1026r curl function backflow

   / 1026r curl function backflow #1  

swick1

Platinum Member
Joined
Jul 11, 2007
Messages
860
Location
WV
Tractor
John Deere 1026R
When I have to curl with my pallet forks on unless I move the valve all the way open very fast I get backflow through the circuit and the forks drop a couple of inches before curling back properly. Is there an easy fix to this problem? It makes bulky items scary to lift.
 
   / 1026r curl function backflow
  • Thread Starter
#3  
Where would this valve be located? Before the valve block?
 
   / 1026r curl function backflow #4  
I think this is a known issue with the 1-series -- talk to your dealer about it. There is a fix they can apply.
 
   / 1026r curl function backflow #5  
I had the same problem. The dealer replaced the SCV and everything worked properly after that.
 
   / 1026r curl function backflow
  • Thread Starter
#6  
Thanks. I'll visit them tomorrow and let you know what they say!
 
   / 1026r curl function backflow #7  
The load check valve is usually in between the work ports.

Remove and inspect, clean, or replace.
 
   / 1026r curl function backflow
  • Thread Starter
#8  
They say the dropping is normal and all the 2000psi tractors do it
 
   / 1026r curl function backflow #9  
Don't buy that -- they are selling you a line of BS. It should not do that.
 

Tractor & Equipment Auctions

1500 Gallon Water / Chemical Tank (A50860)
1500 Gallon Water...
2018 Toyota RAV4 Hybrid XLE AWD SUV (A50324)
2018 Toyota RAV4...
13 Desktops (A48083)
13 Desktops (A48083)
2016 Gravely Pro-Turn 260 60in Zero Turn Mower (A48082)
2016 Gravely...
https://www.accessnewswire.com/newsroom/en/healthcare-and-pharmaceutical/slimjaro-vs-burnjaro-reviews-a-comprehensive-analysis-of-benefits-and-1044755
https://www.accessn...
Tennant S30 Ride-On Sweeper (A49346)
Tennant S30...
 
Top