OP
NH-Rob
Gold Member
- Joined
- Feb 27, 2008
- Messages
- 319
- Location
- Northern NH
- Tractor
- Kubota B7510HSD(sold) B3200(new 6/15/09)
b3200 hydraulic loop?
- Thread starter NH-Rob
- Start date
- Views: 8345
-
- Tags
- kubota b3200
jas67
Platinum Member
Rob,
You should be able to just insert it in the loop just before or after your FEL (at the front block). Then just tee your tank return line in with the tank return line of the FEL.
Regards,
Jay
You should be able to just insert it in the loop just before or after your FEL (at the front block). Then just tee your tank return line in with the tank return line of the FEL.
Regards,
Jay
Ductape
Elite Member
A Woods BH80X
OP
NH-Rob
Gold Member
- Joined
- Feb 27, 2008
- Messages
- 319
- Location
- Northern NH
- Tractor
- Kubota B7510HSD(sold) B3200(new 6/15/09)
In this picture I followed the lines and the one I said goes to the 3pt hitch goes into the transmision case around the area of the 3pt hitch. I would think it is the line that I should be tapping into. Does this sound right?
Ductape
I noticed in your profile that it was a bh80x right after I posted the question. I aked because I am thinking about used backhoes and your 3030 is similer in size.
Rob
Ductape
I noticed in your profile that it was a bh80x right after I posted the question. I aked because I am thinking about used backhoes and your 3030 is similer in size.
Rob
Attachments
Firefighter Kubota
Platinum Member
Rob, Do you have a dealer near you? When I did mine, I fount a similiar model on the lot with a BH and crawed under and traced the lines, and rough sketched it out on paper.
If not let me know as I drive by one regularly and could probably stop. I'm sure I need something there...
Made life so much easier... Just a thought...
If not let me know as I drive by one regularly and could probably stop. I'm sure I need something there...
Made life so much easier... Just a thought...
OP
NH-Rob
Gold Member
- Joined
- Feb 27, 2008
- Messages
- 319
- Location
- Northern NH
- Tractor
- Kubota B7510HSD(sold) B3200(new 6/15/09)
firefighter kubota,
If all goes well I will be in the area of the dealer tomarrow. I am going to price out a loop and get more info on the rear remote kit. My factory service manual should be in as well.
Rob
If all goes well I will be in the area of the dealer tomarrow. I am going to price out a loop and get more info on the rear remote kit. My factory service manual should be in as well.
Rob
OP
NH-Rob
Gold Member
- Joined
- Feb 27, 2008
- Messages
- 319
- Location
- Northern NH
- Tractor
- Kubota B7510HSD(sold) B3200(new 6/15/09)
Gr333,
That would help me out a lot. I did not make it to the dealer today and might not for a few days. If you can, take some pictures of the hoses that run from the backhoe to the tractor.
Rob
That would help me out a lot. I did not make it to the dealer today and might not for a few days. If you can, take some pictures of the hoses that run from the backhoe to the tractor.
Rob
Firefighter Kubota
Platinum Member
Rob , if you had kept your 7510, you wouldn't have to deal with this!
-Sam
-Sam
OP
NH-Rob
Gold Member
- Joined
- Feb 27, 2008
- Messages
- 319
- Location
- Northern NH
- Tractor
- Kubota B7510HSD(sold) B3200(new 6/15/09)
Firefieghter kubota,
I could of bought the 3030 and had a outlet on the rear and it would have been easy. But did not care for the tractor.
Rob
I could of bought the 3030 and had a outlet on the rear and it would have been easy. But did not care for the tractor.
Rob
Similar threads
