1026r curl function backflow

   / 1026r curl function backflow #1  

swick1

Platinum Member
Joined
Jul 11, 2007
Messages
860
Location
WV
Tractor
John Deere 1026R
When I have to curl with my pallet forks on unless I move the valve all the way open very fast I get backflow through the circuit and the forks drop a couple of inches before curling back properly. Is there an easy fix to this problem? It makes bulky items scary to lift.
 
   / 1026r curl function backflow
  • Thread Starter
#3  
Where would this valve be located? Before the valve block?
 
   / 1026r curl function backflow #4  
I think this is a known issue with the 1-series -- talk to your dealer about it. There is a fix they can apply.
 
   / 1026r curl function backflow #5  
I had the same problem. The dealer replaced the SCV and everything worked properly after that.
 
   / 1026r curl function backflow
  • Thread Starter
#6  
Thanks. I'll visit them tomorrow and let you know what they say!
 
   / 1026r curl function backflow #7  
The load check valve is usually in between the work ports.

Remove and inspect, clean, or replace.
 
   / 1026r curl function backflow
  • Thread Starter
#8  
They say the dropping is normal and all the 2000psi tractors do it
 
   / 1026r curl function backflow #9  
Don't buy that -- they are selling you a line of BS. It should not do that.
 

Tractor & Equipment Auctions

2018 John Deere 524K-II Articulated Wheel Loader (A50322)
2018 John Deere...
2022 Unverferth Seed Pro 410 (A47164)
2022 Unverferth...
2008 J&M 1000 Grain Cart (A47164)
2008 J&M 1000...
2021 Kubota RTV X900 4x4 Utility Cart (A50322)
2021 Kubota RTV...
Pair of Tractor Tires on Rims (A47164)
Pair of Tractor...
(INOP) CUB CADET 124 LAWN MOWER (A50459)
(INOP) CUB CADET...
 
Top