Advice on building a ramp

   / Advice on building a ramp #21  
Get some surplus PSP (perforated steel plate) from one of the air bases or a scrap yard and you can have either a permanent or temp solution.
 
   / Advice on building a ramp
  • Thread Starter
#22  
What exactly is funny. All I see is some good advice for cheap fix and a few deep pocket avises but still workable.

Re: Advice on building a ramp
Oops, sorry Gary,

I was referring to the post by BeezFun and his "witness protection program" comment.
The advice has been awesome. Thanks again to all of you!
 
   / Advice on building a ramp #23  
Would putting geotext and then soil/sand help keep it from washing out in a rain event?
 
   / Advice on building a ramp
  • Thread Starter
#24  
Again, thanks for all the ideas!

I rearranged the rocks so the flat sides were up and then filled the voids with the smaller rocks sand from the wash. Took about 1.5 hours.
The only issue I had was the 113 degree heat and the large rattlesnake sleeping in the riprap about 10 yards from my work area!
Now I need to find a sunshade for my tractor!
 

Attachments

  • IMG_1533.jpg
    IMG_1533.jpg
    620.8 KB · Views: 188
  • IMG_1534.jpg
    IMG_1534.jpg
    704.6 KB · Views: 190
   / Advice on building a ramp #25  
Nice job :thumbsup:

Brave working that close to a snake - I'd be long gone :ashamed:
 
   / Advice on building a ramp #26  
That second pic defintatally puts it in perspective as to why you couldnt just cross as is:eek:

Very nice job on making it passable:thumbsup:
 
   / Advice on building a ramp #27  
That second pic defintatally puts it in perspective as to why you couldnt just cross as is:eek:

Very nice job on making it passable:thumbsup:
 
   / Advice on building a ramp #29  
If you wanna send me those surplus rocks, I've got a few mudholes to hide them in......
 
   / Advice on building a ramp #30  
Again, thanks for all the ideas!

I rearranged the rocks so the flat sides were up and then filled the voids with the smaller rocks sand from the wash. Took about 1.5 hours.
The only issue I had was the 113 degree heat and the large rattlesnake sleeping in the riprap about 10 yards from my work area!
Now I need to find a sunshade for my tractor!

nice job!

BAH! 113 degrees in Arizona, is not that bad, you have no humidity! granted 113 is still ugly temp!
 
   / Advice on building a ramp #31  
nice job - simple and looks like it works great !

Also if a flash flood takes it out you can just do it again.
Next time you can probably do it in 1 hour flat. Depending on the rattlesnake !
 

Marketplace Items

Brock 60'x26' Flat Bottom Grain Storage Tank (A57148)
Brock 60'x26' Flat...
2019 BOBCAT E45 EXCAVATOR (A59823)
2019 BOBCAT E45...
2019 FREIGHTLINER WATER TRUCK (A58214)
2019 FREIGHTLINER...
RoGator RG1100C (A61307)
RoGator RG1100C...
2012 VOLVO VNL (A55745)
2012 VOLVO VNL...
UNUSED FUTURE BD98-98" HYD BACKHOE DIGGER (A60432)
UNUSED FUTURE...
 
Top