2305 FEL Float problem

   / 2305 FEL Float problem #1  

raykos

Silver Member
Joined
May 22, 2007
Messages
132
Location
Central Pa.
Tractor
JD2305
Hi all,

I'm having a problem figuring out how to get my FEL into and out of the float postition. I remember reading about how to in one of my manuals, but I'll be darn if I can find it again!? Whenever I first started using the FEL, it seemed like I couldn't get it to float, now when I lower the bucket and want to scrape backwards, it seems to immediately go into the float position even though I don't want it to? I guess I must be doing something wrong without knowing it? What is the correct way to get the FEL into and out of the float postition?

Thanks,
Ray
 
   / 2305 FEL Float problem #2  
To get into the float mode, a quick-sharp push forward on the joystick to get past the float detent. The joystick should remain forward and not return to the center.

To remove, just pull the stick back a little...

If yous is going into float to easily, then there may be a small problem.
 

Tractor & Equipment Auctions

2021 Chevrolet Silverado 1500 4x4 Crew Cab Pickup Truck (A48081)
2021 Chevrolet...
2025 70in Dual Cylinder Grapple Rake Skid Steer Attachment (A49346)
2025 70in Dual...
2014 International DuraStar 4300 Terex BT3063 30,000lb 63ft Crane Truck (A48081)
2014 International...
2015 Ford Escape AWD SUV (A50324)
2015 Ford Escape...
2025 25ft. 800Amp Extra HD Booster Cables (A48081)
2025 25ft. 800Amp...
2013 Hyundai Veloster Hatchback (A48082)
2013 Hyundai...
 
Top