27-2910 Toplink
- Thread starter ronjhall
- Start date
- Views: 5641
OP
ronjhall
Super Star Member
GlueGuy
That looks like the same bracket. Sure those aren’t copies of my photos. /w3tcompact/icons/wink.gif
That looks like the same bracket. Sure those aren’t copies of my photos. /w3tcompact/icons/wink.gif
jasonf
Silver Member
Right on! how much could it cost per macine ? I would pay the extra $10 that it costs them and they would then be able to brag about how heavy duty the tractor is in the sales info........
GlueGuy
Veteran Member
- Joined
- Jan 24, 2001
- Messages
- 1,654
- Tractor
- Kubota B7500
My cost was about the same as Ron's. $73 for the bracket, and $5 for the bolts (they actually sent me a handful of each type). So I guess I got a few extra bolts.
Took about 30 minutes to R&R the brackets. Had to drop the boxblade from the 3PH, and remove the toolbox to gain access to the bolts under the seat.
Took about 30 minutes to R&R the brackets. Had to drop the boxblade from the 3PH, and remove the toolbox to gain access to the bolts under the seat.
GlueGuy
Veteran Member
- Joined
- Jan 24, 2001
- Messages
- 1,654
- Tractor
- Kubota B7500
OP
ronjhall
Super Star Member
Glueguy
My 2910 does not have a vent tube in that location. I looked though my Parts List and could not find it. The only vent or breather that I could find for the transmission was where the PTO and transmission input shaft goes through the clutch housing. I'm sure there is one but at this time I can't find it. May be some else on TBN knows where it is on the 27-2910 tractors.
My 2910 does not have a vent tube in that location. I looked though my Parts List and could not find it. The only vent or breather that I could find for the transmission was where the PTO and transmission input shaft goes through the clutch housing. I'm sure there is one but at this time I can't find it. May be some else on TBN knows where it is on the 27-2910 tractors.
Flip the seat forward and look on the left side of the rockshaft
(hyd. cylinder) cover I think that's where the "rear" breather is on those, but then again I may be confusing it with the "Ls".
By the way, Good call on the HD top link bracket. I'd recommend that option for all Kubota's even if you don't have a backhoe. Cheap insurance....
(hyd. cylinder) cover I think that's where the "rear" breather is on those, but then again I may be confusing it with the "Ls".
By the way, Good call on the HD top link bracket. I'd recommend that option for all Kubota's even if you don't have a backhoe. Cheap insurance....
OP
ronjhall
Super Star Member
Kubmech & Bird
With you two experts advising me on the location, /w3tcompact/icons/clever.gif I'm not even going to check if I have one. /w3tcompact/icons/wink.gif
With you two experts advising me on the location, /w3tcompact/icons/clever.gif I'm not even going to check if I have one. /w3tcompact/icons/wink.gif
