2305 FEL Float problem

   / 2305 FEL Float problem #1  

raykos

Silver Member
Joined
May 22, 2007
Messages
132
Location
Central Pa.
Tractor
JD2305
Hi all,

I'm having a problem figuring out how to get my FEL into and out of the float postition. I remember reading about how to in one of my manuals, but I'll be darn if I can find it again!? Whenever I first started using the FEL, it seemed like I couldn't get it to float, now when I lower the bucket and want to scrape backwards, it seems to immediately go into the float position even though I don't want it to? I guess I must be doing something wrong without knowing it? What is the correct way to get the FEL into and out of the float postition?

Thanks,
Ray
 
   / 2305 FEL Float problem #2  
To get into the float mode, a quick-sharp push forward on the joystick to get past the float detent. The joystick should remain forward and not return to the center.

To remove, just pull the stick back a little...

If yous is going into float to easily, then there may be a small problem.
 

Tractor & Equipment Auctions

2013 Ford F-150 XLT - EcoBoost, Blown Engine, Good Parts Truck (A51039)
2013 Ford F-150...
2017 Ford Fusion SE Sedan (A48082)
2017 Ford Fusion...
2005 International 4300 Heil Dump Truck (A50323)
2005 International...
2021 Case Trident 5550 Spreader (A51039)
2021 Case Trident...
2003 Chevrolet Silverado 2500 Pickup Truck (A48081)
2003 Chevrolet...
1993 Triple Crown 16ft.T/A Utility Trailer (A48082)
1993 Triple Crown...
 
Top