyone know how to translate this Kubota Tractor serial # 50776 ?

Do any of the members put the kubota B2650 in their garage with standard door openings?

Does the Kubota B2650 have a horn installed as standard with the Cab?

I ordered the Kubota B2650 with Turf tires, 51" snow blower, 60" mid mower deck and 60" loader. Should be here 12/27/2013 My rear tires will be weight loaded, @ 12 psi What is the highest point, the cab roof, mirror's or lights? What pressure do you run in rear tires? I have all the Kubota spec...

Just looking for opinions on which cab tractor to buy. Seem to be almost the same, one question I have is what is the diff between Hydostatic power steering and reg power steering, and which is better??? Are the breaks on the left (2650) that important. Is the 2650 not as loud? For now...

I named this thread "info and hints", as I'd like it to cover more than just problems. Just got my new B3350 yesterday :). Impressive machine with a lot to like, more glass than a PopeMobile . . . the cab is excellent, though being "walled off" from the world with glass will take some getting...

Like the title says, I was at my dealers today and was looking at a new B2650 cab tractor they had on the lot when the salesman came out. He asked me if I wanted to take it for a test drive and, of course,I couldn't say no. He opened it up and started it for me then said, take your time and...

Does anyone know how to wire the dashboard switch for the rear worklights for a Kubota B2650?

Hello. Everyone. Thanks for all TBN member to share information. I have a simple but hard-to-find question. Kubota B2650, has DI(Direct injection) engine or IDI(In-direct injection) engine? If someone knows, please let me know. Thaks..

It looks like Kubota Canada has posted some additional information in a recent brochure they're going to be distributing to customers (although, this information doesn't seem to be found anywhere on their web site yet.) NEW Factory Cab B2650 & B3350 Kubota Final Tier IV Diesel 26 & 33 Hp...

I continue to have failure with the tension pins (slotted spring pins) breaking on the chain gear drive. They are a huge pain to remove and replace. I've seen posts here that recommend welding the chain gear directly to the shaft. Just wondering if there's any risk with this solution. Also...

I just bought a used B2650 snowblower for my B2400 tractor. It comes with the hydraulic lift and subframe mounts, plus a hydraulic chute direction controller and a hydraulic chute diverter. The one thing that it does not have is the PTO shaft. Anybody out there have one? Any gret secrets that a...

In the past I posted that I was converting a B2650 snowblower to fit the BX2200. I received several inquires as to my progress and whether it would work. The B2650 was designed to fit the B-series tractor. Thankfully the frame widths were similar so converting the mount was relatively easy. The...

Been looking for a blower to work on my 12HP rear PTO Saw this on ebay, and thought it sounded like a good deal - plus the front mount option let's me use either the rear PTO (more pain in the *ss) or the front option which will let me use the mid PTO, and therefore have continuous blowing (as...

Looking for a PTO shaft with 10 spline yokes, even if the length isn't right.

I'm in the process of modifying a B2650 to work with my bx2200. The mid pto on the bx is 2500 rpm. What speed is the B2650 snowblower design to run at?

I'm looking at a B2650 front mount snowblower for use on my 2003 B7500 HSD. The snowblower was bought new with a 2004 B2410 HSD. Both tractors have FELs (LA302, LA352) and RCK60-24B MMMs. Does anyone know if the subframe and PTO are the same for both tractors? Also, the current owner of the...

I am rebuilding my B2650 blower and ran into a problem. The gearbox shaft that runs rearward to the drive has a bearing with two bearing plates right where the shaft passes through the housing. This is held with 3 carriage bolts. The parts assembly shows the bolts come through the housing from...

My blower blew yesterday and I'm trying to figure out why. It was bought used from a dealer. I just noticed that the exploded parts diagram in the manual shows the shaft housing mounted ON TOP so that the flange is ON TOP of the square tubular subframe . Mine was mounted ON BOTTOM of the...

Howdy TBNers, I recently aquired the majority of a B2650 snowblower to put onto my B2150HSD. Problem is that I don't have the manual and I am sure at least some of the mounting hardware is missing. If anyone has a manual they are willing to copy and either email or snail mail I would be very...

I have a B2650 front mount mid pto snowblower, and was wondering what it is worth. It is in good shape, the tractor it came on had only 325 hrs on it when I bought it. I now have a loader and would like to sell the snowblower. Thank you.