Nightforce
Silver Member
- Joined
- Aug 6, 2014
- Messages
- 165
- Location
- Rehoboth, MA
- Tractor
- Kubota BX25D, John Deer D140, Craftsman GT6000
WOW, looks like a first class job to me! I've enjoyed the step by step photos of its progress....
Another Trailer Build?
- Thread starter The Fred
- Start date
- Views: 23086
OP
The Fred
Veteran Member
More pix:
Regards, or regrets not sure yet, Fred
Regards, or regrets not sure yet, Fred
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,276
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
It looks like a gooder-un! :thumbsup:
Nightforce
Silver Member
- Joined
- Aug 6, 2014
- Messages
- 165
- Location
- Rehoboth, MA
- Tractor
- Kubota BX25D, John Deer D140, Craftsman GT6000
What a first class operation!
OP
The Fred
Veteran Member
Yes Dave since this is going to be an on road off road trailer I need to incorporate lights into the rear somehow strong and stealth so I don't smash them off in the woods. Thinking of incorporating somehow with the tailgate latch assemblies.
Thinking the tailgate will hinge up AND down so it could be used to haul dirt even though I have another trailer for dirt, double hinged tailgate would make it more sale-able down the road as would on road capability.
Ordered dual 1.75 x 23 inch hydraulic cylinders yesterday.
Regards, Fred with his thinking cap on.
Thinking the tailgate will hinge up AND down so it could be used to haul dirt even though I have another trailer for dirt, double hinged tailgate would make it more sale-able down the road as would on road capability.
Ordered dual 1.75 x 23 inch hydraulic cylinders yesterday.
Regards, Fred with his thinking cap on.
OP
The Fred
Veteran Member
Always questions.
Which way to mount the hoist cylinders:
http://www.plowsite.com/showthread.php?t=146664
Pretty good discussion here. Right over my head.
Fred
Which way to mount the hoist cylinders:
http://www.plowsite.com/showthread.php?t=146664
Pretty good discussion here. Right over my head.
Fred
OP
The Fred
Veteran Member
More info on dumping angles for different materials. Have all the steel I need but not enough knowledge, still studying.
Dumping Angles
Blew the whole day today thinking about cylinder angles, my head hurts. Tomorrow I start with my hair-brained idea. I'm either a genius or an idiot, time will tell.
Regards, Fred
Dumping Angles
Blew the whole day today thinking about cylinder angles, my head hurts. Tomorrow I start with my hair-brained idea. I'm either a genius or an idiot, time will tell.
Regards, Fred
Last edited:
dieselcrawler
Elite Member
Off topic... nice lift, like the jib crane incorporated into it.
... what's the old truck in the backround?
... what's the old truck in the backround?
OP
The Fred
Veteran Member
The lift is 10 years old buts seldom gets used. I have 3 of those (2 at another location), they are nice units with no cables or chains just one hydraulic line on the ceiling that uses a valve to keep level. Lifts are made near Montreal. The trolley goes up and down with the lift. $1,000 dollar option if I remember correctly, well worth the money.
Model A truck is a customers.
Regards, Fred
Model A truck is a customers.
Regards, Fred
