Any info on B3300?
- Thread starter msengstock
- Start date
- Views: 18243
-
- Tags
- kubota b3300su
MessickFarmEqu
Super Member
OP
msengstock
Bronze Member
Thanks for the info. Makes more sense now.
Tom_H
Veteran Member
Anyone have more info.? 3 or 4 cyl. engine? Anything to address the vibration issue the 3200 has had? Will it take an MMM? If so, will it be free-floating/suspended or full weight on wheels?
MessickFarmEqu
Super Member
its a 4 cyl. The "vibation issue" is one of those things that seems to only really exist on the internet. I've never run into it. I don't think it will take a MMM... the 'SU' tractors are pure utility machines and they probably cut the mid PTO to save cost.
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,719
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
You didn't say this same thing about the abrupt stop in reverse on the 50 series, did you? As you can see I have a B3200 and it doesn't seem bad to me at the RPM's I run it. Around 2000-2200 but is does increase some with higher RPM's but still not a problem for me. BX's and L were/are smoother and I believe my former B7800 was similiar to my current B3200.
PSDStu
Platinum Member
- Joined
- Jul 28, 2004
- Messages
- 793
- Location
- Marianna, FL
- Tractor
- Kubota, M7060 HDC12, L4060 HSTC, RTV 1140
So because you haven't run into it...... it must not exist.....hmmmm.... thats interesting.....if your ever down in the Florida Panhandle I can show the "vibration issue".
Stu
Tom_H
Veteran Member
Does the engine have greater displacement/torque than the 3200 or is this the same engine ramped to higher RPM in order to rate it @ higher hp?
MessickFarmEqu
Super Member
Same engine I think. I also think its 32Hp. I did not attend the meeting where the info was given out for these... this is just what I remeber being told. These don't ship for a few months yet.
No. I did not. That was a pretty legit problem... over blown in my mind.. but legit. I did say that about the mystical jerky L3400 3pt. That's probably what your thinking.
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,719
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
Maybe I need to stop by Barlows and look and ask questions and find out all the info about this new piece of equipment and just chant "I'm not going to buy, I'm not going to buy, I'm not going to trade, I'm not going to trade". Would it be safe? Should I chance it? Should I pull my trailer with me when I go? Should I have my B3200 on the trailer?
What do you FRIGGIN' mean? That the FRIGGIN' JERKY 3ph was a figment of my imagination... You have GOT to be KIDDING!?!?!?! Maybe because the suspension seat was not working that it felt so bad... I don't feel like getting thrown off this board today but what you just said @#$&*$*$(...
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,845
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
.Maybe I need to stop by Barlows and look and ask questions and find out all the info about this new piece of equipment and just chant "I'm not going to buy, I'm not going to buy, I'm not going to trade, I'm not going to trade". Would it be safe? Should I chance it? Should I pull my trailer with me when I go? Should I have my B3200 on the trailer?
C'mon John, it's a short month, wait till March. No need for the trailer, they can swap.
Besides, your probably on their milk run.
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,719
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
To late. I went the next day and traded B3200 for a BX25. Didn't take trailer and am waiting for delivery/pickup now. Probably next week. Guess who has a B3200 34 hours FEL for sale now with 12" Auger PHD, Landscape rake and 6' Landpride RFM that won't fit or I don't need? I think they'll deliver my RatchetRake with the tractor if someone will pay me the price of one to fit a BX instead of the one I have now for the B 60" bucket..
C'mon John, it's a short month, wait till March. No need for the trailer, they can swap.
Besides, your probably on their milk run.
Evil the Weasel
Platinum Member
JohnThomas-
Are you getting paid by Barlows to plug them in every post?
Are you getting paid by Barlows to plug them in every post?
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,719
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
No. Are you a dealer?
Evil the Weasel
Platinum Member
No, I'm not a dealer. Are you?
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,719
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
No. If your interested you can read my public profile.
If this were a Health forum I would always tell how good Dr Harry Kennedy is after 30 years experience with him, never about Dr's i don't use. If this were a Teeth forum I'd always tell how good Dr Timmy Tohill is after 30 years experience with him and never about Dentists I've never used. If this were a Cheap Taco Food forum I would tell about Taco Bell since that's where my experience with cheap Tacos has happened and never about other cheap Taco fast foods I'd never ate at. If this were a Mountain travel forum I'd tell about how awesome the mountains are out west and in Alaska and never about the mountains in Switzerland where I've never traveled. If this were a Religion forum I'd always talk about Jesus and never about Budda whom I've never had a relationship with. If this were a Veterans forum I'd talk about the Air Force since that's where my experience is and never about the Navy of which I've never been a member. This happens to be a Kubota forum and no less this section is the buying part where people ask buying questions. If I had bad experiences with Barlows I'd be just as vocal about their bad prices and service. Problem is that in 6 years I've bought 10 Kubotas from them and have been satisfied with their prices and service. I believe other owners have posted good words about their dealer and recommend buyers to consider Messicks, for an example, due to their experience with Messicks. I've never bought from Messicks so I have no experience with buying from them. I know they are helpful with demo movies and other good services. If I had bought 10 Kubotas from them and they treated me right with price and service, I would be encouraging people to contact them for pricing before buying and people probably should. TBN has a constant influx of new members and then us that have been members over a year. I've read about others on this board enough to feel like I sort of know them but new members need new answers. Are you suggesting or implying that I should not answer a question or offer what I believe, as a Kubota owner, a good proven to me Kubota dealer to consider? Why would/do you care if I express my good experience with buying from Barlows or my opinions based on my experience?
GOOD FOR YOU JOHNTHOMAS.... It is good to hear the positive about someone once in a while. If I was closer I would try Barlows myself but I must say I have a dealer in my area that might even beat Barlows. The good dealers deserve our business and they deserve our free advertising.
As a long time lurker who lives on 1/2 acre in Roswell, Ga. with a push mower and a lot of dreams, I have finally been pushed into registering. JohnThomas I have followed your many posts with interest and chuckles, but you have gone too far.....Taco Bell? My colon started rumbling just reading those words....and I love tacos..tongue tacos, tripe tacos, fish tacos...but please, please, JohnThomas...not Taco Bell...
Here are some similar links:
