3510 Hydralic Hookup

   / 3510 Hydralic Hookup #1  

Stimw

Elite Member
Joined
May 6, 2005
Messages
2,595
Location
N. E. Florida
I got a good deal on a Jinma Backhoe and I plan to hook it up on my 3510 Branson. Mounting is not a problem because I own a Welding/Fab shop and I can build a sub frame to fit.
What I need to know is if the rear hydralic hook ups come as a kit to add on to the tractor? Price?
Looking under the right fender I can see 2 ports connected with a bypass fitting, is this where it would connect? Tractor owners manual shows a maze of lines connecting at this area but no kit for hook up.
Also are hydralic fittings standard or is there US and metric?
Hoe came with a pump but it is designed for the Jinma. I could adapt it to PTO shaft but it is designed to turn CC by the arrow on pump.
 
   / 3510 Hydralic Hookup #2  
The Jinma pump will spin at the wrong rpm, it is sdesighned to run off the shaft that drives the pto shaft, You might also want to do alittle bit of modifications to the LW backhoe prior to usage, We had several that self destructed, The LW6 was better than the LW 7,The biggest issue was the cylinder rod would shear off where it pins to the end, "V" out the end and weld a nice bead was the fix for that but in your sandy soil it may not be an issue. Best bet for the hydraulics is to get the proper backhoe hydraulic kit.You can PM me for a quote-Good luck
 

Tractor & Equipment Auctions

2016 Big Tex 24ft. T/A Flatbed Trailer (A50322)
2016 Big Tex 24ft...
2017 JLG Skytrak 6036 6,000LB 4x4 Rough Terrain Telehandler (A50322)
2017 JLG Skytrak...
2015 VOLVO ECR88D (A50854)
2015 VOLVO ECR88D...
2008 Ford F-250 Knapheide Service Truck (A50323)
2008 Ford F-250...
Landoll Hauloll (A51039)
Landoll Hauloll...
1998 Ford F800 2,000 Gallon Water Truck (A49461)
1998 Ford F800...
 
Top